• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.76-82
• /
• 2010

A laborer always watched a process of production carefully but defective manufactures were inspected after press process. These inspections made a waste of human power and defective manufactures could make a serious damage of press mold. Therefore, AE(Acoustic Emission) system was introduced to prevention of the damage of the press molds, to a real time detection of defective manufactures and to save human power. AE system was introduced to solve this problem which is a detecting defective manufacture on real time and to prevent the damage of the press mold. In this research we get acoustic emission signal in accordance with weight and processing method of press by using AE sensor, Preamplifier, AE board signal board which occurs press processing and it analyzed various signal through using CMD8 software on the time. From the result, we found that the intensity and shape of the signal were changed according to the weight and processing type of the press. By using this special algorithm, it can judge the acoustic signal which occurs from press on real time.

• Environmental and Resource Economics Review
• /
• v.11 no.3
• /
• pp.345-375
• /
• 2002

The purpose of this paper is to measure the change of the production efficiency which may happen when environmental regulation incurs technological constraint in the process of production, and to compute the opportunity cost of pollution reduction with the lost products based on the change of efficiency. The patterns of production technoloy in the paper are divided into the technologies of strong disposability and weak disposabilty to grasp the effect of the technological constraint due to the environmental regulation. The endowment of the technolgical constraints in the process of production is considered to bring the greatest restriction on firm's production. When the environmental efficiencies of Korean regional manufactures were measured with linear programming model, the lost products related with the constraint of production technology that environmental regulation incurred, was average 148.1 billion dollar per year(5.87% of one year overall products) for total manufactures in 1991~1998. The ratio of the lost products for total products was spread from 0.78% to 1l.08%. The average lost products of 15 regions were changed from 4.66% to 18.35% of total products. Generally the environmental efficiency index of regional manufactures being decreased continuously since 1991, it is estimated that the environmental performance of Korean manufactures has been more and more deteriorating.

• The Journal of Fisheries Business Administration
• /
• v.36 no.2 s.68
• /
• pp.97-120
• /
• 2005

This study focused on manufactures of meat and fish products among food manufactures, made a time series data for the period from 1983 to 2002, and applied the data to Hecksher-Ohlin model to analyze the elements of pattern of export in food processing industries of Korea. The results are as follows; First, the average annual growth rate of constant exports has increased for meat product and fish product industries in Korea. But, for fish product industries, it has decreased at large since the mid-1990s. Second, the average annual growth rate of physical capital index has increased for meat product and fish product industry, The rate has been more higher for fish product industry than for meat product industry. Third, the average annual growth rate of labor index has decreased for both meat and fish products industries. Fourth, physical capital index has had no significant impact on constant exports for meat product industry, while labor index has had a significant impact on it. Fifth, physical capital index has had a significant impact on constant exports for fish product industry, while labor index has had no significant impact on it.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.2
• /
• pp.329-339
• /
• 1995

This study intended to provide valuable basic data for an efficient using newspaper advertising to manufactures by investising and analyzing the character of newspaper as fashion advertising and media environment, consumer's attitude of advertising subscription, a degree of recognition and concern on a newspaper advertising and a degree of like on expressive form of a newspaper advertising. A question that is drawn up by researcher base on existing records and preceding study was used as major method for understanding consumer's consciousness. The sample group is composed of female students, working women, housewives who lives in Seoul. The results of this study were as follows. 1. Manufactures should be developing Headline in subject matter to get out of plain sale advertising and event advertising. 2. Manufactures should difference to understanding Illustration that consumer prefer. Also using of photography is efficient and it is importent to use of color advertising that appeal to consumer. 3. The informative advertising is a high degree of efficiency by reason that the newspaper offers great news source and information.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.187-190
• /
• 2000

Cyclocopter is air vehicle to vertically take-off and land like a helicopter. This is an efficient and quiet means of being able to direct thrust compared to a helicopter. The rotor consists of several blades rotating about a horizontal axis perpendicular to the direction of normal flight. The direction of blade span is parallel to rotating axis and both end roots are connected to the hub to resist centrifugal force and to transmit the power. The pitch of the individual blades to the tangent of the circle of the blade's path is varied cyclically to gain thrust. In the paper, the design and manufactures of cyclocopter rotor blades are presented. Stress at the roots of cyclocopter blades is great due to centrifugal and aerodynamic forces and aeroelastic instabilities appear. The blades consist of main spar, front spar, polyurethan foam, weight, and skin and spars and skin are made of glass/epoxy composite.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.459-471
• /
• 2010

