• Journal of the Korean Geosynthetics Society
• /
• v.4 no.2
• /
• pp.11-18
• /
• 2005

A pilot scale filed model test and 2-D numerical analysis was conducted to evaluate the effectiveness of constructing a geogrid-reinforced and pile-supported embankment system over soft ground to reduce differential settlement, and the results are presented hearin. Three-by-three pile groups with varying the space between pile were driven into a layer of soft marine clay and a layer of geogrid was used as reinforcement over each pile group. 2-D numerical analysis has been conducted by using the FLAC-2D(Fast Lagrangian Analysis of Continua) program for same condition of field model test. The settlement, vertical stress, and strain of geogrid due to the construction of embankment were measured at various locations. Based on the field model test and numerical analysis results, pile reinforcement generated the soil arching at the midspan of pile cap and the geogrid reinforcement helps reduce the differential settlement of the soft ground by tensile strength of geogrid. Also for $D/b{\geq}6.0$, the effectiveness of geogrid reinforcement in reducing settlement is negligible.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.46-53
• /
• 2005

This paper describes the mean grain size and shear strength properties related to subsidence characteristics using sediment samples and acoustic images obtained from artificial reef areas in Tongyoung and Jangsungpo offshore. The acoustic images collected from chirp sonar and side scan sonar show well the attitude/orientation, the distribution pattern, and the degree of subsidence of artificial reefs, suggesting the possibility of suitable site investigation and the management of the reefs using acoustic sonar. The sediments were largely composed of clayey silt and silty clay. The mean grain sizes in Tongyoung and Jangsungpo offshore show the ranges of 5${\sim}$9${\Phi}$ and 8${\sim}$9${\Phi}$, respectively. The shear strength was significantly increased at the depths of 20cm in Tongyoung offshore and 80cm in Jangsungpo offshore, corresponding to the subsidence depth of artificial reefs. The relationship between mean grain size and shear strength did not show a correlation, suggesting the shear strength does not totally depend on mean grain size. Provided subsidence characteristics with respect to various artificial reefs and seabed condition are investigated in more details, the constructing area of the reef can be more extended.

• The Korean Journal of Quaternary Research
• /
• v.1 no.1
• /
• pp.3-20
• /
• 1987

With regard to the Quaternary formations in the Korean Peninsula, very few studies have been done specially from a stratigraphic viewpoint. The alluvial sediments filling in the valleys have often been considered as the only formation of Quaternary age (more precisely of the Holocone) and so the Pleistocene was regarded as an erosional or nondepositional episode. This is apparently evident from a quick look at the general geological maps of the Peninsula, which show a lithological sequence of Mesozoic or Paleozoic substrata immediately overlain by Holocene alluvium. Likewise, the Pleistocene period was described in terms of unconformity in most local or regional stratigraphical successions of the Peninsula. Recently several different types of Quaternary formation, besides the so-called Holocene alluvium in the valley plain have been found around the Peninsula. They consist of coastal deposits, marine or fluviatile terrace deposits, ancient valley fill deposits or slope deposits. Some parts of the volcanic sediments in Jeju Is. are also known as the Quaternary sequence. Thus the Quaternary deposits in the Peninsula are far more developed than previously known to gelolgists. Moreover the importance of Quaternary research became recently apparent in Korea due to the shortage of raw materials and to the policy of an optimum land-use. Advanced constructions and land reclamation have required more precise engineering parameters of loose materials and an estimation of land stability. This does not imply only the engineering, or the structural properties of the loose material, but at the same time the basic study of the sediments from the stratigraphical and environmental viewpoints has been necessary. In this connection, Quaternary outcrops specially along the coastal fringe of the Peninsula have been mapped, profiled and sampled for sedimentological, clay-mineralogical and palaeomagnetic studies. All these results are compiled for the core of the Quaternary stratigraphy of the Peninsula.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.1-6
• /
• 1983

