• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.8
• /
• pp.965-970
• /
• 2017

The objective of this study was to evaluate the effects of gelatin type (powder vs. hydrated) with or without transglutaminase (TGase) on the physicochemical and textural properties of low-fat model sausages (LFS). Treatments included LFS (control), LFS with hydrated-gel form of gelatin (1%), and LFS with powder form of gelatin (1%). Yellowness values of LFS with any type of gelatin were higher than those without gelatin (P<0.05). Moisture content (%) of LFS containing powder form of gelatin (1%) was higher than those with hydrated-gel form of gelatin or control (P<0.05). Expressible moisture (EM, %) of LFS with hydrated-gel form of gelatin was lower than those with powder form of gelatin (P<0.05). Thus, sausages with hydrated-gel form of gelatin showed better functional properties as compared to those with powder form of gelatin. To elucidate the interaction between gelatin and TGase in meat product, five actual sausages were manufactured: reference [konjac flour (KF), carrageenan (CN), and soy protein isolate], control (KF and CN alone), TRT1 (KF and CN, TGase 1%), TRT2 (KF and CN, gelatin 1%), and TRT3 (KF and CN, TGase 1%+gelatin 1%). EM (%) of sausages with TGase alone was higher than those of other treatments (P<0.05). Most textural properties of TRT3 were higher than those of other treatments. Thus, TRT3 showed better functional properties than those with single addition. In conclusion, a combination of TGase and gelatin could be used to manufacture LFSs with improved functional and textural properties.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.11-17
• /
• 2011

As a rapid rate of social change and competitive, paradigm of industry environment manufacturing products and services is shifted. Engineers design, develop, manufacture the products and services are strongly asked competency of different new creative practices. This means while industrial structure has been shifted from mass production to various allied production and social engineering based production, qualifications of engineers are required to individual creative competency as alternatives. In order to improve the competency, engineer become the creative people have ability to develop the professional knowledge competency and expand the competency to convergence the new product and services with sensing the life and social structure shift, human engineering, psychology, and emotion. For the competency, we develop the training program "improving convergence, creativity through Art." we intend that the program should be composed of creative engineering mechanism combined creative arts mechanism. It has been operated to the engineers for 17 weeks. we will discuss the program result and research direction and utilization in depth.

• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.735-741
• /
• 2011

Bealmijang is a short-term fermented regional product that is prepared with soybean and extra ingredients. In this study, starter strain candidates were screened from Bealmijang for fermented soybean paste products. Twenty one bacterial strains producing extracellular enzymes (amylase, cellulase, protease, xylanase and lipase) were isolated from Bealmijang, buckwheat sokseongjang. The isolates were assessed for fibrinolytic and antibacterial activities, and salt tolerance. Strain HJ18-4, identified as Bacillus subtilis (AB601598) by biochemical properties (89.6%) and 16S rDNA sequencing (100%), showed the highest enzymatic, fibrinolytic, and antibacterial activities among the isolates. Although the growth of HJ18-4 was inhibited by the increase of NaCl concentration, the growth still exceeded that of B. subtilis KACC 10114 at 5% and 10% NaCl. These results suggest that B. subtilis HJ18-4 is suitable as a starter for soybean paste manufacture.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.105-112
• /
• 2005

Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.

• Environmental Mutagens and Carcinogens
• /
• v.15 no.2
• /
• pp.115-121
• /
• 1995