This study examines the exposure effects of the brand of fashion manufacturers on the brand attitude of consumers towards the private brand of fashion retailers. In addition, it investigates the exposure effects of the brand of fashion manufacturers on the brand attitude of consumers towards the private brand of fashion retailers based on the sensitivity of consumers as related to the brand. Data are analyzed by a reliability analysis, a factor analysis, the correlation analysis, t-test, and one-way ANOVA. The main results are summarized as follows. First, when the private brand of fashion retailers (Perry Jensen) was shown to customers, three groups ('PB without exposing the brands of fashion manufactures', 'PB with exposing Galaxy', and 'PB with exposing Parkland') revealed statistically significant differences in consumer purchase intentions as well as brand preferences to the PB products of fashion retailers. The group of 'PB with exposing high-sensitive Galaxy group' showed an overall higher brand attitude than the other two groups-'PB without exposing the fashion manufactures' brands' and 'PB with exposing low-sensitive Parkland'. Second, in comparison with the effects of the brand sensitivity of each group, the group with the higher brand sensitivity showed statistically significant browsing intension as well as purchase intention on both brands of fashion manufactures (Galaxy and Parkland).

• Journal of Nutrition and Health
• /
• v.22 no.3
• /
• pp.149-158
• /
• 1989

To investigate the nutritional quality of packaged meals produced by packaged meal manufactures, a nutritional evaluation was conduced. Samples examined in this study were 95 Products which composed of 86 Doraks, 7 Kimplabs and 2 Yubuchopabs Produced in packaged meal manufactures in Seoul City and Kungki-do province The distribution of food groups showed that amounts of animal foods were abound, but amounts of green vegetables, limited in Dosirak comparing to one meal RDA levels. Amounts of meats, fishes and shells are increased more than amounts of egged and legumina with increase of price of Dosirak. The total kinds of food and the amounts of certain food in Kimpab and Yubuchopab were lower than Dosirak. The energy and protein contents of Dosirak were found to be higher than one meal RDA levels, with exception of protein content in Dosirak of the price 1000 won. The contents of energy and protein in Kimpab and Yubuchopab are less than one meal RDA levels. Calcium and iron contents in Dosirak, and calcium content in Yubuchopab were present in excess compared to the one meal RDA. However, In Kimpab, calcium and iron contents were lower than the one meal RDA. On the whole, vitamin contents of Dosirak were sufficient whereas vitamin contents of Kimpab and Yubuchopab were lower than the one meal RDA. Number of side dishes used in Dosirak were 6-23 items depending on prices. Guidelines were suggested for effective nutritional quality control of packaged meals.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.18-33
• /
• 2005

The purposes of this study were to investigate the difference of the SCM activities in the general characteristics of fashion enterprises and to inquire out the general characteristics affecting the introduction of SCM. The characteristics of apparel manufactures were also compared through the cluster analysis of the SCM activity levels of apparel manufactures. Through questionnaire survey, a total af 214 data - 123 from 64 apparel manufacturers, 46 from 40 fabric suppliers and 45 from 4 retailers - were used for analysis. The analysis on the relation between the SCM activity levels and the general characteristics of fashion enterprises showed that the SCM activities were affected by product assortment pattern and SCM introduction level for fabric suppliers, production method, product assortment pattern, business type and SCM introduction level for apparel manufacturers, and SCM introduction level for retailers. The cluster characteristics related to the SCM activity levels of apparel manufacturers showed that the clusters with higher level were tending to doing business internationally and trying to manufacture in a small lot in variety. The higher level clusters also revealed relatively low in the occupation ratio of fashion goods and high in quick response ratio compared to the lower level clusters.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.3-6
• /
• 2003

• International Journal of Automotive Technology
• /
• v.1 no.1
• /
• pp.9-16
• /
• 2000

The growing concerns on environmental protection have been constantly demanding cleaner and more energy efficient vehicles without compromising any conveniences provided by the conventional vehicles. The recent significant advances in proton-exchange-membrane (PEM) fuel cell technology have shown the possibility of developing such vehicles powered by fuel cells. Several prototype fuel cell electric vehicles (FCEV) have been already developed by several major automotive manufactures, and all of the favorable features have been demonstrated in the public roads. FCEV is essentially a zero emission vehicle and allows to overcome the range limitation of the current battery electric vehicles. Being motivated by the laboratory and field demonstrations of the fuel cell technologies, variety of fuel cell alliances between fuel cell developers, automotive manufactures, petroleum companies and government agencies have been formed to expedite the realization of commercially viable FCEV. However, there still remain major issues that need to be overcome before it can be fully accepted by consumers. This paper describes the current fuel cell vehicle development status and the staggering challenges for the successful introduction of consumer acceptable FCEVS.