The results of COLE(Coefficient of Linear Extensibility) measurement on various paddy soils in Korea are summarized as follows; 1. The COLE values of paddy soil in Korea varied from 0.024 to 0.094 in the surface soil while in the sub-surface soils those were ranging from 0.022 to 0.115. The poorer the relative drainage and the finer the texture caused, the greater the COLE values. 2. The matured clayey soils on fluvio-marine plains and local alluvium derived from the Tertiary materials have COLE values more than 0.09 which is demonstrated that the necessity of COLE measurement throughout profiles so that could be considered the characteristic in the characteristic of those soils. 3. The clay content has the highest positive correlation (r=0.81~0.76) values. The content of organic matter, water content at 1/3 bar, Atterberg limits, water stable aggregate etc. also have significant positive correlation with COLE values while the context of sand and silt show negative correlation. 4. Although the COLE values measured on horizontal linear bases were slightly greater than those measured on volume bases practicability was for granted. For more accurate measurement of COLE, it is reasonable to have the average values of COLE calculated from the horizontal and vertical bases.

• Journal of Aquaculture
• /
• v.8 no.2
• /
• pp.85-98
• /
• 1995

In Kunsan coastal areas, there are some plans to construct industrial zone and, it will affect physical and chemical parameters of marine environment of the area. As one of many environmental surveys on the aquacultural farm in Korean west coast, the survey on the bottom sediment characteristics of intertidal farm was conducted from May 1992 to April 1993. Dominant grain size was fine sand $(69-98\%)$ and the pH of sediment was ranged of $7.2\~9.1$. Especially the pH increased after embank was constructed. The water holding capacity was $11.1-28.1\%$ and showed high value in silt and clay area. The COD was 1.27 mg/g dry mud and increased after embank was constructed. The total organic matter content ranged of $0.84-8.11\%$ and the DO absorption was $0\~6.56 mg/g$ dry mud. The value of DO absorption showed low in winter and spring, but high in summer and fall. The total nitrogen and the sulfide were rang of $0\~402{\mu}g/g$ dry mud and $0\~122{\mu}g/g$ dry mud respectively. These values were high in summer and winter season, and higher in upper layer than that of lower layer in general.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.311-324
• /
• 2006

In the Pohang-Gampo area, several diatomite beds occurred in mostly thinner than 1 m are embedded in the Pohang Formation of marine environment and the pyroclastic Eoil Formation. The diatomite from the Eoil Formation is constituting the high-grade ore altered slightly by diagenesis. In contrast, the diatomite intercalated within the upper horizon of the Yeonil Group is comparatively low-grade and highly altered in places. During diagenesis, an increasing of crystallinity of opal, i.e., the original mineral component of diatom, results in ultimately the mineral transition to quartz with accompanying a drastic change in morphology and texture of the altered diatomite. The diagenetic alteration appears to have undergone by way of the chemical diagenesis, which is largely controlled by degree of fluid contact, rather than burial diagenesis. For the diatomite from the Pohang-Gampo area, careful SEM observations, XRD, chemical analyses, and determination of specific surface area were done to identify the fossil species, mineral and chemical composition, and other physical properties in the view of assesment of grade and quality. The domestic diatomite ores are evaluated to be not good in grade and quality, compared to those of famous foreign localities. However, some diatomite deposits of marin,: origin from the Pohang Formation is constituting a peculiar clay-rich type, i.e., moler applicable to the special usage such as a manufacturing of lightweight brick. Because such a diatomite is frequently intercalated relatively as a thicker bed in the upper part of the Yeonil Group, a systematic and careful investigation should be done for the exploitation and development of an economic diatomite deposit of the moler type.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.5-15
• /
• 2011

Conventional designs of landfill covers use geosynthetics such as geomembrane and GCL, and clay liners to lower the permeability of final covers of landfill sites. However, differential settlement and the variation of temperature or humidity in landfill sites cause the development of cracks or structural damage inside the final cover. This study examined the application of a Self Recovering Sustainable Liner (SRSL) as an alternative landfill final cover material. SRSL consists of double layers, which have chemicals, can generate precipitates filling the pores of the layers by chemical reaction. The interface material forms an impermeable layer and in case of internal cracks, the reactants of the two layers migrate towards the crack and heal it by forming another liner. In this study the applicability of SRSL material for landfill final cover was examined by performing flexible wall permeameter tests to prove that the hydraulic conductivity is lower than the regulations and unconfined compression tests to judge whether the strength satisfies the restriction for the landfill final cover. Furthermore, the environmental impacts on the permeability and strength were evaluated. The experimental results show that the SRSL has lower hydraulic conductivity and higher strength than the regulations and is little influenced by climatic changes such as wet/dry or freeze/thaw process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.6
• /
• pp.399-412
• /
• 2005