Bacterial mutagenicity of shellfish or canned products of red-muscle fish affected by hot-airdry processings and/or during storages was investigated by Ames preincubation method. Mussel (Mytilus edulis) and surf clam (Tapes japonica) dried under either 40$\circ$C, 50$\circ$C or 60$\circ$C until remained about 25 % water content was stored at 4$\circ$C or 25$\circ$C for 6 months. Commercially available canned product of pacific saury (Cololabis saira) and mackerel saury (Scotnberjaponicus), whose producer or date of manufacture was identical each other, was stored at 25$\circ$C for 6 months. Mutagenic substances from sample (25 g dry weight) were extracted and purified for mutagenicity assay against S. typhitnurium TA98 by the simultaneous distillation extraction (SDE) method (Lee et al. 1955). Mutagenicity of sample was expressed number of revertant per 25 g dry sample. Number of revertant from unheated mussel sample was appeared to be 135, relative to 22 from unheated surf clam sample. Mutagenicity of both shellfish was strongly affected by heat treatment, but a lesser extent by storage conditions, even at 25$\circ$C for 6 months. Revertants of the mussel sample dried at 40$\circ$C, 50$\circ$C, or 60$\circ$C was found to be 227, 779, and 883, respectively. Similar, but lower, mutagenicity was observed from the sample of surf clam dried at 40$\circ$C, 50$\circ$C, or 60$\circ$C than mussel. Mutagenicity of canned pacific saury and mackerel samples was not influenced by storage conditions. Number of revertant from pacific saury was 175 which was relatively higher than 5 from mackerel. Mutagenicity of fresh pacific saury and mackerel samples was significantly higher than that of their counterparts from canned products. These results indicate that mutagenicity of the shellfish was affected by heat treatment (40$\circ$C, 50$\circ$C, or 60$\circ$C) used for drying process, but not much by storage for 6 months at 4$\circ$C or 25$\circ$C and the mutagenicity of canned products of red-muscle fish was not influenced by storage, even at 25$\circ$C for 6 months.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.386-394
• /
• 2009

Formaldehyde is used in lether manufacture, a dry plate and an explosive. It is by-product of ozonizing process in filtration plant. The effects of exposure are eye pruritus, tickle, runing nose, blocking nasal passages and headache. It also makes a dried throat and causes inflammation. It is classified as B1 group for inhalation by US. EPA, which can cause cancer in human. For analysis of formaldehyde, formaldehydes-DNPH derivative was extracted with solid cartridge and was analyzed by High Performance Liquid Chromatography/Diode Array Detector (HPLC/DAD). The detection limit was $3{\mu}g/L$ and the recoveries were 72.3~109.1% (RSD 2.9~11.5%). Water samples were collected in four Korean rivers, four times per year seasonally for 10 years from 1998 to 2007. The monitoring results were 48.8% (630/1291), $5.15{\sim}101.9{\mu}g/L$ in purified water. Because of non-carcinogen in drinking water, hazard index is calculated with RfD. Results of excess cnacer risk was below 1 and was considered as safe value.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.599-607
• /
• 2000

In this research, ${NH_4}^+-N$ and ${PO_4}^{3-}-P$ in wastewater were removed by crystallization. Nitrogen and phosphate have been regarded as key nutrients in the eutrophication of rivers and lakes. Struvite, $MgNH_4PO_4{\cdot}6H_2O$, is insoluble in alkaline solutions. Fertilizer industry wastewater contains organic and nitrogen concentration of 330 mg/L and 550 mg/L, respectively. Nitrogen in this wastewater cannot be treated by conventional biological treatment without physicochemical pretreatment, because nitrogen concentration is relatively high compared to organic concentration. Magnesium ions used in this study were from bittern and commercial magnesium salts of $MgCl_2$ and $Mg(OH)_2$. Bittern obtained as a by-product of seasalt manufacture contains $8,000mg\;Ca^{2+}/L$ and $32,000mg\;Mg^{2+}/L$. Optimum initial pH was 10.5~11.0 and the reaction was complete or done in 2 min. Nitrogen removal efficiency using bittern, $MgCl_2 $ and $Mg(OH)_2$ (as source of $Mg^{2+}$) was 71 %, 81% and 83%. respectively. Phosphate removal efficiency was 99%, 98% and 93%, respectively. Therefore, bittern, $MgCl_2$ and $Mg(OH)_2$ can be efficiently used as $Mg^{2+}$ source for crystallization of nitrogen and phosphate. However, bittern is economically favorable $Mg^{2+}$ source for removing nitrogen and phosphate in wastewater.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.44-63
• /
• 2000

