• Design & Manufacturing
• /
• 제13권1호
• /
• pp.5-12
• /
• 2019

In this paper, we studied the micro tool deflection, micro cutting with low temperature, and deformation of micro ribs caused by cutting forces. First, we performed an integrated machining error compensation method based on captured images of tool deflection shapes in micro cutting process. In micro cutting process, micro tool deflection generates very serious problems in contrast to macro tool deflection. To get the real images of micro tool deflection, it is possible to estimate tool deflection in cutting conditions modeled and to compensate for machining errors using an iterative algorithm correcting tool path. Second, in macro cutting fields, the cryogenic cutting process has been applied to cut the refractory metal but, the serious problem may be generated in micro cutting fields by the cryogenic environment. However, if the proper low temperature is applied to micro cutting area, the cooling effect of cutting heat is expected. Such effect can make the reduction of tool wear and burr formation. For verifying this passibility, the micro cutting experiment at low temperature was performed and SEM images were analyzed. Third, the micro pattern was deformed by the cutting forces and the shape error occurred in the sidewall multi-step cutting process were minimized. As the results, the relationship between the cutting conditions and the deformation of micro-structure during micro cutting process was investigated.

• 열처리공학회지
• /
• 제36권5호
• /
• pp.270-276
• /
• 2023

In this study, we analyzed two types of cold forging dies commonly used for manufacturing general nuts and screws to investigate the differences in WC powder according to the lifespan. For both Type I and Type II dies, it was observed that as the lifespan of the molds increases, the area fraction of Co becomes larger and the size of the powder becomes smaller. Moreover, there is a trend where the strength also increases as the lifespan gets longer. Actually, the hardness value of the sample with the longest lifespan is ~ 131 HV higher than the specimen of the shortest lifespan, It is noted that the reduction in toughness of the WC-Co mold is caused by insufficient Co and the decrease in contact surface area of WC-Co results in a reduced bonding surface area. The lifespan of cold-working WC molds increases when the W content and the volume fraction of WC are high, and the size of the WC powder is small. The results can significantly enhance producing high-quality molds with an extended lifespan using WC powder for cold forging.

• 한국응용과학기술학회지
• /
• 제2권2호
• /
• pp.15-20
• /
• 1985

Influence of vitamins on the felt and lipid production of Aspergilus niger var. macrosporus, Aspergillus fumigatus and penicillium notatum were investigated after 10 days of incubation at $30^{\circ}C$ under static culture condition. The felt of molds were lower in the media containing vitamins than control medium. The lipids produced by each strains were highest yields in media containing vitamins. Among of these Aspergillus niger var. macrosporus and Aspergillus fumigatus produced. 4.6g and 5.28g in medium containing inositol 2.5mg/l and 0.5mg/l, respectively; while Penicillium notatum produced 1.51g in a medium containing thiamine 10mg/l. The major fatty acid of lipids were palmitic acid, stearic acid, oleic acid and linoleic acid. Aspergillus niger var. macrosporus was lower palmitic acid in media containing vitamins than control medium, While linoleic acid was higher in media containing thiamine and inositol. Aspergillus fumigatus was lower oleic acid in media containing vitamins than control medium, While linoleic acid was higher in media containing vitamins. Peniillium notatum was lower palmitic acid, oleic acid and stearic acid in media containing vitamins but linoleic acid was higher. The composition of fatty acid of lipids changed depending on the media containing vitamins but hardly found a certain tendency except linoleic acid which was higher in a media containing thiamines and inositols. The degree of unsaturation of fatty acids in the lipids were comparatively higher in media containing vitamins than control medium.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.142-151
• /
• 2013

This study develops an automation system for metallic mold design that is applicable in forging non-axial symmetric parts. The metallic mold design program is used to design the metallic mold using two-dimensional axial symmetric metallic molds and to predict the stress concentration using finite element analyses. Then, the program redesigns the metallic mold using variables such as the optimal split diameter, maximum allowable inner pressure, fit tolerance, and stress distribution, which are calculated using the metallic mold design program. When the involute spur gear is forged, stress concentration occurs on the tooth root bounded at the symmetric surface. The SCM4 material is suitable for metallic molds because the stress is less than the yield strength of the insert and it acts on the tooth root regardless of the inner pressure. The metallic mold for forging non-axial symmetric parts can be designed through adjusting the magnitude of the contact pressure. The program developed in this study can be applied to metallic mold designs in involute spur gears of forging, which is an ordinary non-axial symmetric part.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.3-9
• /
• 2006

