• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.19-25
• /
• 1998

In this study, proper injection molding condition has been studied through stress relaxation tests in order to experimentally investigate the effect of the condition on softening of mold product, using specimens produced under the different conditions according to the recommendation of resin manufactures. As a result, softening of the specimens was found to be strongly influenced by material melting temperature. The specimen with higher material melting temperature is found to have lower softening. However, softening of the specimen with lower mold temperature has an decrement, compared with other specimens. In particular, specimen with notch is influenced by mold temperature. The softening increase with higher injection speed and pressure. Finally in order to improve softening, material melting temperature, injection speed and injection pressure were found to be increased with low mold temperature.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.3
• /
• pp.102-106
• /
• 2010

Recently process industries from oil and gas procedures and mining companies to manufactures of chemicals, foods, and beverages has been exploring the USN (Ubiquitous Sensor Networks) technology to improve safety of production processes. However, to apply the USN technology in the large-scale plant industry, reliability and security issues are not fully addressed yet, and the absence of the industrial sensor networking standard causes a compatibility problem with legacy equipment and systems. Although this situation, process industry such as energy plants are looking for the secure wireless plant solution to provide detailed, accurate safety monitoring from previously hard-reach, unaccordable area. In this paper, SPSF (Smart Plant Safety Framework based on Reliable-Secure USN) is suggested to fulfill the requirements of high-risk industrial environments for highly secure, reliable data collection and plant monitoring that is resistant to interference. The SPSF consists of three main layers: 1) Smart Safety Sensing Layer, 2) Smart Safety Network Layers, 3) Plant Network System Layer.

• Journal of the Korean Home Economics Association
• /
• v.37 no.1
• /
• pp.109-118
• /
• 1999

The effective construction for ready-made clothes is one of the central concerns of both consumers and manufactures in today's apparel industry. So in order to reduce the burden of stocks and increase clothing fitness, systematic information on typical body size and somatotypes is essential. This study was performed to provide fundamental data on junior high school girls' somatotype by classifying the lower body somatotype and analyzing the characteristics of each somatotype. The subject were 234 Korean Junior High School Girls. The subjects were directly measured anthropometrically and indirectly analyzed photographically. The result of factor analysis indicated that 6 factors were extracted through factor analysis and those factors comprise 70.2% of total variance. Using factor scores cluster analysis was carried out and the subject were classified into 3 cluster as their lower boby front and side silhouette.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1515-1517
• /
• 2008

The purposes of this study were to measure the ranges of motion in knee joint and during continuous passive motion(CPM) treatment and to computationally calculate joint angles at the knee joint dependent on the CPM machine design and its application. Four CPM machines and eleven candidates were recruited for this study. Experimental and numerical studies have been peformed to calculate the range-of-motion of CPM machines. From the experimental measurements, the average range of motions at the knee joint for the CPM machine #1, #2, #3, and #4 were lower than the manufactures suggested values due to improper alignments of the hip and knee joints to the CPM machines. Different design of CPM machine generated different outcomes of the ROM at the knee joints during CPM. The experiments and kinematic simulation in this study could be used to provide useful guidance in the treatment of CPM after joint surgery.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.1028-1034
• /
• 2007

In order to establish a criteria of solid particle separation performance test on marine centrifugal purifier at factory acceptance test, an investigation had been done on criteria of test standards, regulations and test specifications of purifier manufactures. KS V 7836, fuel oil and lubricating oil purifiers for marine use-centrifugal type, the criteria of solid particle separation is studied in the point of reality, restricts and analysis method. It is proposed that a reasonable criteria and analysis method should be adopted, and the current criteria shall be revised to adequate levels considering reasonable basis and industrial technology levels. Also, the test analysis conceptions, separation efficiency method and particle size restriction method, are reviewed to fulfil separation performance test for marine centrifugal purifiers.

• Korean Journal of Microbiology
• /
• v.15 no.2
• /
• pp.85-92
• /
• 1977

We have in vestigated on physico-chemical and biological test of plastic transfusion set which was manufactured from the three companies after $Co^{60}\;{\gamma}-radiation$. The results obtained were as follows ; 1) In physico-chemical test generally showed a tendency to decrease of pH and tensile strength, and increase of oxidizable matter, phosphoric acid-phosphosphate and heavy metals in its eluted solution by irradiation of 2,5 Mrad. 2) In biological test including toxicity and safety test were passed but indicating haemolysis range the haemolysis test were failed to pass from 30% to 50%. 3) We have found that the raw materials of plastic transfusion set according to manufactures are all different and especially the most radioresistant raw material wss found in the product which was manufactured from C company.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1539-1541
• /
• 2002

When did Metal (Au, Al) electrode differently, it is spread already that it is by energy level of electrode difference of electrical conductivity. This paper, experiment manufactures device of Metal/Organic Films/Metal structure using PBDG and I-V properties by electrode analyzed comparison. Also, measure energy level by electrode by propertiesy electrochemistry and studied about electron transfer of organic thin film in LUMO level relation with HOMO level.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.2
• /
• pp.90-95
• /
• 2006

An on-line diagnostic test has been studied and performed for the pumped storage generator/motor. This study aims at reducing the diagnostic cost, minimizing the technical dependency on third party manufactures. Further design of on-line diagnostic system such as shorted-turn of rotor winding, partial discharge (PD) of stator winding and air-gap between stator and rotor for pumped storage generator/motor has been verified. In addition, it needs to be validated on site performance of the developed continuous on-line monitoring system for corresponding tasks for the improvement of the availability & reliability during operation.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.260-262
• /
• 2002

The scope of applications industrial or household manufactures, is on the increase. In this study, it applies a principle of induction heating to food dryness for preservation of food. And it applies indirect heating process using overheating steam, which analyzes thermal characteristic of heating apparatus depending on its construction. It was verified that application of proposed process was appropriate by drying test of food.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.29-31
• /
• 2002

Purpose of the 765kV trial operation conducted for the first time in our country are performance verification of domestic developed equipment(765kV M.Tr, GIS,etc) and extraction of problem in advance to commercial operation and cultivation of operation ability. The trial operation of 765kV substation was finished successfully under the positive supports of institutes. manufactures. and constructers. It is expected that extraction of problems in advance and accumulation of operation techniques through the trial operation of 765kV substation will be contributed largly to the realization of the without a hitch operation of 765kV system.