Situated close to Heathrow Airport, and adjacent to the M4 and M25 Motorways, the site at Axis Park is considered a prime location for business in the UK. In consequnce two of the UK's major property development companies, MEPC and Redrew Homes sought the expertise of Intergeo to remediate the contaminated former industrial site prior to its development. Industrial use of the twenty-six hectare site, started in 1936, when Hawker Aircraft commence aircraft manufacture. In 1963 the Firestone Tyre and Rubber Company purchased part of the site. Ford commenced vehicle production at the site in the mid-1970's and production was continued by Iveco Ford from 1986 to the plant's decommissioning in 1997. Geologically the site is underlain by sand and gravel, deposited in prehistory by the River Thames, with London Clay at around 6m depth. The level of groundwater fluctuates seasonally at around 2.5m depth, moving slowly southwest towards local streams and watercourses. A phased investigation of the site was undertaken, which culminated in the extensive site investigation undertaken by Intergeo in 1998. In total 50 boreholes, 90 probeholes and 60 trial pits were used to investigate the site and around 4000 solid and 1300 liquid samples were tested in the laboratory for chemical substances. The investigations identified total petroleum hydrocarbons in the soil up to 25, 000mg/kg. Diesel oil, with some lubricating oil were the main components. Volatile organic compounds were identified in the groundwater in excess of 10mg/l. Specific substances included trichloromethane, trichloromethane and tetrachloroethene. Both the oil and volatile compounds were widely spread across the site, The specific substances identified could be traced back to industrial processes used at one or other dates in the sites history Slightly elevated levels of toxic metals and polycyclic aromatic hydrocarbons were also identified locally. Prior to remediation of the site and throughout its progress, extensive liaison with the regulatory authorities and the client's professional representatives was required. In addition to meetings, numerous technical documents detailing methods and health and safety issues were required in order to comply with UK environmental and safety legislation. After initially considering a range of options to undertake remediation, the following three main techniques were selected: ex-situ bioremediation of hydrocarbon contaminated soils, skimming of free floating hydrocarbon product from the water surface at wells and excavations and air stripping of volatile organic compounds from groundwater recovered from wells. The achievements were as follows: 1) 350, 000m3 of soil was excavated and 112, 000m3 of sand and gravel was processed to remove gravel and cobble sized particles; 2) 53, 000m3 of hydrocarbon contaminated soil was bioremediated in windrows ; 3) 7000m3 of groundwater was processed by skimming to remove free floating Product; 4) 196, 000m3 of groundwater was Processed by air stripping to remove volatile organic compounds. Only 1000m3 of soil left the site for disposal in licensed waste facilities Given the costs of disposal in the UK, the selected methods represented a considerable cost saving to the Clients. All other soil was engineered back into the ground to a precise geotechnical specification. The following objective levels were achieved across the site 1) By a Risk Based Corrective Action (RBCA) methodology it was demonstrated that soil with less that 1000mg/kg total petroleum hydrocarbons did not pose a hazard to health or water resources and therefore, could remain insitu; 2) Soils destined for the residential areas of the site were remediated to 250mg/kg total petroleum hydrocarbons; in the industrial areas 500mg/kg was proven acceptable. 3) Hydrocarbons in groundwater were remediated to below the Dutch Intervegtion Level of 0.6mg/1; 4) Volatile organic compounds/BTEX group substances were reduced to below the Dutch Intervention Levels; 5) Polycyclic aromatic hydrocarbons and metals were below Inter-departmental Committee for the Redevelopment of Contaminated Land guideline levels for intended enduse. In order to verify the qualify of the work 1500 chemical test results were submitted for the purpose of validation. Quality assurance checks were undertaken by independent consultants and at an independent laboratory selected by Intergeo. Long term monitoring of water quality was undertaken for a period of one year after remediation work had been completed. Both the regulatory authorities and Clients representatives endorsed the quality of remediation now completed at the site. Subsequent to completion of the remediation work Redrew Homes constructed a prestige housing development. The properties at "Belvedere Place" retailed at premium prices. On the MEPC site the Post Office, amongst others, has located a major sorting office for the London area. Exceptionally high standards of remediation, control and documentation were a requirement for the work undertaken here.aken here.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.