• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.225-233
• /
• 2004

본 논문에서는 기존에 PC 모니터와 프린터 사이의 색 재현성 향상을 위해서 사용되던 색역폭 매핑 방법을 디스플레이 장치에 적용하기 위한 실시간 색역폭 매핑 방법을 제시하였다. 다양한 디스플레이 장치가 개발됨에 따라서 각 디스플레이 별로 색 재현성의 차이가 발생하고 있으며 기존의 색역폭 매핑 방법을 디지털 TV의 디스플레이 장치에 적용하기 위해서는 수 나노초 단위의 처리 속도가 필요하다. 이를 위하여 본 논문에서는 절감 3차원 룩업 테이블(three-dimensional reduced resolution look-up table)의 하드웨어 구조를 제안하고 이를 이용하여 색역폭 매핑을 실시간으로 수행하는 방법을 제공한다. 제안된 하드웨어 구조는 먼저 simulation을 통하여 타당성을 검증하였으며 이후 FPGA와 ASIC으로 구현되어 디지털 TV의 디스플레이 장치의 화질 개선에 성공적으로 적용되었다.

• 대한원격탐사학회지
• /
• 제5권2호
• /
• pp.109-122
• /
• 1989

The ISODATA method, which is one of the most famous of the square-error clustering methos, has been applied to two Chungju multivariate data sets in order to evaluate the effectiveness of the regional lithological mapping. One is an airborne radiometric data set and the other is a mixed data set of the airborne radiometric and Landsat TM data. In both cases, the classification of the Bulguksa granite and the Kyemyongsan biotite-quartz gneiss are the most successful. Hyangsanni dolomitic limestone and neighboring Daehyangsan quartzite are also classified by their typical lowness of the radioactive intensities, though it is still confused with some others such as water-covered areas and nearby alluvials, and unaltered limestone areas. Topographically rugged valleys are also classified as the same cluster as above. This could be due to unavoidable variations of flight height and the attitude of the airborne system in such rugged terrains. The regional geological mapping of sedimentary rock units of the Ockchun System is in general confused. This might be due to similarities between different sediments. Considarable discrepancies occurred in mapping some lithological boundaries might also be due to secondary effects such as contamination or smoothing in digitizing process. Further study should be continued in the variable selection scheme as no absolutely superior method claims to exist yet since it seems somewhat to be rather data dependent. Study could also be made on the data preprocessing in order to reduce the erratic effects as mentioned above, and thus hoprfully draw much better result in regional geological mapping.

• ETRI Journal
• /
• 제41권3호
• /
• pp.308-315
• /
• 2019

Due to its high spectrum efficiency, 64-amplitude phase-shift keying (64-APSK) is one of the primary technologies used in deep space communications and digital video broadcasting through satellite-second generation. However, 64-APSK suffers from considerable computational complexity because of the de-mapping method that it employs. In this study, a low-complexity de-mapping method for (4 + 12 + 20 + 28) 64-APSK is proposed in which we take full advantage of the symmetric characteristics of each symbol mapping. Moreover, we map the detected symbol to the first quadrant and then divide the region in this first quadrant into several partitions to simplify the formula. Theoretical analysis shows that the proposed method requires no operation of exponents and logarithms and involves only multiplication, addition, subtraction, and judgment. Simulation results validate that the time consumption is dramatically decreased with limited degradation of bit error rate performance.

• 한국컴퓨터정보학회논문지
• /
• 제26권2호
• /
• pp.11-18
• /
• 2021

SSD의 FTL에서는 호스트로부터 요청된 논리적 페이지 번호를 실제 기록된 플래시 메모리 페이지 번호로 매핑하는 작업을 한다. 매핑 정보를 관리하기 위해서 사용되는 RAM의 용량을 줄이는 것은 매우 중요하다. 기존의 요구기반 FTL에서는 매핑 정보도 플래시 메모리 페이지에 기록하고 그들의 주소만 RAM에 테이블로 관리하는 2단계 방법을 적용하였다. 그러나 SSD의 용량이 수십 테라바이트 수준으로 늘어나고 있으므로 이 방법만으로는 충분하지 않다. 본 논문에서는 소요되는 RAM의 용량을 획기적으로 줄이기 위해서 매핑 정보를 3단계로 관리하는 방법인 ML-FTL을 제안하고 그 성능을 평가하였다. 캐시를 적절히 활용함으로써 기존의 2단계 방법에 비해서 오버헤드가 늘어나는 정도가 미미하다는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.162-172
• /
• 1995

In this paper new mesh generation method is proposed for crack propagation analysis based on the finite element method. The main tool of the method is the Delaunay Triangulation, Transfinete element mapping, and it allows the setting of the arbitrary crack-growth increment and the arbitrary crack direction. It has the form of a subroutine, and it is easily introduced as a subroutine for any mesh generation method which is based on the blocking method.

