• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• The Korean Journal of Community Living Science
• /
• v.23 no.3
• /
• pp.339-346
• /
• 2012

The quality characteristics of kochujang added with additives of different ratios of rice-nuruk (at 1:0.7, 1:1.0, 1:1.3) were studied. The kochujang was stored for 8 weeks at $20{\pm}3^{\circ}C$. The brix tended to increase by increasing mixing ratio of rice-nuruk in all treatments. It increased rapidly up to 4 weeks fermentation and then showed a slight change after 6 weeks. The more mixing ratio of rice-nuruk increased, the more salinity of samples decreased. The initial pH value of kochujang was 5.08-5.10., however, the pH value decreased to 4.82-4.83 after an 8 weeks of storage period. The initial acid value was 0.66-0.68 and increased from 0.66-0.68 to 0.87-0.89. It had slight reduction phenomenon in the sixth week. As the aging period passed, chromaticity such as $a^*$- and $b^*$-values decreased gradually except for $L^*$-value. The moisture content of samples decreased gradually by adding rice-nuruk. but increased by passing an aging period. The initial amino nitrogen content of sample was 304-315 mg%. It increased to 399-442 mg% during the aging period. As the aging period passed, the total cell number increased from 6.81 log CFU/mL to 7.01 log CFU/mL in the fourth week and then steadily decreased to 6.66 log CFU/mL in the eight week. Results of sensory evaluation show that, as more rice-nuruk was added, the kochujang received a lower mark. There was no significant difference in flavor in all treatments. Color and sweetness with increasing amounts of rice-nuruk showed the lowest score. Saltiness rice-nuruk at the ratio of 1:1.0 was the highest at 6.22 points. Texture scores decreased with increasing amounts of the rice-nuruk Based on these results, the overall acceptability of the 1:0.7 rice-nuruk treatment which received the highest score is considered excellent.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.110-115
• /
• 2008

Purpose: The objective of this study is to propose an effective management of unstable zygomatic arch fracture. The reduction methods of arch fracture were relatively simple but the maintenance of reduction state is very troublesome. On this, authors introduce an effective management method of unstable zygomatic arch fracture. Methods: Authors experienced 23 cases of unstable segmental zygomatic arch fractures and used Thermo-splint in all cases. All the arch fractures were reduced through Gillies' approach under the general anesthesia. After the reduction, the most effective suspension points were marked on the covering skin of the fractured arch. A needle of heavy nonabsorbable suture material was inserted toward the marking site under the reduced zygomatic arch. And then Therm-splint was dipped in the hot water, and we got the splint pattern of patient face. Reshaped Thermo-splint was trimmed and fixated with previous suspension suture materials. More additive suspension was done if necessary. The splint was applied for in two to three weeks postoperatively. Results: In all the cases, good cosmetic and functional results were observed without severe complications. There were 4 cases of incomplete reductions but they also had no specific problems. There were no facial nerve symptom and scar(stitch mark). Postoperative slight tenderness and trismus were completely subsided after removal of the splint. Conclusion: The Thermo-splint safely protect and maintain the postoperative reduction state. The application, maintenance and removal were easy and simple. It could be reformed to any contour of face and had enough rigidity for supporting. Above all these things, effective prevention of displacement and easy manipulation were significant merit. Authors experienced good results with Thermo-splint, and would introduce it for another method of management of zygomatic arch fracture.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.47-57
• /
• 2003

The purpose of this study was to evaluate the problem on activities of daily living ; the problem which spinal cord injured patients have when they adapt in daily living ; Subjects were 113 members who used the hospital which is located in Kwangju-city from November 20, 2001 to May 20, 2002. The evaluation of the ADL was performed according to MBI and collected data were statistically analysed by SPSS PC for paired Chi-square test T-test, One way ANOVA and Duncan's post-hoc test. The result's were as follows; 1. Modified Barthel Index average mark was $63.77{\pm}33.60$ points and MBI score distribution according to characteristics of injury is as following. 1) A patient who had long duration of injury, small injury region, incomplete paralysis in paralysis degree, paraplegia in paralysis type got high MBI score as statistical and significantly(p<0.05). 2. Society adaptation state by characteristics of spinal cord injured is an following. 1) After lapse of time of disease, a patient who is injured for a long term present surrounding environmental problem, a patient who is injured for a short term shows psychological problem. In society activity, as lapse of time of disease is long, patient did many hobby activity and same private club, on the other hand as lapse of time of diseases is short, the others appeared high and significantly as statistical(p<0.01). 2) In society activity by injury region, cervical injury and thoracic injury did more hobby activity than lumbar injury and in lumbar injury same private club or religion life appeared higher than thoracic injury of cervical injury significantly as statistical(p<0.01). 3) In walk method by paralysis degree Complete paralysis had more wheelchair life than incomplete paralysis(p<0.01). 4) In serious problem by paralysis type psychological problem in quadriplegia and surrounding environmental problem in paraplegia appeared high and significantly as statistical(p<0.01). 3. In society adaptation state by MBI score difference between variables appeared but it wasn't significantly.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.3
• /
• pp.220-229
• /
• 2011

