• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.225-233
• /
• 2004

A novel real-time color gamut mapping method is described. The color gamut mapping method that is used for enhancing the color reproduction quality between PC monitor and printer devices is adopted for digital TV display quality enhancement. The high definition digital TV display devices operate at the clock speed of around 70MHz ～ 150MHz and permit several nano seconds for real-time gamut mapping. Thus, the concept of three-dimensional reduced resolution look-up table is introduced for real-time processing. The required hardware can be greatly reduced by look-up table resolution adjustment. The proposed hardware architecture is successfully implemented in FPGA and ASIC and also successfully adopted in digital TV display quality enhancement purposes.

• Korean Journal of Remote Sensing
• /
• v.5 no.2
• /
• pp.109-122
• /
• 1989

The ISODATA method, which is one of the most famous of the square-error clustering methos, has been applied to two Chungju multivariate data sets in order to evaluate the effectiveness of the regional lithological mapping. One is an airborne radiometric data set and the other is a mixed data set of the airborne radiometric and Landsat TM data. In both cases, the classification of the Bulguksa granite and the Kyemyongsan biotite-quartz gneiss are the most successful. Hyangsanni dolomitic limestone and neighboring Daehyangsan quartzite are also classified by their typical lowness of the radioactive intensities, though it is still confused with some others such as water-covered areas and nearby alluvials, and unaltered limestone areas. Topographically rugged valleys are also classified as the same cluster as above. This could be due to unavoidable variations of flight height and the attitude of the airborne system in such rugged terrains. The regional geological mapping of sedimentary rock units of the Ockchun System is in general confused. This might be due to similarities between different sediments. Considarable discrepancies occurred in mapping some lithological boundaries might also be due to secondary effects such as contamination or smoothing in digitizing process. Further study should be continued in the variable selection scheme as no absolutely superior method claims to exist yet since it seems somewhat to be rather data dependent. Study could also be made on the data preprocessing in order to reduce the erratic effects as mentioned above, and thus hoprfully draw much better result in regional geological mapping.

• ETRI Journal
• /
• v.41 no.3
• /
• pp.308-315
• /
• 2019

Due to its high spectrum efficiency, 64-amplitude phase-shift keying (64-APSK) is one of the primary technologies used in deep space communications and digital video broadcasting through satellite-second generation. However, 64-APSK suffers from considerable computational complexity because of the de-mapping method that it employs. In this study, a low-complexity de-mapping method for (4 + 12 + 20 + 28) 64-APSK is proposed in which we take full advantage of the symmetric characteristics of each symbol mapping. Moreover, we map the detected symbol to the first quadrant and then divide the region in this first quadrant into several partitions to simplify the formula. Theoretical analysis shows that the proposed method requires no operation of exponents and logarithms and involves only multiplication, addition, subtraction, and judgment. Simulation results validate that the time consumption is dramatically decreased with limited degradation of bit error rate performance.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.2
• /
• pp.11-18
• /
• 2021

The flash translation layer(FTL) of SSD maps the logical page number requested from the host to the actual recorded flash memory page number. It is very important to reduce the amount of RAM used to manage the mapping information. In the existing demand-based FTLs, two-level method is applied in which mapping information is also recorded in flash memory pages and only their addresses are managed as a table in RAM. As the capacities of SSDs are growing to tens of terabytes, the amount of RAM for mapping table becomes too large. In this paper, ML-FTL was proposed as a method of managing mapping information in three levels to reduce the amount of RAM required drastically. From an evaluation, the increase in overhead was minimal compared to the conventional two-level method by properly utilizing cache.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.162-172
• /
• 1995

In this paper new mesh generation method is proposed for crack propagation analysis based on the finite element method. The main tool of the method is the Delaunay Triangulation, Transfinete element mapping, and it allows the setting of the arbitrary crack-growth increment and the arbitrary crack direction. It has the form of a subroutine, and it is easily introduced as a subroutine for any mesh generation method which is based on the blocking method.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.17-25
• /
• 2019

