• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.647-650
• /
• 1997

A complete dome structure is based on a basic dome modeling, and the basic dome modeling affects safety of the dome structure. In other to save the manufacture expenses, an optimum shape modeling of a dome structure is necessary work of before manufacture of the dome. In this study, modeling of the triangle optimum shape in the surface of an aluminum dome is more focused to optimize shape of the dome and save manufacture expenses. After being made the systematic procedure of the basic modeling, the programming work of the procedure is performed. The program is made by C language, and the trust of the program is proved by comparison between output data of the program and basic modeling in PATRAN.

• 산업기술연구
• /
• 제21권A호
• /
• pp.251-256
• /
• 2001

This research is focused on an improvement of additional value of high grade limestone. To obtain the basic data of precipitated calcium carbonate(PCC), studies of physical properties of limestone, calcination and hydration characteristics, the characteristics to manufacture quick lime, hydrated lime, ground calcium carbonate and precipitated calcium carbonate were performed. In the carbonation process, formation of rombohedral must be kept under $10^{\circ}C$ for reaction. Although the temperature of reaction of lime milk was limited under $30^{\circ}C$ for a colloidal PCC manufacture, over $50^{\circ}C$ for spindle type PCC. The recommended reaction conditions for colloidal PCC are $20^{\circ}C$ of reaction temperature, 4% of $Ca(OH)_2$ concentration, 1000rpm of stirring rate and 200ml/min of $CO_2$ gas flow rate.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.376-379
• /
• 2003

In this raper, proposed easy half-wavelength LPF and acceptor structure in actuality manufacture using EBG (Electromagnatic Bandgap) structure for application of micro-strip circuit. Because conventional half-wavelength LPF and acceptor is narrow line-width of High impedance, actuality manufacture is difficult. Width that in proposed structure narrow microstrip line of High impedance EBG structure use and has equal impedance embodied to wide microstrip line. Also, it is seen that actuality manufacture is available applying to half-wavelength LPF that have cut-off Frequency of 3GHz.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.415-420
• /
• 2007

Generally, a diode package consists of the synthetic resin that has good durability but low thermal conductivity. The surface mounted type fast recovery diode was fabricated by using ceramic package. Its main manufacture processes are composed of soldering, sillicon coating and side termination. And it has various advantages that diode is small, easy manufacture and fast cooling. The electric characteristics of the diode such as reverse recovery time, breakdown voltage, forward voltage, and leakage current were 5.28 ns, 1322 V, 1.08 V, $0.45\;{\mu}A$, respectively.

• 소성∙가공
• /
• 제8권5호
• /
• pp.482-490
• /
• 1999

7000 series Al alloy with good mechanical properties has been focused with tendency to reduce the components weight of aircraft and automobile. However, it is difficult to manufacture a sound extruded product because of segregation, grain growth, casting defect, surface defect, decreasing extrudability and so on. The objective of this study is to manufacture a new 7000 al alloy more than the extrudability of A7N01 and A7003 through controlling the weight (%) Mg, Zn, Si. Hot extrusion experiments on the axisymmetric rod are performed in 500℃ and also performed analysis of the same process using unmerical analysis method, a coupled rigid-thermoviscoplastic finite element method. Extrusion limit diagram was obtained for the developed alloy by FE-simulation in order to define the relationship of extrusion speed and initial billet temperature.

• 한국산학기술학회논문지
• /
• 제5권2호
• /
• pp.93-97
• /
• 2004

본 논문은 로프 파단으로 인한 추락, Sheave 마모로 인한 마찰력 저하, 엘리베이터의 과속 상승, 엘리베이터 도어 Zone의 이탈 및 정전시 로프 브레이크가 동작하여 승객보호 목적을 배가하는 안전장치에 관한 것으로 기존의 제품과 다른 방식을 도입하여 승객과 설비를 보호할 수 있는 설계방법을 제시하고 제작을 통해 최적형상에 접근하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.467-469
• /
• 2000

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of Arac. acid deposited by LB method were deposited onto Y-type silicon wafer as x, y, z-type film. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V].

• 대한안전경영과학회지
• /
• 제11권3호
• /
• pp.33-40
• /
• 2009

Steel and iron manufacture works exist that many latency risk as melting liquid of high temperature, work of high place, and so on. Once in a while, the accident case make use of basic data for latency risk analysis in a place of business. In this paper, we investigated the cause of the accident in steel an iron works. The result, we came across that many latency risk in steel and iron manufacture works. The main type of risk are fall, narrow, come flying, etc. Most of the latency risk type are repetition and conventional accident. Accordingly, steel and manufacture works must prevent to repetition and conventional accident.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2150-2152
• /
• 2000

In this report, a technical trend of manufacture apparatus of PDP (Plasma Display Panel) was described. Though the manufacture process of PDP was not yet established, a big progress was achieved by much maker recently. Final target for PDP of much maker is focused on the cost down of PDP.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.153-162
• /
• 2001

This paper presents the fundamental study on rational manufacture of Ultra High Strength(VHS) concrete using industrial by-products as like silica fume, slag and fly ash. In this study, we had tested various mixing cases to manufacture the UHS concrete(target compressive strength : over $1,000kgf/cm^2$) which is easily workable (target slump flow : $60{\pm}10cm$). The main variables are studied: 1) to find the optimum replacement ratio of mineral admixture. 2) to find a rational water-binder ratio and a proper binder content. 3) to find the method for reduction of slump loss. From the test results, it is concluded that the rational mix design can be made by using 40% slag, 10% silica fume. We found that compressive strength of UHS concrete increases according to decreasing W/B ratio but in W/B ratio 18~20%, the difference is vague and the compressive strength does not necessarily increase according to increasing binder content over 700kg.