This study attempted to understand the perception and the degree of trust that consumers had in the national agricultural food accreditation system, to inquire into and examine the consumers' perception of traditional food quality certification performed for the protection of excellent traditional food, and to propose the right direction for the policies on the traditional food quality certification system and the plans to improve consumers' perception of the system. According to the results of this survey performed in married women, based on the 'the recognition of accreditation system' and 'the recognition of certification marks' of 'the seventh national agricultural food accreditation system' presently being used by the Ministry for Food, Agriculture, Forestry and Fisheries, the household food purchasers showed high recognition for eco-friendly agricultural product accreditation, processed food KS certification, and organically processed food certification in that order. Meanwhile, it was shown that they indicated low recognition for the traditional food-related accreditation systems such as 'traditional food quality certification' and 'food grand master'. It was found that reliability of the certification mark provided by the agricultural food accreditation system gained 3.54 points (on a 5-point scale), and 68.1% of the study subjects referred to the certification marks while purchasing agricultural foods. And most of them answered to the question of 'why they referred to the certification marks' saying that it was done 'to choose safe food'. The most frequent answer to question of 'the means to recognize the traditional food quality certification system' was 'broadcasting, advertising'. 57.3% of the subjects had a previous experience of buying a product certified by the traditional food quality certification system, and 93.2% of all the subjects had the intention to buy a product certified by the traditional food quality certification system later. And most of them answered that 'strengthening government policies' would be the most ideal way to inform the public of the traditional food quality certification system. According to the results of this study, while 'relying on the traditional food quality certification system in general' was relatively high among the consumers, 'intention to buy quality certified products by visiting a distantly located store' was low; thus, from this analysis, it can be seen that there is a need for diversification of places selling these quality certified products and to establish a distribution network for these products.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.389-396
• /
• 2000

To determine whether the Tricholoma matsutake (pine mushroom, Songyi) is symbiotic or parasitic to Pinus densiflora, structural change in their natural ectomycorrhizas were examined. The mycorrhizal samples were collected at three progressional points in the natural hypogeous colony(shiro) : colony front edge, near the fruiting point and 20cm back. The fine roots in the colonies were typical ectomycorrhizas with fungal mantle and Hartig net. However, the T. matsutake mycorrhizas had unique characteristics compared to other types of ectomycorrhizas. That is, spatially the fungal mantle and Hartig net of the T. matsutake mycorrhizas continued to develop along the growing tip, while temporally those structures declined to shrink changing to black brown in the older part of the roots behind the actively growing tip portion. However, there was no mark that the fungal hyphae penetrated into either the cortical cells, endodermal cell layers or stele. The apical tips of the blackened roots remained alive to form new mycorrhizas with other fungi later. Therefore, we conclude that the mycorrhiza of T. matsutake+P. densiflora is rather a dynamic symbiosis that changes its position spatiotemporally as the root grows than either a simple parasitism or symbiosis.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.81-90
• /
• 1999

This paper describes an EEG(electroencephalogram) software for two-channel cerebral function monitoring system to detect the cerebral ischemia. In the software, two-channel bipolar analog EEG signals are digitized and from the signals various EEG parameters are extracted and displayed on a monitor in real-time. Digitized EEG signal is transformed by FFT(Fast Fourier transform) and represented as CSA(compressed spectral array) and DSA(density spectral array). Additional 5 parameters, such as alpha ratio, percent delta, spectral edge frequency, total power, and difference in total power, are estimated using the FFT spectra. All of these are effectively merged in a monitor and displayed in real-time. Through animal experiments and clinical trials on men, the software is modified and enhanced. Since the software provides raw EEG, CSA, DSA, simultaneously with additional 5 parameters in a monitor, it is possible to observe patients multilaterally. For easy comparison of patient's status, reference patterns of CSA, DSA can be captured and displayed on top of the monitor. And user can mark events of surgical operation and patient's conditions on the software, this allow him jump to the points of events directly, when reviewing the recorded EEG file afterwards. Other functions, such as forward/backward jump, gain control, file management are equipped and these are operated by simple mouse click. Clinical tests in a university hospital show that the software responds accurately according to the conditions of patients and medical doctors can use the software easily.

