• Journal of Ocean Engineering and Technology
• /
• v.37 no.5
• /
• pp.198-204
• /
• 2023

In response to the complexity and time demands of conventional methods for estimating the hydrodynamic coefficients, this study aims to revolutionize ship maneuvering analysis by utilizing automatic identification system (AIS) data and the Support Vector Regression (SVR) algorithm. The AIS data were collected and processed to remove outliers and impute missing values. The rate of turn (ROT), speed over ground (SOG), course over ground (COG) and heading (HDG) in AIS data were used to calculate the rudder angle and ship velocity components, which were then used as training data for a regression model. The accuracy and efficiency of the algorithm were validated by comparing SVR-based estimated hydrodynamic coefficients and the original hydrodynamic coefficients of the Mariner class vessel. The validated SVR algorithm was then applied to estimate the hydrodynamic coefficients for real ships using AIS data. The turning circle test wassimulated from calculated hydrodynamic coefficients and compared with the AIS data. The research results demonstrate the effectiveness of the SVR model in accurately estimating the hydrodynamic coefficients from the AIS data. In conclusion, this study proposes the viability of employing SVR model and AIS data for accurately estimating the hydrodynamic coefficients. It offers a practical approach to ship maneuvering prediction and control in the maritime industry.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.179-185
• /
• 2024

The model ship of this study, the Baek-Kyung fisheries training ship of Pukyong National University, has a length between perpendiculars of 85 meters, making it not subject to the IMO maneuverability standards. However, understanding the maneuvering characteristics of the vessel is essential for safe navigation. In this regard, this study was conducted to analyze the results from the sea trials of the model ship conducted in accordance with the IMO maneuverability standards. The results of the turning tests met the standards well while in the zig-zag tests, the first overshoot angle exceeded the standard in the 10°/10° test; however, such results met with a difference of 1.8° in the 20°/20° test. Additionally, using the course-stability discrimination formula, the calculated value was -0.0051, indicating unstable course-stability. The results of the stopping tests met the standards well. It is hoped that the analyzed maneuvering characteristics of the model ship from the study results will contribute to the safety of ship navigation.

• Fisheries and Aquatic Sciences
• /
• v.26 no.12
• /
• pp.689-697
• /
• 2023

This study used a multi-frequency acoustic method to assess the density and spatial distribution of dominant zooplankton, euphausiids and copepods, which are representative species of the zooplankton immigrating the sea around Republic of Korea. Acoustic surveys were carried out in the East Sea and South Sea from June 16 to 29, 2017, using the research vessel Tamgu 20th from the National Institute of Fisheries Science. From the results of the acoustic survey, the distribution of euphausiids was relatively higher in the East Sea than in the South Sea. Additionally, although the distribution of copepods was low in all areas, they were abundant in certain areas in the East Sea and the southern area of the Jeju Sea. Euphausiid and copepod density was estimated to be 1.2 g/m² (CV = 19.1%) and 2.8 g/m² (CV = 23.5%), respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.416-422
• /
• 2012

To prevent serious maritime accident and eliminate the cause of the potential maritime accidents, Maritime Safety Audit Scheme was formally institutionalized through amendment of Maritime Traffic Safety Act(May 27, '09). At the initial step of the enforcement of the law, it has risen the necessity of amending the present institution concerning with the range of applicable business, method of practice, detailed technical standards in the assessment articles, etc. Among them, the assessment of marine traffic congestion has been practiced as a mandatory assessment article, but it is analyzed that the assessment doesn't reflect current variation of ships' size and its speed. By analyzing the status of assessments on marine traffic congestion so far and collecting experts' opinion, this paper suggests draft amendments to improve technical standards on the assessment of marine traffic congestion.

• Journal of Navigation and Port Research
• /
• v.33 no.8
• /
• pp.525-530
• /
• 2009

VTS(Vessel Traffic Service) has been established in navigational waters to improve the safety and efficiency of navigation and to prevent marine accidents which could cause a large amount of damages to the marine environment and shipping industries. There have been several reports on analyzing the causes of marine accidents happened around Korean waters of jurisdiction, and those reports contributed not only to the enlargement of waters where VTS operation was needed and but also the construction of VTS system which was necessary to provide vessels navigating in the service waters with safety-related information. However, the researches for the role of VTS in marine transportation were not still enough to increase the safety of navigation and to decrease the number of accidents. In this paper, in view of the fact that VTS operation is closely connected with the accidents, we analyzed that what parts of VTS operation are involved deeply with the causes of marine accidents in Busan Port, and then proposed a method to improve its performance most effectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.681-687
• /
• 2014

The objective of this work presented here was focused on analysis of in-cylinder combustion characteristic, engine performance, and nitrogen oxides emission characteristic from marine gas oil for propulsion diesel engine of naval vessels and biodiesel with fuel injection timing in a single cylinder diesel engine. In addition, combustion process was analyzed with a high speed camera of marine gas oil and biodiesel fuel. Retarding the fuel injection timing from $BTDC25^{\circ}CA$ to $BTDC5^{\circ}CA$, in cylinder peak combustion pressure was gradually decreased, however, engine torque showed a tendency to increase. The highest nitrogen oxides level was measured at $BTDC15^{\circ}CA$, they were reduced at retarded and advanced condition on the basis of $BTDC15^{\circ}CA$. Comparing with combustion process of marine gas oil and biodiesel fuel at $BTDC5^{\circ}CA$, self-ignition timing of biodiesel fuel included oxygen content was faster than marine gas oil, however, a cautious observation indicates a slightly higher flame intensity for marin gas oil than biodiesel as a diffusion flame is developing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.688-696
• /
• 2023