A numerical method is suggested for evaluating the singular integral of curved panels in the higher-order boundary element method. Two-step mapping procedures that are significantly related to the physical properties of singular behaviors were developed and illustrated. As a result, the singular behaviors were significantly alleviated, and the efficiency and robustness of the present method for tangentially and axially deformed elements were proven. However, inaccuracies and numerical instabilities of twisted elements were discovered as a result of nonlinearities.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.873-881
• /
• 2019

There are limitations to the manager's investigation of all damage sites and establishment of management plan in terms of manpower and cost. Community mapping can be used to overcome these problems with the information. However, it is difficult to make decisions when multiple information are registered in multiple areas of damage. Because community mapping information are registered only with pictures and simple contents, it is so difficult for the manager to clearly understand the site situation. This study suggests a methodology to support decision-making processes during disaster management through system integration between the community mapping and the drone mapping. By applying the proposed method, decision makers can make a timely judgment effectively on the damage situation. It is expected that the proposed method will save time, manpower, and cost in the recovery phase.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.4
• /
• pp.319-326
• /
• 2017

SAR (Synthetic aperture radar) images are less affected by the weather compared to optical images and can be obtained at any time of the day. Therefore, SAR images are being actively utilized for military applications and natural disasters. However, because SAR data are in grayscale, it is difficult to perform visual analysis and to decipher details. In this study, we propose a color mapping method using RF (random forest) regression for enhancing the visual decipherability of SAR images. COSMO-SkyMed 2 and WorldView-3 images were obtained for the same area and RF regression was used to establish color configurations for performing color mapping. The results were compared with image fusion, a traditional color mapping method. The UIQI (universal image quality index), the SSIM (structural similarity) index, and CC (correlation coefficients) were used to evaluate the image quality. The color-mapped image based on the RF regression had a significantly higher quality than the images derived from the other methods. From the experimental result, the use of color mapping based on the RF regression for SAR images was confirmed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1702-1705
• /
• 2006

A simulation study was conducted to evaluate a fine-mapping method exploiting population-wide linkage disequilibrium. Data were simulated according to the pedigree structure based on a large paternal half-sib family population with a total of 1,034 or 2,068 progeny. Twenty autosomes of 100 cM were generated with 5 cM or 1 cM marker intervals for all founder individuals in the pedigree, and marker alleles and a number of quantitative trait loci (QTL) explaining a total of 70% phenotypic variance were generated and randomly assigned across the whole chromosomes, assuming linkage equilibrium between the markers. The founder chromosomes were then descended through the pedigree to the current offspring generation, including recombinants that were generated by recombination between adjacent markers. Power to detect QTL was high for the QTL with at least moderate size, which was more pronounced with larger sample size and denser marker map. However, sample size contributed much more significantly to power to detect QTL than map density to the precise estimate of QTL position. No QTL was detected on the test chromosomes in which QTL was not assigned, which did not allow detection of false positive QTL. For the multiple QTL that were closely located, the estimates of the QTL positions were biased, except when the QTL were located on the right marker positions. Our fine mapping simulation results indicate that construction of dense maps and large sample size is needed to increase power to detect QTL and mapping precision for QTL position.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.37-45
• /
• 2011

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) or FlexRay are essential for convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on the communication between heterogeneous networks such as body networking and chassis networking systems. A gateway based on message mapping method was developed to interconnect FlexRay and CAN networks. However, this type of gateways has the following shortcomings. First, when a message ID was changed, the gateway must be reloaded with a new mapping table reflecting the change. Second, if the number of messages to be transferred between two networks increase, software complexity of gateway increases very rapidly. In order to overcome these disadvantages, this paper presents FlexRay-CAN gateway based on node mapping method. More specifically, this paper presents a node mapping based FlexRay-CAN gateway operation algorithm along with the experimental evaluation for ID change.