• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.95-95
• /
• 2014

An OLED(Organic Light-Emitting Diode) device based on the emissive electroluminescent layer a film of organic materials. OLED is used for many electronic devices such as TV, mobile phones, handheld games consoles. ULVAC's mass production systems are indispensable to the manufacturing of OLED device. ULVAC is a manufacturer and worldwide supplier of equipment and vacuum systems for the OLED, LCD, Semiconductor, Electronics, Optical device and related high technology industries. The SMD Series are single-substrate sputtering systems for deposition of films such as metal films and TCO (Transparent Conductive Oxide) films. ULVAC has delivered a large number of these systems not only Organic Evaporating systems but also LTPS CVD systems. The most important technology of thin-film encapsulation (TFE) is preventing moisture($H_2O$) and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass substrate, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This report provides a review of promising thin-film barrier technologies as well as the WVTR(Water Vapor Transmission Rate) properties. Multilayer thin-film deposition technology of organic and inorganic layer is very effective method for increasing barrier performance of OLED device. Gases and water in the organic evaporating system is having a strong influence as impurities to OLED device. CRYO pump is one of the very useful vacuum components to reduce above impurities. There for CRYO pump is faster than conventional TMP exhaust velocity of gases and water. So, we suggest new method to make a good vacuum condition which is CRYO Trap addition on OLED evaporator. Alignment accuracy is one of the key technologies to perform high resolution OLED device. In order to reduce vibration characteristic of CRYO pump, ULVAC has developed low vibration CRYO pumps to achieve high resolution alignment performance between Metal mask and substrate. This report also includes ULVAC's approach for these issues.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2015

Electrical door system is one of the most essential items for the successful commercial operation of the railway vehicles. Nowadays, reliability values of electrical door system have a tendency to be included in technical requirements for design and manufacturing of rolling stocks. Manufacturer shall meet the reliability target values of electrical door system which is proposed by railway operator in procurement contract book. Railway operator shall approve the supplier's the reliability target values based on maintenance operation data. Railway operators are in the transition stage from the framework of maintenance interval based on time to the framework of maintenance interval based on distance. In this study, failure rates of the electrical door system currently used in railway vehicles are collected from maintenance field data. Failure rates are analyzed by using Minitab. Several kinds of plan for improving reliability are also suggested. It is necessary to keep studying on reliability prediction methodology, applying it in the field and implementing on improvement of reliability through feedback as well. Further, it will be useful for determining new maintenance policies or changing maintenance intervals for existing railway vehicles.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.959-972
• /
• 2018

Purpose: This study developed a simulation model that incorporates the uncertainty of demand and yield to obtain optimized results for supply chain coordination within environmental constraints. The objective of this study is to examine whether yield management for perishable products can achieve the goal of supply chain coordination between a single buyer and a single supplier under a variety of environmental conditions. Methods: We investigated the efficiency of a revenue-sharing contract and a wholesale price contract by considering demand and yield uncertainty, profit maximizing ratio, and success ratio. The implications for environmental variation were derived through a comparative analysis between the wholesale price contract and the revenue-sharing contract. We performed Monte Carlo simulations to give us the results of an optimized supply chain within the environments defined by the experimental factors and parameters. Results: We found that a revised revenue-sharing contracting model was more efficient than the wholesale price contract model and allowed all members of the supply chain to achieve higher profits. First, as the demand variation (${\sigma}$) increased, the profit of the total supply chain increased. Second, as the revenue-sharing ratio (${\Phi}$) increased, the profits of the manufacturer gradually decreased, while the profits of the retailer gradually increased, and this change was linear. Third, as the quality of yield increased, the profits of suppliers appear to increased. At last, success rate was expressed as the profit increased in the revenue-sharing contract compared to the profit increase in the wholesale price contract. Conclusion: The managerial implications of the simulation findings are: (1) a strategic approach to demand and yield uncertainty helps in efficient resource utilization and improved supply chain performance, (2) a revenue-sharing contract amplifies the effect of yield uncertainty, and (3) revised revenue-sharing contracts fetch more profits for both buyers and suppliers in the supply chain.

• Journal of Korea Trade
• /
• v.24 no.3
• /
• pp.37-54
• /
• 2020

Purpose - This study is to investigate the determinants of suppliers' dependence on buyers in the home country by developing a theoretical model of innovative activities. The high dependence of auto parts suppliers on a single local buyer in South Korea due to firm ownership issues and incremental innovation is examined using data from a set of organizations that supply intermediate goods to this automotive manufacturer. Furthermore, we tested the moderating effect of FDI and global knowledge sourcing on the relationship between firm ownership and suppliers' dependence on the local buyer. Design/methodology - To test the hypotheses, we examined a sample of 101 suppliers over 10 years in the Korean automobile parts industry. In this empirical analysis, we utilized a fixed-effects generalized least squares model using panel data. Findings - In this study, domestic firms (automobile parts suppliers) were more dependent on a single local buyer (automobile assembler) than foreign-owned suppliers operating in Korea. In addition, incremental innovation was the mediating mechanism between domestic firms and dependence on the local buyer. To reduce this dependence on the buyer, we suggest two different international strategies: geographical diversification through FDI and global knowledge sourcing. Originality/value - Previous studies showed that asymmetric dependence between firms has many adverse effects. This study proved that domestic and foreign-owned suppliers have different levels of dependence on local buyers due to their heterogeneous characteristics and business strategies. We distinguish two different types of innovation - radical innovation and incremental innovation - that previous studies have often treated as equal when it comes to firm autonomy. Finally, we propose that both FDI and international knowledge sourcing as global strategies to weaken suppliers' asymmetric dependence on a single buyer.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.277-278
• /
• 2001