HSM(High-speed Machining) is widely used in rapid manufacturing of precision products and molds of various materials. Improvement in cutting efficiency is one of the important subjects in the HSM process. To analyse the dynamic behavior during a very short cutting time, the computational analysis code, LS-DYNA3D, was employed for the simulation of the mechanism of HSM for aluminium 7075. This cutting mechanism includes some difficult points in simulation, for example, material and geometrical non-linearity, high-speed dynamic impact, contact with friction, etc. In this paper, a finite element model considering the strain rate effect is proposed to predict the cutting phenomena such as chip deformation, strain and stress distributions, which will help us to design the HSM process.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.127-132
• /
• 2014

Micro/nano-injection molding is one of the main processing techniques for polymer micro-fabrication. Most of the difficulties encountered in polymer micro-molding are caused by the demolding, rather than the filling of molds. Therefore, studying the demolding process is vitally important for manufacturing polymer replicas. The most important parameters are the thermal stress, friction and adhesion forces, and mechanical strength of the resist. In this research, we determinedthe effects of the processing conditions on the ejection force for cases involving two common thermoplastic polymers. The results showed that the processing conditions noticeably influenced the ejection force.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.7-12
• /
• 2012

In order to cope with the requirements of smaller patterns, larger surfaces and lower costs in the fields of displays, optics and energy, greater attentions are now being paid to the development of micro-pattern machining technology. Compared with flat moulds, large drums with micro patterns (roll moulds) have the advantages of short delivery, ease of manufacturing larger surfaces, and continuous moulding. This paper introduced the machining process technology of the roll moulds for display industry. The environmental effects were discussed and the importance of temperature maintenance was experimentally emphasized. The real time monitoring system for micro machining was introduced. A commercial solution was used to simulate the micro grooving and a deformation model of micro machined pattern was finally introduced.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.462-470
• /
• 2016

The locking load of a conventional manhole depends on the weight of its cover. Locking-type manhole structures with a special locking mechanism were recently developed to prevent accidents such as stolen cover, away cover from a frame. The weight of the manhole structure can be reduced under structural safety because the locking force of a locking-type manhole is greater than the weight of the cover. A light-weight manhole cover is developed in this study by using a finite element stress analysis and the design of experiments. Static stress analysis and fracture experiments are also conducted to analyze the states of the initial product. The optimum light-weight manhole cover considering manufacturing molds is developed and tested. Consequently, the weight was found to reduce by 16%. In addition, the fracture load increased by 38%.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.1-10
• /
• 2021

In this study, the current state of the plastics industry has been examined. The direction of development and innovation is reviewed and commented. The technical statuses of various sectors such as thermoplastic resin, composite material, mold engineering, and simulation have been scrutinized. In addition, the industrial status of each sector has been reviewed. Then, the challenges that the plastics manufacturing industry has to deal with have been discussed. Especially, the situation in Republic of Korea has been elaborated in detail. Based on the discussion, an open innovation strategy has been suggested. It has been argued in this work that the open innovation strategy will enables efficient funding and development by avoiding resource consuming rent seeking.

• 공업화학
• /
• 제24권3호
• /
• pp.239-246
• /
• 2013

기존의 발포유리 제조공정의 원리는 원료유리분말을 거푸집에 담아 발포소성시키며, 발포소성 후에 발포체를 거푸집과 분리 후에 서냉 열처리를 하는 것이다. 이러한 이유로 기존의 발포유리 제조공정은 연속생산이 불가능하다. 본 연구에서는, 발포유리의 연속생산공정을 개발하기 위해서 거푸집을 사용하지 않는 대신, 원료유리분말을 가압성형하여 먼저 성형체를 만들고, 이 성형체를 발포시켜 발포유리를 생산하는 새로운 발포유리제조공정의 가능성을 타진하였다. 수화된 소다석회 유리분말을 사용하고 유리의 발포에 가장 핵심적인 발포제를 달리한 가압성형체를 발포소성시키는 실험 결과를 통해서, 거푸집을 사용하지 않고서도 발포유리의 연속생산공정이 가능할 수 있음을 확인하였다.