In the present study, free roll decay and resistance performances of fishing vessels were evaluated with the combinations and variations of in the parameters of appendages which are attached to improve motion performance of fishing vessels. Computational Ffluid Ddynamics was used to perform free roll decay and resistance analysis. The roll period and decay coefficient were derived by the variations in the combination and dimensions of the primary appendages of the bilge keel and the under keel. It was observed thatThe variations of in the length of the under keel did not significantly impact to the roll damping coefficient. Conversely, for the bilge keel, an increase in the length and angle resulted in an increase in the roll damping coefficient. Comparison of resistance performance was additionally assessed among the selected hulls with the appendages and bare hull. The resistance of the hull with the appendages was higher than that of the bare hull due owing to the changes of in the pressure on the surface of the hull and trim angle. Throughout the present study, the impact of appendage parameter and arrangement on the free roll decay and resistance performance of fishing vessels were was assessed,. which This will be beneficial for the application of appendages to fishing vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.127-134
• /
• 2024

With the growth of offshore wind power generation market, the corresponding installation vessel market is also growing. It is anticipated that approximately 100 installation vessels will be required in the of shore wind power generation market by 2030. With a price range of 300 to 400 billion Korean won per vessel, this represents a high-value market compared to merchant vessels. Particularly, the demand for large installation vessels with a capacity of 11 MW or more is increasing. The rapid growth of the offshore wind power generation market in the Asia-Pacific region, centered around China, has led to several discussions on orders for operational installation vessels in this region. The seabed geology in the Asia-Pacific region is dominated by clay layers with low bearing capacity. Owing to these characteristics, during vessel operations, significant spudcan and leg penetration depths occur as the installation vessel rises and descends above the water surface. In this study, using penetration variables ranging from 3 to 21 m, the unique vibration period, structural safety of the legs, and conductivity safety index were assessed based on penetration depths. As the penetration depth increases, the natural vibration period and the moment length of the leg become shorter, increasing the margin of structural strength. It is safe against overturning moment at all angles of incidence, and the maximum value occurs at 270 degrees. The conditions reviewed through this study can be used as crucial data to determine the operation of the legs according to the penetration depth when developing operating procedures for WTIV in soft soil. In conclusion, accurately determining the safety of the leg structure according to the penetration depth is directly related to the safety of the WTIV.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.143-156
• /
• 2014

We reviewed investigation status on turbidity plume in the statement of marine environmental survey(2008 to 2012) associated with marine sand extraction projects. The survey statement from seven marine sand extraction sites (extraction area of Southern EEZ, extraction area of Western EEZ, relocation zone in the Western EEZ, sea area under jurisdiction of Taean-gun, sea area under jurisdiction of Ansan City, and two discrete sea areas under jurisdiction of Ongjin-gun) in the nearshore and offshore of Korea showed that in situ observations were carried out for the dispersion and transport of suspended sediments on two areas (One is a extraction area in the EEZs, the other is an area of coastal sites). However, sampling station and range have not been selected considering physical, geographical factors (tide, wave, stratification, water depth, etc.) and weather conditions (wind direction and velocity, fetch, duration, etc). Especially turbidity plumes originating from three sources, which include suspended sediments in overflow(or overspill) discharged from spillways and reject chutes of dredging vessel, and resuspended sediments from draghead at the seabed, may be transported to a far greater distance outside the boundary of the extraction site and have undesirable impacts on the marine environment and ecosystem. We address that behaviour of environmental pollutants such as suspended solids, nutrients, and metals should be extensively monitored and diagnosed during the dispersion and transport of the plume. Finally we suggest the necessity to supplement the current system of the sea area utilization consultation and establish the combined guidelines on marine sand extraction to collect basic data, to monitor cumulative effects, and to minimize environmental damages incurred by the aftermath of sand extraction.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.41-49
• /
• 2003

Marine traffic management could be defined as the implementation of managerial technical measures to improve vessel traffic safety. The managerial elements of vessel traffic management for ports and harbours or narrow channels include the total amount of traffic control, the vessel traffic separation scheme, speed restriction, traffic control by signals, the navigation information service and so forth. This research aims to quantify how much the traffic separation schemes(TSS) contribute to the alleviation effect of ship handling difficulty and to propose a design standard when the individual management measure is applied in an actual waterway. Traffic separation schemes have now been established in most of the major routes and congested waters of the world, and the number of collisions and groundings have often been dramatically reduced. In this part, the relationship between the alleviation of ship handling difficulty and the reduction of encounter figures among ships is quantitatively clarified by applying the ES model. As results of simulation analysis, it is recognized that a traffic separation system is most effective in the case of narrow width and heavy traffic volume. The centre buoy installation reduces about 1/4 of the alleviation of ship handling difficulty, TSS establishment 1/3, and design change to one-way traffic from two-way traffic reduces 1/2.