The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1915-1926
• /
• 2008

Although we know that images of a country or an industry are influential factors in product evaluation, there has been little discussion about the channels through which consumers form a country or an industry image. Guided by the assumption that the image of the Korean fashion industry conveyed through U.S. media will likely affect the evaluation of Korean fashion products, we decided to examine articles published between January 1998 and June 2008 in Woman's Wear Daily(WWD), a prestigious U.S. daily trade newspaper covering all aspects of the national and international fashion business. By using the "Korean", we found 329 relevant articles. Through content analysis, we identified the aspects of the Korean fashion industry that have been considered salient to U.S. fashion media professionals. We set up categories based on the contents of the articles that discussed segments of the supply chain of the fashion industry. We found more comments on the Korean fashion industry as fiber and fabrics supplier or apparel manufacturer than in any other categories, which reflects that South Korea has been traditionally one of the most attractive sourcing countries for the U.S. fashion business. We identified significantly less coverage on the designing, branding, marketing, and retailing aspects of the Korean fashion industry. Due to economic boom in Korea, the country's fashion industry is recognized as having a highly fashion-conscious market that can afford the world's premium brands. However, the industry is viewed as being rather vulnerable to changes in the macro economic environment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.196-208
• /
• 1998

To improve the quality of environmental measurements and evaluation of the workplace air in the pigment manufacturing industries, we analyzed metal(chromium, cadmium, lead, iron, cobalt, manganese, antimony, titanium, arsenic, and selenium) concentrations by ICP-AES in sixty seven samples of inorganic bulk pigments which are produced and/or used in Korea. We also collected MSDS which has to be supplied by manufacturer and/or supplier and posted in the workplace according to the Hazard Communication Standards, and compared the number of metals listed in each MSDS with the number of metals determined by ICP-AES. Results were as followed; 1. Among seventeen yellowish-colored samples, chromium(2~19%) and lead(0.1~61%) were the two major metals. In thirteen reddish-colored samples, iron was the major component with 37~81%. Cobalt and manganese were detected in blue-colored samples with less than 1%, while antimony and titanium were the major two metals in white-colored pigments with 178~300 ppm and with 36~65%, respectively. 2. In area samples collected in workplace air(one pigments producing factory and five retailer stores), iron and manganese were detected but the concentrations not exceeded the TLVs(1 and $5mg/m^3$, respectively). In three of fifteen samples, the concentrations of lead exceeded the TLV ($0.05mg/m^3$). 3. Two out of seven companies provided MSDS, and the average provision rate was 22.4%. And the coincidence rate of the number of metals referenced in MSDS and determined by ICP-AES mostly accorded, but in one sample, different metal was detected from MSDS. In summary, metals have to be concerned in evaluation of the workplace air dealing with compounds of inorganic pigments dust are cobalt, chromium, iron, manganese, lead and antimony, and these are simultaneously determined by ICP-AES. Taking this opportunity, it is needed to reinforce that the personnel is to be concerned about prevention of workers' ill health regarding to provision of MSDS.

• Journal of Distribution Research
• /
• v.11 no.3
• /
• pp.55-78
• /
• 2006

In business-to-business setting, dyadic relationships between firms are of paramount interest. Recent developments in business practice strongly suggest that to understand these business relationships, greater attention must be directed to the embedded context within which dyadic business relationships take place. As a result, it is important to develop an understanding which is to move from dyadic business relationship to business networks. The purpose of the current study is (1) to identify types of network benefits: information acquisition, access to tangible resources, cooperative support from network members, (2) to model network benefit efforts on a customer orientation for customer firm, (3) to examine the relationship between network characteristics and network benefits. Adopting resource-based view and social capital theory, the conceptual model is proposed. In order to develop and test a model, this paper was empirically to examine how network characteristics can reinforce network benefits leading to focal firm's customer orientation using 123 firms. Through structural equation modeling, this research found that (1) density influences information acquisition, access to tangible resources, cooperative support from network members, (2) centrality increases information acquisition, access to tangible resources. We also find that information acquisition, access to tangible resources, cooperative support from network members enhances focal firm's customer orientation. Finally, We discuss several theoretical and practical implications, and suggest limitations for the research and future research issue.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.117-121
• /
• 2007

The number of internet users and the scale of electronic on-line trading are on the increase due to the development of information technology and the internet. The aim of this study was to monitor the accuracy of country-of-origin labels and the indicated contents of meat available by electronic on-line trading by using a structural interview sheet for 100 on-line meat product markets. The result of this investigation showed a 100% level of accuracy for business name and telephone number whereas the company address, meat manufacturer and supplier, and business registration were less reliable. We also investigated the accuracy of site policy, e-mail address, and fax number. The results showed that the accuracy of fax numbers was the lowest. The product name and the kind of meat actually in the product showed a 100% level of conformity, while the price (96.3%), place of origin (93.6%), capacity (90.4%), meat parts (80.9%) and contents of the product (73.4%) showed a relatively low level of conformity. Serious safety issues were exposed by the disturbingly low 20.2% accuracy of indicated expiration dates and 5.3% accuracy of indicated manufacturing dates. To ensure food safety, it is essential to improve consumer understanding and trust regarding food safety through continuous public relations. More education and information are needed to raise consumer awareness of the facts versus myths regarding food safety.