• Tunnel and Underground Space
• /
• v.5 no.3
• /
• pp.240-250
• /
• 1995

Microcrack development in the macheon gabbro, the Sangju sandstone and the Jungsun marble due to fatigue stresses was investigated using differential strain analysis and microscopic observations from fluorescent-dyed thin sections. In the Macheon gabbro, various types of cracks, including gran boundary cracks, cleavage cracks, intragranular cracks adn intergranular cracks were developed. However, only grain boundary cracks were produced in the Sangju sandstone and the Jungsun marble due to fatigue stress. Many microcracks were produced due to fatigue stresses in the macheon gabbro. However, few microcracks were produced in the Sangju sandstone and the Jungsun marble. Fatigue stresses produced new microcracks in the Junngsun marble and the Macheon gabbro, but only pre-existing grain boundary cracks were lengthened in the Sangju snadstone. Most microcracks were produced within a few tens of numbers of cyclic loading, indicating that rocks under fatigue stresses will be damaged at the early stage of cyclic loading.

• Advances in concrete construction
• /
• v.5 no.4
• /
• pp.331-343
• /
• 2017

In this study a polymer concrete, made up of natural aggregates and an orthophthalic polyester binder, reinforced with natural Alfa fibers has been studied. The results of flexural testing of unreinforced polymer concrete with different rates of charges (marble) showed that the concrete with 20% of marble is stronger and more rigid compared to other grades. Hence, a rate of 20% of marble powder is selected as the optimal value in the development of polymer concrete reinforced Alfa fibers. The fracture results of reinforced polymer concrete with 1 and 2 wt% of chopped untreated or treated Alfa fibers showed that treated Alfa (5% NaOH) fiber reinforced polymer concrete has higher fracture properties than other composites. We believe that this type of concrete provides a very promising alternative for the building industry seeking to achieve the objectives of sustainable development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.76-77
• /
• 2013

The paper study on the mechanical properties of self-compacting concrete with waste marble powder. A change in the replacement ratio s of waste marble powder was measured compressive strength and slump flow, U-Box. As a results, Slump flow and U-box using waste marble powder tend to increase slump flow and compacting with replacement ratio. As the concrete with a replacement ratio of copper slag up to 10% was found to have a compressive strength superior to that of plain.

• Structural Engineering and Mechanics
• /
• v.53 no.6
• /
• pp.1241-1251
• /
• 2015

Faced with the growing needs of material resources and requirements of environmental protection for achieving sustainable development, it has become necessary to study and investigate all possibilities of exploring crushed and dune sand, reusing industrial wastes and by-product, and also applying new technologies including sand concrete which can replace the conventional concretes in certain structures to surmount the deficit on construction materials, conserve natural resources, lessen the burden of pollutants to protect the environment and reduce the consumption of energy sources. This experimental study is a part of development and valorization of local materials project in Skikda region (East of Algeria). It aims at studying the effects of partial replacement of sand with marble waste as fines on several fresh and hardened properties of sand concrete in order to reuse these wastes in the concrete manufacturing, resolve the environmental problems caused by them and find another source of construction materials. To achieve these objectives, an experimental program has been carried out; it was consisted to incorporate different percentages of marble waste fines (2, 4, 6, 8, 10 and 12%) in the formulations of sand concrete and study the development of several mechanical and rheological properties. We are also trying to find the optimal percentage of marble waste fine replaced in sand concrete that makes the strength of the concrete maximum. Obtained results showed that marble waste fines improve the properties of sand concrete and can be used as an additive material in sand concrete formulation.

• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.491-498
• /
• 2014

During the past years, the protection of the environment has become a major concern out passing the state frontiers to reach a planetary dimension. Depository waste sites have become a serious problem in terms of their locations and costs. On the other hand, the construction industry has a leading place in terms of quantities of waste produced from the start to the end of each construction site, by the large amounts of raw materials used and their respective consequences on the environment. The recycling of quarry wastes products, of demolished concrete, bricks and large quantities of waste resulting from the transformation of marble blocks can provide ideal solutions and advantages for the preservation of the environment, to become a supplementary source of aggregates. The main purpose of this study is to show technically the possibility of recuperating the aggregates of marble wastes as a partial substitute or total in the mortars. The aggregates used in this study is a sand of marble wastes (excess loads of sand exposed to bad weather conditions) of the quarry derived from Fil-fila marble (Skikda, east of Algeria). To achieve this work, we have studied the effect of sand substitution of marble wastes in the mortar with rates of (25, 50, 75, 100%); comparing the results obtained with reference samples (0%), the properties when the samples are fresh, and the mechanical performances of mortars at solid state (loss and gain of weight, dimensional variations). The introduction of recycled sand in the mortars gives good results and can be used as granulates.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.273-283
• /
• 2013