This study investigated the composition and the distribution of the benthic polychaeta community in the semi-enclosed Yoja Bay on the southern coast of Korea and was designed to deduce temporal changes in the community with the comparison of the previous studies. In YoJa Bay, benthic polychaetous community structure was investigated on the base of the samples from 87 stations. The surface sediment was mainly composed of fine-grained sediment, mixed clayey silt and silty clay. The total benthic macrofaunal density was $387 indiv./m^2$, and the density was higher in the middle bay, and in the mouth of bay than in the inner bay. scapharca subcrenata (Bivalvia) and amphipods (Crustacea) were important species in the inner and the middle of the bar, respectively. Benthic polychaetes were comprised of 72 species with a mean density of $149 indiv./m^2$. Their distributions showed higher densities in the mouth of bay than in the rest of bay. The dominant species over 1.0 percentages were composed of the 20 species, and they occupied $84.5\%$ of the total density. The most dominant species was Sternaspis scutata ($13.6\%$), fallowed fly Heteromastus filiformis ($9.8\%$), Polynoidae indet. ($8.3\%$), Sigambra tentacuzata ($7.1\%$) and others. The cluster analysis revealed that the study area was divided into three station groups. At the station group YI located in the inner bay, the most dominant species was Heteromastus filiformis . At the station group YII in the middle bay, the dominant species was Sternaspis scutata. And at the station group YIII in the mouth of bay, the dominant species was Paraiacydonia paradoxa. Whereas Sternaspis scutata and Mediomastus sp. were the dominant species in the past study, Heteromastus filiformis and Tharyx sp. appeared newly to be the dominant species, even if their low densities that in the past. These facts mean that Yoja Bay be maintained yet as little polluted area compared to other bays on the coast of Korea, but needed some caution of marine environmental management.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.33-40
• /
• 2014

In this paper, mechanical and germination characteristics of stabilized dredged soils were investigated to recycle dredged soil in eco-friendly manner such as waterfront construction. Non sintering binder (NSB), which was developed by using interchemical reactions between slag, high-calcium fly ash, alkali activator on the dredged marine clay, was added to dredged soil. Ordinary portland cement was also used for the comparison of two binders. Experimental tests such as flow test and unconfined compressive test were carried out to evaluate characteristics of stabilized dredged soil. Leaching test, pH measure, vegetation germination test were also conducted to consider environmental applicability. The unconfined compressive tests shows that unconfined compressive strength (UCS) also increases with the increase of curing time and mixed ratio. UCS of NSB mixtures were higher than those of OPC mixtures. Germination tests showed that germination and sprouting date are better in NSB mixture than OPC mixture. It can be explained that germination decreased as pH and 7-day strength increased.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.7
• /
• pp.47-57
• /
• 2011

The p-y curve has been used to design pile foundations subjected to lateral loading. Although the p-y curve has a large influence on the pile lateral behavior, p-y curves have not been clearly suggested. In this study, the p-y curve of clay was evaluated for drilled shafts in marine deposits by using 3-dimensional numerical analyses. First, the optimization study was performed to properly determine boundary extent, mesh size, and interface stiffness. The numerical modeling in the study was verified by comparing the calculated and the pile loading test results. Then, the p-y curves of single and group piles were evaluated from the parametric study. The selected parameters were pile diameter, pile Young's modulus and pile head fixed condition for a single pile, and pile spacing for group piles. Finally, the p-multiplier was evaluated by comparing the p-y curves of a single pile and group piles. As a result, the p-multiplier at pile spacing of 3D was 0.83, 0.67 and 0.78 for the front, middle, and back row piles, respectively, and showed values similar to those of O'Neill and Reese (1999). For the pile group with pile spacing larger than 60, the group effect can be ignorable.