• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.83-88
• /
• 1998

II-anhydrite, slag, and fly ash produced as industrial by-product were reutilized for the manufacture of high strength admixtures for cement and concrete. The effects of these admixtures on the compressive strength of cement mortar and concrete were examined with those of domestic admixture. At the condition mortar and concrete. Especially, adding of II-anhydrite was very effective for the increasing of compressive strength. Therefore it is possible that these admixture as a high strength admixture apply to cement and concrete.

• 한국환경과학회지
• /
• 제4권2호
• /
• pp.195-220
• /
• 1995

A lot of sludges occur during an activated sludge treatment process of the washing wastewater and by-product waste in the cuttlefish processing manufacture. The sludges give also out a bad smell, and their amicable reclamation is very difficult because of the limited area of the filling-up. To reduce the heavy weight and large volume of the sludges, they was burning up. After the burning up at 350t for 2hrs the weight(volume) of the sludges were reduced to 5% level of the initial value. In contents of the bad heavy metals for human after the burning up, cadmium and lead metal were slightly detected, while mercury and the bad others not detected.

• International Journal of Advanced Culture Technology
• /
• 제2권1호
• /
• pp.30-32
• /
• 2014

3D printing technology polymeric material or plastic and metallic powder to suit the drafting of additive manufacturing would gradually products soars. 3D printing technologyapplication of a wide variety of industrial sectors. 3D printing technology enables raw materials consumption is less, the supply chain are shorter depending on the load and reduce the use of fossil fuels.Emergence of 3D printing technology so called the third industrial revolution in ICT market, quickly spread worldwide.In the future, 3D printing technology is simply beyond bio-technology, Nano-engineering, the manufacture of the product, incorporating a variety of technologies to improve the quality of life of human beings have played an important role will be.

• 마이크로전자및패키징학회지
• /
• 제8권2호
• /
• pp.49-52
• /
• 2001

This paper presents product level considerations for multichip packaging as a cost effective alternative to single chip packaging in the design and manufacture of mobile telephony products. Important aspects include component functionality and complexity, acquisition and logistics costs, product modularity and integration. Multichip packaging offers unique solutions and significant system level cost savings in many applications including RF modules, digital matrix functions and product options such as security, data storage, voice recognition, etc.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.1-7
• /
• 2001

This paper presents product level considerations for multichip packaging as a cost effective alternative to single chip packaging in the design and manufacture of mobile telephony products. Important aspects include component functionality and complexity, acquisition and logistics costs, product modularity and integration. Multichip packaging offers unique solutions and significant system level cost savings in many applications including RF modules, digital matrix functions and product options such as security, data storage, voice recognition, etc.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.585-589
• /
• 2009

Extruder is divided to greatly three part at extrusion process. First, by hopper(Hopper) second, barrel(Barrel) with Screw that is point of extruder and third that is raw material supply wealth extrusion into dies(DIES) Part that decide shape of do product greatly divide. Hopper is role that distribute in raw material supply wealth (Feeding zone) of Screw preserving raw material in state of high quality how at extrusion process, and make distributed raw material as Screw in barrel rotates and 3 stage and inflicting heat and pressure raw material melting(Melting) state. And raw material of melting state Screw's measuring stoker(Metering zone) whereabouts anaphora do and product is completed through pipe channel of dies. Dies that is the most important as Screw in extrusion is part that is last part of melting state process of raw material and causes huge effect in quality of product. If more than design of dies happens, manufacture itself of dies is hard, but there are a lot of amount of losses accordingly. In this research, make pipe channel that raw material of melting state flows in dies can present dies basic design method through flow analysis of ideal pipe channel using CFdesign.

• 한국경영과학회지
• /
• 제21권3호
• /
• pp.127-141
• /
• 1996

In this paper, we propose a 7-phase life cycle model which applies to Computer Integrated Manufacturing systems. The model emphasizes product design and manufacturing design activities of CIM to secure the critical success factors of CIM systems such as high quality, adaptability, productivity, and flexibility. It is argued that the product design aspect would be divided into three phases-conceptual design, embodiment design, and detialed design. The conceptual design phase is to build a conceptual model of the product based on requirements and specifications which reflect "the voice of the customer". THe embodiment design phase utilizes specific design tools such as DFM, CAE, and CAD, and results in a concrete model of the product and parts. The detailed design phase is to crete a working prototype of the product and design tools such as DFA. CAD and CAM are employed in this phase. The output of the product design activity is to be the input for the manufacturing design activity. Using the proposed model, one can effectively and efficiently manufacture a high-quality, low-cost product with short delivery time, and above all achieve customer'ssatisfaction.isfaction.

• 소성∙가공
• /
• 제8권5호
• /
• pp.482-490
• /
• 1999

7000 series Al alloy with good mechanical properties has been focused with tendency to reduce the components weight of aircraft and automobile. However, it is difficult to manufacture a sound extruded product because of segregation, grain growth, casting defect, surface defect, decreasing extrudability and so on. The objective of this study is to manufacture a new 7000 al alloy more than the extrudability of A7N01 and A7003 through controlling the weight (%) Mg, Zn, Si. Hot extrusion experiments on the axisymmetric rod are performed in 500℃ and also performed analysis of the same process using unmerical analysis method, a coupled rigid-thermoviscoplastic finite element method. Extrusion limit diagram was obtained for the developed alloy by FE-simulation in order to define the relationship of extrusion speed and initial billet temperature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1526-1531
• /
• 2007

Data transmission capacity that is required in 2010 is forecasted that increase by optical communication capacity more than present centuple, and is doing increased demand of optical communication related industry product present. Specially, Lid glass' application that is one of optical communication parts is used in optical communication parts manufacture of Fiber array, Ferrule array, Fanout Black, Silica optical waveguide chip and splitter etc. Also, it is used widely for communication network system, CATV, ATM-PON, FTTH and system. But, Lid glass need much processing times and becomes cause in rising prices of optical communication parts because production cost is expensive. The objectives, of this work is to suggest the micro concave and convex pattern manufacturing technology on borosilicate plate using high temperature and compression molding method. As a result, could developed micro pattern Mold more than 5 pattern, and reduce Lid Glass manufacture cycle time.

• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.65-75
• /
• 2004

Product liability is the law of the manufacturer's responsibilities for the consumers' personal injuries or the losses of property resulted from defective products. In today's many countries, the product liability law are being enacted because of the safety of product use and the protection of consumer's right. In korea, the product liability is going to enforce on July 1, 2002. Though the construction of product liability response system is urgent situation, domestic manufacture company's PL response system is not nearly prepared in present. Consequently, the purpose of this study is to discuss the Quality Management's importance and the PL countermeasures by presenting the difference of PL response system construction degree by the Quality Management Maturity degree