The artificial rain (pH 4.0, pH 5.6 and pH 6.85) and weathering simulation test are applied in dolomitic marble for the prediction of deterioration of the stone monuments constructed with carbonate rock by acid rain. pH of the applied rain all increase to about neutral pH after reaction of marble. The contents of $Ca^{2+}$ and $Mg^{2+}$ have increased more than twofold in two acid rain and deionized neutral rain after reaction of marble. The weight of marble is expected to decrease $0.00037kg/m^2$ each test cycle by pH 4.0 rain. This weight reduction rate of marble is 1.4 and 3.1 times more in pH 5.6 and pH 6.85 rain respectively, and 3.7 times more in only artificial weathering test. The compressive strength of marble is expected to decrease 0.2468, 0.1791 and $0.1280kg/m^2$ per test cycle with pH 4.0, pH 5.6 and pH 6.85 rain, respectively. These results mean that more acidic rain more enfeeble the strength of marble. Dolomite and small amount of calcite are precipitated in the rains after reaction of marble.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1700-1707
• /
• 2004

Nowaday, market size of digital image in world around is looks to rapidly growth. For this, Texture mapping has traditionally been used to add realism to computer graphics images. Therefore to make our image realistic, we need to give the various kind of objects material parameter and environment lighting. To present the completed marble we use passing back algorithm and combination with channel of a material. In experimental result of this paper that application by passing back algorithm and varying the parameter such as scale, period, distortion, octaves of noise make showing the superiority of optimized rendering of spheres and perfect another marble effects.

• Geomechanics and Engineering
• /
• v.34 no.4
• /
• pp.425-435
• /
• 2023

Granite and marble are widely produced and utilized in the construction industry, resulting in significant waste production. It is essential to manage this waste appropriately and repurpose it in recycling processes to ensure sustainability. The utilization of waste materials such as marble and granite waste (MGW) has become increasingly important in geotechnical engineering to improve the physical and mechanical properties of weak soils. This study investigated the applicability of utilizing MGW and cement (C)-MGW mixtures to improve clayey soil. A series of model plate loading tests were carried out in a specialized circular test tank to assess the influence of MGW and C-MGW mixing ratios on clayey soil samples. The samples were prepared by blending MGW and C-MGW in predetermined proportions. It is found that the bearing capacity of clay soil increased by approximately 71% when using MGW and C additives. Moreover, the consolidated settlement values of the clay soil decreased up to 6 times compared to the additive-free case.

• Journal of the Korean Chemical Society
• /
• v.62 no.6
• /
• pp.433-440
• /
• 2018

The pyrolysis has been universally applied to recycle the waste artificial marble. However, the existing heat treatment equipment has relatively low heat transfer efficiency into the inner part of the waste artificial marble. Besides, it leads to unnecessary excessive gas during the partial carbonization of the polymethyl methacrylate (PMMA) and raises the risk of fire due to heat at an extremely high temperature. This study suggests the process of pyrolysis at the formation state after adding the starch to waste artificial marble to overcome above-mentioned problems. As the result of experiments, this method showed that the pyrolysis of waste artificial marble was greatly improved at comparatively low temperature condition of $350^{\circ}C$. Moreover, it also manifested the effect on securing the stability and energy savings necessary for the recovery of methyl methacrylate (MMA) and ${\alpha}$-alumina (${\alpha}-Al_2O_3$).

• Journal of Conservation Science
• /
• v.7 no.1
• /
• pp.19-22
• /
• 1998

The influence of acid rain on the marble cultural properties investigated in two ways : 1) marble samples similar to that of Wongak-sa 10-story pagoda were directly exposed to rain in air at Chongro and Kwanghwamun sites; 2) marble samples under a protective facility were indirectly exposed to rain. The quantity of corrosion products and variations of calcium ion to rain were analyzed. The result shows that the corrosion qantity of the marble samples exposed directly under 1~8 mm rainfall in the Chongno and Kwanghwamun sites were similar, but those were 7.7 times higher than those indoor. Concentration of anions were higher than that of cations among the ion concentration over 40% in the early 1 mm rainfall. Calcium ion was produced over 30%. Because the monuments of marble, limestone and sandstone were affected by acid rain, it may be necessary to establish policies for the conservation on the National Treasures made of these materials.