• Journal of the Korean Chemical Society
• /
• v.67 no.1
• /
• pp.54-63
• /
• 2023

In this study, six types of 2015 revised curriculum ChemistryII textbooks were analyzed for conditions, definitions, whether or not critical points were displayed, and real-life examples of phase diagram. In this study, it was confirmed that the problems pointed out in several previous studies were not reflected in the 2015 revised curriculum ChemistryII textbook. The same as the situation defining the phase diagram, the translation of the phase diagram into a phase equilibrium diagram, the distinction between phase and state being unclear, the critical point not being shown in the phase diagram, real life examples are very limited what is being presented as is suggested as a problem. Therefore, it is necessary to reflect the results of various previous studies in the revised curriculum ChemistryII textbook that will be made in the future, specify the conditions under which the phase diagram is drawn, newly model the situation defining the phase diagram, and translate the phase diagram as a 'phase diagram'. It is necessary to use the term, clarify the distinction between phase and state, mark the critical point in the phase diagram, and develop various real-life examples.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.400-420
• /
• 1998

We already know that it is very difficult to obtain an "isolated field" for direct bonding during the surgical exposure of unerupted teeth. The aim of this in-vitro study is to simulate the clinical situation of forced eruption and to evaluate the tensile strengths of preligatured button with several types of contamination which can happen during the surgical exposure of unerupted teeth. Four orthodontic direct bonding systems were used. ($Ortho-One^{TM}$, $Rely-a-Bond^{(R)}$, $Ortho-Two^{TM}$, Phase $II^{(R)}$) Each material was divided into four groups(n=20) : Group 1. (Control, no contamination), Group 2. (Rinse etching agent with saline instead of water), Group 3. (Blood contamination of etched surface for 30 seconds), Group 4. (Blood contamination of primed surface for 30 seconds) 320 bovine anterior permanent teeth were divided into the above mentioned 16 groups. Enamel surface was flattened and ground under water coolant. Pre-ligatured buttons were prepared to the same form. (Cut 0.25 ligature wire 10 cm in length. Twist the ligature wire 30 times clockwise. Mark the wire 15mm and 35mm points from button. Make a loop sticking two points together and twist the loop 6 times counterclockwise.) The bonded specimens were stored at $37^{\circ}C$ saline solution for 3 days. Then the tensile strength of each sample was measured with Instron universal testing machine, crosshead speed of 0.5mm/min. The following results were obtained: 1. As compared to control groups (Group 1) of each material, Rely-a-Bond had a significantly lower mean tensile strengths than other material. (p<0.01) 2. In Group 2. of Ortho-One and Rely-a-Bond, the mean tensile strengths decreased about 7.7% and 11.1%, respectively with statistical significances. (p<0.05) 3. In Group 2. of Ortho-Two and Phase II, the mean tensile strengths did not decrease. 4. In Group 3. of Ortho-One, Rely-a-Bond, Ortho-Two, and Phase II, the mean tensile strengths decreased about 60.8%, 56.1%, 60.2%, and 46.0%, respectively with statistical significances. (p<0.01) 5. In Group 4. of Ortho-One and Rely-a-Bond, the mean tensile strengths did not decrease. 6. In Group 4. of Ortho-Two and Phase II, the mean tensile strengths were decreased about 20.95% and 22.28%, respectively with statistical significances. (p<0.01) There were formations of a hump shaped mass from bonding resin under blood contamination which disturbed direct bonding procedure. According to Reynolds, the proper bond strength for clinical manipulation should be at least 45N or about 4.5Kg.F. According to these results, it can be concluded that Ortho-One could be used during surgical exposure of unerupted teeth. In any case, blood contamination of the etched surface should be avoided, but the blood contamination of primed surface of Ortho-One may not decrease bond strength. Just 'blowing-out' is enough to remove blood from primed surface of Ortho-One. You can verify the clean surface of the primer of Ortho-One after blowing out the blood contamination.

• Korean Security Journal
• /
• no.36
• /
• pp.255-292
• /
• 2013

Burglary (also called breaking and entering and sometimes housebreaking) is a crime, the essence of which is illegal entry into a building for the purposes of committing an offence. It is one of the most common types of crime and also a serious issue for every society. A house that is left insecure is an accessible and attractive target for burglars and therefore burglary resistance test & certification system for doors and windows has been developed in many countries. This paper explores several advanced foreign burglary resistance test/certifcation cases (the British SBD, the Dutch KOMO SKH/SKG, the Japanese CP mark, the Australian Standard Certification) for security products and domestic test/certification systems for fire safety products as a comparative study so that any improvement points can be gained for South Korea in the field of security product performance. The comparative analysis results show that South Korea is far behind the security product certification system and needs a lot of improvement in the system by benchmarking foreign cases. The domestic test/certification systems for fire safety products also give some insights for burglary-related security products' performance certification system in Korea. Overall, the need for relevant rules and regulations, the establishment of standards regarding testing and certification, including certified security +hardware product in building security certification system, performance testing as well as production testing (i.e. quality management system evaluation), the basic competency of testers, incentive system for certified/high quality security products were suggested in order to make an optimal model for the security production performance testing and certification system in Korea.