• 한국해양공학회지
• /
• 제33권1호
• /
• pp.17-25
• /
• 2019

A numerical method is suggested for evaluating the singular integral of curved panels in the higher-order boundary element method. Two-step mapping procedures that are significantly related to the physical properties of singular behaviors were developed and illustrated. As a result, the singular behaviors were significantly alleviated, and the efficiency and robustness of the present method for tangentially and axially deformed elements were proven. However, inaccuracies and numerical instabilities of twisted elements were discovered as a result of nonlinearities.

• 대한원격탐사학회지
• /
• 제35권5_2호
• /
• pp.873-881
• /
• 2019

재난관리에서 담당 공무원(관리자)이 모든 피해 현장을 조사하고 복구 계획을 수립하기에는 인력과 비용 측면에서 한계점이 있다. 이를 극복하기 위해 다수의 지역민이 참여하는 커뮤니티매핑(community mapping) 과정에서 등록되는 현장 정보들을 통하여 효율적인 재난관리 의사결정에 활용할 수 있다. 하지만 여러 피해지역에서 검증되지 않은 다수의 정보가 등록되면 오히려 복구 우선순위 결정 등에 걸림돌이 되기도 한다. 또한 커뮤니티매핑 정보는 사용자가 업로드한 사진이나 사전 분류된 내용 또는 콘텐츠만 업로드할 수 있어 관리자가 현장 상황을 명확히 파악하기 어려운 문제점이 있으므로 이를 개선할 여지가 있다. 따라서 본 연구에서는 커뮤니티매핑에 등록되는 정보와 드론으로 촬영한 3D매핑 정보를 연계하여 재난관리 의사결정을 지원하기 위한 방안을 제시하였다. 이를 통하여 관리자가 피해 상황을 종합적으로 판단할 수 있어 피해복구에 대한 계획수립 시 최종 결정권자의 의사결정을 지원할 수 있을 뿐만 아니라 피해복구 단계에서 시간, 인력, 비용의 절감이 가능할 것으로 기대한다.

• 한국측량학회지
• /
• 제35권4호
• /
• pp.319-326
• /
• 2017

SAR (Synthetic aperture radar) images are less affected by the weather compared to optical images and can be obtained at any time of the day. Therefore, SAR images are being actively utilized for military applications and natural disasters. However, because SAR data are in grayscale, it is difficult to perform visual analysis and to decipher details. In this study, we propose a color mapping method using RF (random forest) regression for enhancing the visual decipherability of SAR images. COSMO-SkyMed 2 and WorldView-3 images were obtained for the same area and RF regression was used to establish color configurations for performing color mapping. The results were compared with image fusion, a traditional color mapping method. The UIQI (universal image quality index), the SSIM (structural similarity) index, and CC (correlation coefficients) were used to evaluate the image quality. The color-mapped image based on the RF regression had a significantly higher quality than the images derived from the other methods. From the experimental result, the use of color mapping based on the RF regression for SAR images was confirmed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권12호
• /
• pp.1702-1705
• /
• 2006

A simulation study was conducted to evaluate a fine-mapping method exploiting population-wide linkage disequilibrium. Data were simulated according to the pedigree structure based on a large paternal half-sib family population with a total of 1,034 or 2,068 progeny. Twenty autosomes of 100 cM were generated with 5 cM or 1 cM marker intervals for all founder individuals in the pedigree, and marker alleles and a number of quantitative trait loci (QTL) explaining a total of 70% phenotypic variance were generated and randomly assigned across the whole chromosomes, assuming linkage equilibrium between the markers. The founder chromosomes were then descended through the pedigree to the current offspring generation, including recombinants that were generated by recombination between adjacent markers. Power to detect QTL was high for the QTL with at least moderate size, which was more pronounced with larger sample size and denser marker map. However, sample size contributed much more significantly to power to detect QTL than map density to the precise estimate of QTL position. No QTL was detected on the test chromosomes in which QTL was not assigned, which did not allow detection of false positive QTL. For the multiple QTL that were closely located, the estimates of the QTL positions were biased, except when the QTL were located on the right marker positions. Our fine mapping simulation results indicate that construction of dense maps and large sample size is needed to increase power to detect QTL and mapping precision for QTL position.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.37-45
• /
• 2011

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) or FlexRay are essential for convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on the communication between heterogeneous networks such as body networking and chassis networking systems. A gateway based on message mapping method was developed to interconnect FlexRay and CAN networks. However, this type of gateways has the following shortcomings. First, when a message ID was changed, the gateway must be reloaded with a new mapping table reflecting the change. Second, if the number of messages to be transferred between two networks increase, software complexity of gateway increases very rapidly. In order to overcome these disadvantages, this paper presents FlexRay-CAN gateway based on node mapping method. More specifically, this paper presents a node mapping based FlexRay-CAN gateway operation algorithm along with the experimental evaluation for ID change.