• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.4
• /
• pp.295-300
• /
• 2013

The noise map can be applied to predict the effect of noise and establish the noise reduction measure. But the predicted value in the noise map can vary depending on the input variables. Thus, we surveyed the several prediction models and analyzed the changes corresponding to the variables for obtaining the coherency and accuracy of prediction results. As a result, we know that the Schall03 and CRN model can be applied to predict the railway noise in Korea and the correction value, such as bridges correction, multiple reflection correction, curve correction must be used for reflecting the condition of the prediction site. Also, we know that the prediction guideline is an essential prerequisite in order to obtain the unified and accurate predicted value for railway noise.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.207-215
• /
• 2015

Safety' can be used in a variety of ways and may also have different meanings when used in theoretical field and routinely used. In this paper, the 'safety' means that human injury, fire or physical accident condition does not occur while used by the end-user. The meaning of safety may be different by era and culture. Even in contemporary era, the meaning can be used differently by country, region and culture. As the rights of consumers are increasingly reinforced, we can expect the acceptable risk or safety level can rise higher. In this paper, the R-map of Japan and the European risk assessment guidelines (RAPEX) were reviewed considering domestic incidents database status and its applicability. Because it is difficult to make a model based on a R-map, a revised model was developed mainly based on European Assessment Model with a combination of the important characteristics of Japan model R-map. Also utilizing this revised model, the availability as a new risk assessment model was confirmed by comparing the test results for the same scenarios to the other risk assessment model (RAPEX/RAG).

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.9-13
• /
• 2014

The performance of large scale software applications has been automatically increasing for last few decades under the influence of Moore's law - the number of transistors on a microprocessor roughly doubled every eighteen months. However, on-chip transistors limitations and heating issues led to the emergence of multicore processors. The energy efficient ARM based System-on-Chip (SoC) processors are being considered for future high performance computing systems. In this paper, we present a case study of two widely used parallel programming models i.e. MPI and MapReduce on distributed memory cluster of ARM SoC development boards. The case study application, Black-Scholes option pricing equation, was parallelized and evaluated in terms of power consumption and throughput. The results show that the Hadoop implementation has low instantaneous power consumption that of MPI, but MPI outperforms Hadoop implementation by a factor of 1.46 in terms of total power consumption to execution time ratio.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.1-23
• /
• 2014

Market forecasting aims to estimate the sales volume of a product or service that is sold to consumers for a specific selling period. From the perspective of the enterprise, accurate market forecasting assists in determining the timing of new product introduction, product design, and establishing production plans and marketing strategies that enable a more efficient decision-making process. Moreover, accurate market forecasting enables governments to efficiently establish a national budget organization. This study aims to generate a market growth curve for ICT (information and communication technology) goods using past time series data; categorize products showing similar growth patterns; understand markets in the industry; and forecast the future outlook of such products. This study suggests the useful and meaningful process (or methodology) to identify the market growth pattern with quantitative growth model and data mining algorithm. The study employs the following methodology. At the first stage, past time series data are collected based on the target products or services of categorized industry. The data, such as the volume of sales and domestic consumption for a specific product or service, are collected from the relevant government ministry, the National Statistical Office, and other relevant government organizations. For collected data that may not be analyzed due to the lack of past data and the alteration of code names, data pre-processing work should be performed. At the second stage of this process, an optimal model for market forecasting should be selected. This model can be varied on the basis of the characteristics of each categorized industry. As this study is focused on the ICT industry, which has more frequent new technology appearances resulting in changes of the market structure, Logistic model, Gompertz model, and Bass model are selected. A hybrid model that combines different models can also be considered. The hybrid model considered for use in this study analyzes the size of the market potential through the Logistic and Gompertz models, and then the figures are used for the Bass model. The third stage of this process is to evaluate which model most accurately explains the data. In order to do this, the parameter should be estimated on the basis of the collected past time series data to generate the models' predictive value and calculate the root-mean squared error (RMSE). The model that shows the lowest average RMSE value for every product type is considered as the best model. At the fourth stage of this process, based on the estimated parameter value generated by the best model, a market growth pattern map is constructed with self-organizing map algorithm. A self-organizing map is learning with market pattern parameters for all products or services as input data, and the products or services are organized into an $N{\times}N$ map. The number of clusters increase from 2 to M, depending on the characteristics of the nodes on the map. The clusters are divided into zones, and the clusters with the ability to provide the most meaningful explanation are selected. Based on the final selection of clusters, the boundaries between the nodes are selected and, ultimately, the market growth pattern map is completed. The last step is to determine the final characteristics of the clusters as well as the market growth curve. The average of the market growth pattern parameters in the clusters is taken to be a representative figure. Using this figure, a growth curve is drawn for each cluster, and their characteristics are analyzed. Also, taking into consideration the product types in each cluster, their characteristics can be qualitatively generated. We expect that the process and system that this paper suggests can be used as a tool for forecasting demand in the ICT and other industries.

