• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.435-444
• /
• 2012

High performance concrete mixes are selected and corresponding test specimens are made for the study of chloride diffusion coefficient at reference time. The concrete mixes were same designs as those used in construction of bridges located in a marine environment. Mix design variables included binder type, water-to-binder ratio, mineral admixtures to total binder weight substitution ratio, fine aggregate source, chemical water reducer admixture type for high strength and high flowability, and target slump or slump flow. The test results showed that the diffusion coefficients at reference time varied significantly according to the type of mineral admixtures and their substitution ratios. A model for diffusion coefficient at reference time considering the type of mineral admixture and the substitution ratio was developed. Diffusion coefficients from the developed model were compared with those from literature review, a previous model, and additional test results. All of the comparisons verified that the developed model can reasonably predict diffusion coefficients and the application of the model to the durability design against chloride penetration is appropriate.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.2
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.128-133
• /
• 2014

This paper is the study of BNWAS based on TLC. The functionality of BNWAS and its operations are investigated through its international standard. But the BNWAS to be used currently in the ship have difficulty in monitoring. Several kinds of data are generated from many equipments in BNWAS, such as NMEA-0183 data or NMEA-2000. Although these data are mainly used for the safe navigation of ship, their usability may be enhanced if they are managed to control the BNWAS equipment with sensors. The purpose of this system is prevent the marine accidents on sailing voyages due to drowsiness of watchers. On Night sailing, watcher is collected the navigation information from multiple devices and he determines the safe operation of the ship through continuous monitoring.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.139-144
• /
• 2007

The vibration generated on shipboard is very important because it is greatly affect on the comfortable mind of passenger and working conditions et crews. Shipboard vibration is closely concerned with the development of propulsion method tint is main engine to decide speed of ship. To make the propulsion power, the main engine of ship engine room have continuous explosion process, so the shipboard vibration is generated The physiological damage and psychological damage of human body have caused by the vibration et shipboard In the case of the human body is exposed to the shipboard vibration, the evaluation of human exposure to whole-body vibration is prescribed in ISO 6954: 2000(E). In this paper, to evaluate the shipboard working environment, the vibration levels of two kinds of ship onboard were measured and compared with engine rooms, engine control rooms and bridges by the regulation of ISO 6954: 2000(E)

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.940-946
• /
• 2015

In this paper, we study a method that amplifies the output gain of a high voltage pulse using 300 kHz or higher frequency. We conducted a study on a method for amplifying the output gain using the resonance between the capacitance components of the load and the parasitic components of the circuit, instead of the conservative method for amplifying the pulse-amplitude by raising the voltage of the power stage. In particular, the method simplifies the circuit configuration throughout the appliance of flyback-type topology instead of the bridge-type. There are advantages that prevent damage from overload and the heat in the output circuit through the hard switching by amplifying the gain of the output voltage applying to the load as given by the capacitance component of the output electrode to the output pulse waveform. This study proposed a method to enhance the spatial and electrical efficiency of the contact-type heating device through the dielectric heating method applied to the field of medical and industrial heating.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.451-456
• /
• 2018

UAVs (Unmanned Aerial Vehicles) are widely used for maintenance and monitoring of facilities. It is necessary to acquire a high-resolution image for evaluating the appearance state of the facility in safety inspection. In addition, it is essential to acquire the video data in order to acquire data over a wide area rapidly. In general, since video data does not include position information, it is difficult to analyze the actual size of the inspection object quantitatively. In this study, we evaluated the utilization of 3D point cloud data of bridges using a matching between video frames and reference photos. The drones were used to acquire video and photographs. And exterior orientations of the video frames were generated through feature point matching with reference photos. Experimental results showed that the accuracy of the video frame data is similar to that of the reference photos. Furthermore, the point cloud data generated by using video frames represented the shape and size of bridges with usable accuracy. If the stability of the product is verified through the matching test of various conditions in the future, it is expected that the video-based facility modeling and inspection will be effectively conducted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.228-235
• /
• 2021

Marine accidents caused by ships are very diverse, such as collision, sinking, stranding, grounding and fire. In particular, persons on passenger ship are unspecified and not trained, so it makes evacuation harder. For this reason, an evacuation plan that considers diverse situation in ship is needed. Effective evacuation planning requires training in consideration of various evacuation situations. In this paper, we investigated the time elapsed on evacuation in various situations from "HANMIR," the fishery training ship of the Korean Institute of Maritime and Fisheries Technology, using a Ship Evacuation Analysis Program (SEA-Pro) which is introduced to the society. We assumed a situation that has not only inconveniences for real training but also the possibilities of happening. Not all trainees are resting in their cabin, so we assumed positions such as they are in the bridge or engine room and applied fire and flooding situations. We assumed that the time for alerting the situation would be short, so we applied only elapsed time of movement. Those analyses could be helpful in three ways. The first is predicting the consequence of possible accidents. There are some conditions that can be appliable to this model, such as the decreased area of sight in those situations. The second is concluding the optimal limit of carriage and placement of safety instruments on building a new ship. The third is to be a base data for ships to make a new effective evacuation plan based on these analyses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.628-638
• /
• 2023

Maritime Autonomous Surface ships(MASS) are gradually gaining importance. Until fully autonomous ships are developed, they will likely be controlled by remote operators who are based in a Remote Operations Center. However, there is currently no internationally or domestically established licensing for them. This issue can potentially pose a risk to navigation safety due to operations being handled by unqualified remote operators. We conducted a literature review and proposed criteria for the adoption of a licensing system for remote operators. We have futher offered alternatives to integrate this license into the existing officer licensing system, and analyzed them using Analytic Hierarchy Process(AHP). Subsequently,, theprimary need to enact legislation for remote operators is observed. The most preferred approach is to include the occupation of a remote operator in the Ship Officer Act, Article 4: Occupational Categories and Class of Licenses. Therefore, it would be logical for the organizational structure of the Remote Operation Center to mirror the traditional Bridge Resource Management. This study will contribute to the efficient training of remote operators and the safe navigation of autonomous ships with a focus on human resource management.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.2
• /
• pp.70-78
• /
• 2002

The landscape disign of Gamcheon wholesale fish Market was designed around a turnkey base to promote the economy of Busan Metropolitan City, to establish a fishery marketing center and to modernize existing facilities. The objectives of the project were to promote the mood of an old market, while preserving its functions and efficiency as a market, to design outdoor spaces with natural resources and amenities in balance, and to create attractive tourist spots in connection with the wide area development plan. The project was oriented, fast, to enhance the functions of the market. For this purpose, a multi-dimensional space layout was designed in consideration of functions as a wholesale market. The safety of pedestrians was secured by separating lathes for vehicles and for pedestrians. Tree planting with various functions such as sheltering, wind breaking and guiding was planned. Secondly, nature-friendly and human-friendly landscaping design was attempted. For this, the beautiful natural resources of Amnam Park were utilized, and green spaces such as green bridges linking buildings in the wholesale market, and rooftop gardens were to be arranged. In addition, environment-friendly facilities such as roads paved with natural materials(i.e. gravel, shells) and program parking lots were to be planned. Thirdly, landscape design was considered to create attractive tourist spots. For example, a fish farm was created as a theme street for pedestrians and various water-friendly spaces such as pedestrian ramps, observatories and seaside streets were to be secured. The main contents are as follows. First, a green bridge to Ahnnam Park was introduced for a tour source and flower garden, an event plan and viewing deck open to the sea were planned on the bridge's axis. Secondly, for the effective land use plan concerning open space and convenience to visitors, a promenade was planned, which is connected with the theme plaza and small plazas by environmental sculptures in front of the market hall and at the gate. As well, an observatory and a roof garden help create three dimensional multi leveled space, with a good view of the natural landscape of the sea, sky and park Thirdly, landscape materials, such as trees and those for facilities, strengthened for protection against the seawind and salt damage were selected. The commercial market area was intended to be transformed a traditional functional area of efficiency and economy into an attractive marine leisure area where both tourists and neighbors can make use of it.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.1
• /
• pp.25-35
• /
• 2010

The biodiversity of eukaryotic plankton has commonly been used to evaluate the status of aquatic ecosystems. Therefore, an accurate and rapid method for species identification is needed to reveal the biodiversity of environmental water samples. To date, molecular methods have provided a great deal of information that has enabled identification of the hidden biodiversity in environmental samples. In this study, we utilized environmental polymerase chain reaction (PCR) and constructed the 18S nuclear ribosomal RNA clone library from environmental water samples in order to develop more efficient methods for species identification. For the molecular analysis, water samples were collected from the Seonakdong River (Gimhae Bridge) and the coast of Namhae，(Namhaedo). Colony PCR and restriction fragment length polymorphism of PCR (PCR-RFLP) were then adopted to isolate unique clones from the 18S rDNA clone library. Restriction fragment length polymorphism pattern analysis of the Gimhae Bridge sample revealed 44 unique clones from a total of 60 randomly selected clones, while analysis of the Namhae sample revealed 27 unique clones from 150 clones selected at random. A BLAST search and subsequent phylogenetic analysis conducted using the sequences of these clones revealed hidden biodiversity containing a wide range of taxonomic groups (Heterokontophyta (7), Ciliophora (23), Dinophyta (1), Chytridiomycota (1), Rotifera (1) and Arthropoda (11) in the Gimhae Bridge samples Ciliophora (4), Dinophyta (3), Cryptophyta (1), Arthropoda (19) in the Namhae samples). Therefore, the molecular monitoring method developed here can provide additional information regarding the biodiversity and community structure of eukaryotic plankton in environmental samples and helps construct a useful database of biodiversity for aquatic ecosystems.