• Spatial Information Research
• /
• v.5 no.2
• /
• pp.147-160
• /
• 1997

"The "Map Algebra", beeing recognized as a viable theoretical framework for GIS (Geographica Infonnation System), models map layers as "operands" which are the basic unit of geo-processing, and a variety of GIS commands as "operators." In this paper, we attempt at lifting some limitations of map algebras proposed in GIS literature. First, we model map layer as "function" such that we may employ the notion of meta operator (or, higher-order funtion) available in the functional programming paradigm. This approach provides map algebraic language with "programmability" needed in GIS user language. Second, we extend the semantics of, and improve on the sytactic structure of map algebraic language. Mer the data model and language associated with map algebra are formalized, we proceed to design and implement a prototype of map algebraic processor. The parser of the language in our prototype plays the role of transforming the native and heterogeneous user language of current GISs into a canonical map algebraic language. The prototype, named "MapSee" is a proof-of-concept system for the ideas we propsed in this paper. We believe that the uniform interface based on the map algebraic language will make promising infrastructure to support "Internet GIS." This is because the uniform but powerful interface through the Web clients allow access to both geo-data and geo-processing resources distributed over the network.to both geo-data and geo-processing resources distributed over the network.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.55-61
• /
• 2017

The V-world, korean type spatial information open platform, provides various services to easily utilize 2D, 3D map and administrative information of the country. Among them, V-world 3D map service, modeled in individual building unit, require requests for each building model file and the draw calls for drawing models on the screen by the request. This causes a large number of model requests and draw calls to occur that increase the latency occurring during the transmission and conversion process between the central processing unit(CPU) and the graphic processing unit(GPU), which lead to the performance degradation of the 3D map service. In this paper, we propose a performance improvement plan to reduce the performance degradation of 3D map service caused by multiple model requests and draw calls. Therefore, we tried to reduce the number of requests and draw calls for the model file by applying a 3D tile model that combined multiple building models to single tile. In addition, we applied the quadtree algorithm to reduce the time required to load the model file by shortening the retrieval time of the model. This is expected to contribute to improving the performance of 3D map service of V-world.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.691-702
• /
• 2019

Flood inundation map has various important roles in terms of municipal planning, timely dam operation, economic levee design, and building flood forecasting systems. Considering that the riparian areas adjacent to national rivers with high potential flood vulnerability conventionally imposed special cares to justify applications of recently available two- or three-dimensional flood inundation numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. On the contrary, local streams usually could not have benefits from recent technological advances, instead they inevitably have relied upon time-consuming manual drawings or have accepted DEMs with poor resolutions or inaccurate 1D numerical models for producing inundation maps due mainly to limited budgets and suitable techniques. In order to efficiently and cost-effectively provide a series of flood inundation maps dedicatedly for the local streams, this study proposed an OpenGIS-based flood mapping tool named Open Flood Mapper (OFM). The spatial accuracy of flood inundation map derived from the OFM was validated throughout comparison with an inundation trace map acquired after typhoon Nari in Hancheon basin located in Jeju Island. Also, a series of inundation maps from the OFM were comprehensively investigated to track the burst of flood in the extreme flood events.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.88-94
• /
• 2004

Recently, vehicle simulators are widely used to evaluate driver's responses and driver assistance systems. It needs much effort to construct the virtual driving environment for a vehicle simulator. In this study, it is described how to make effectively the roads and the driving environment for a vehicle simulator. The GIS (Geographic Information System) is used to construct the roads and the environment effectively. Because the GIS is the integrated system of geographical data, it contains useful data to make virtual driving environment. First, the outline and centerline of roads is abstracted from the GIS. From the road outline, the road width is calculated. Using the centerline, the grid model of roads is constructed. The final graphic model of roads is constructed by mapping road image to the grid model according to the number of lanes and the kind of surface. Data of buildings from the GIS are abstracted. Each shape and height of buildings is determined according to kind of buildings, the final graphic model of buildings is constructed. Then, the graphic model of roadside tree is also constructed. Finally, the driving environment for driving simulator is constructed by converting the three graphic models with the graphic format of Direct-X and by joining the three graphic models.

• Water for future
• /
• v.28 no.6
• /
• pp.119-131
• /
• 1995

Two-dimensional diffusion and kinematic hydrodynamic models have been studied for preparing the flood inundation map. The models have been tested by applying to one-dimensional dam-break problem. The results have good agreements compared with those of dynamic wave model. The diffusion wave model produces the mass conservation error close to zero. Floodwave analyses for two-dimensional floodplain with obstruction and channel-floodplain show both stable and efficient results. The model presented in this study can be used for flood inundation map and flood warning system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.457-462
• /
• 2011

The purpose of this study was to detect QTL for carcass quality on bovine chromosome (BTA) 6 using a high density SNP map in a Hanwoo population. The data set comprised 45 sires and their 427 Hanwoo steers that were born between spring of 2005 and fall of 2007. The steers that were used for progeny testing in the Hanwoo Improvement Center in Seosan, Korea, were genotyped with the 2,535SNPs on BTA6 that were embedded in the Illumina bovine SNP 50K chip. Four different linkage disequilibrium (LD) mapping models were applied to detect significant SNPs for carcass quality traits; the fixed model with a single marker, the random model with a single marker, the random model with haplotype effects using two adjacent markers, and the random model at hidden state. A total of twelve QTL were detected, for which four, one, three and four SNPs were detected on BTA6 under the respective models (p<0.001). Among the detected QTL, four, two, five and one QTL were associated with carcass weight, backfat thickness, longissimus dorsi muscle area, and marbling score, respectively (p<0.001). Our results suggest that the use of multiple LD mapping approaches may be beneficial in increasing power to detect QTL given a limited sample size and magnitude of QTL effect.