• 전기화학회지
• /
• 제4권1호
• /
• pp.1-5
• /
• 2001

리튬이온전지용 정극활물질인$LiMn_2O_4$ 정극복합제의 조성을 최적화 하기 위하여 활물질, 도전재, 결합제 등의 비표면적 비율을 인자로 이용하였다. 결합제는 최소한의 양으로 사용되어 도포 후, 그리고 전해액에 함침 되었을 때에도 집전체와의 접착력을 유지할 수 있어야 하며, 이를 위해서는 $130^{\circ}C$의 열압착이 효과적이었다. 결합제의 최소 필요량은 활물질 및 도전재의 표면적에 따라 변하는 값으로, 활물질 및 도전재의 전체표면적에 대한 결합제의 무게비율이 $1.1\%$ 이상일 때 탈리가 일어나지 않았다. 정극의 전자전도도를 증가시킴으로서 eel떠 내부저항을 낮출 수 있었으며, 전자전도도를 0.019mS/cm에서 0.036mS/cm로 증가시킴에 따라 0.2C rate에서의 방전용량에 대한 2C rate에서의 방전용량의 비율을 $76\%$에서 $93\%$로 $17\%$개선할 수 있었다.

• 한국추진공학회지
• /
• 제12권5호
• /
• pp.26-34
• /
• 2008

고농도 과산화수소를 분해시킬 수 있는 다양한 촉매의 성능을 비교하였다. 감마 알루미나에 산화망간, 백금, 이리듐을 각각 코팅하여 펠렛 촉매를 제작하였다. 각기 다른 세 가지 촉매를 이용하여 플라스크 반응기에서 반응성을 비교하였고, 50 Newton 급 추력기를 이용하여 펄스 응답 특성을 비교하였다. 그 결과 이리듐 촉매가 가장 높은 활성, 빠른 응답성을 나타내었으나, 연속모드에서 반응 실패 경향을 보여 과산화수소 분해용 촉매로는 부적절하였다. 백금, 산화망간 촉매 또한 우수한 반응성을 보여 높은 가능성을 보였으며, 고추력 추력기와 같이 촉매양이 많이 요구되는 경우, 비용문제를 고려한다면 산화망간 또한 과산화수소 분해에 적합할 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.409-409
• /
• 2011

All solid-state thin film lithium batteries have many applications in miniaturized devices because of lightweight, long-life, low self-discharge and high energy density. The research of cathode materials for thin film lithium batteries that provide high energy density at fast discharge rates is important to meet the demands for high-power applications. Among cathode materials, lithium manganese oxide materials as spinel-based compounds have been reported to possess specific advantages of high electrochemical potential, high abundant, low cost, and low toxicity. However, the lithium manganese oxide has problem of capacity fade which caused by dissolution of Mn ions during intercalation reaction and phase instability. For this problem, many studies on effect of various transition metals have been reported. In the preliminary study, the Sn-substituted LiMn2O4 thin films prepared by pulsed laser deposition have shown the improvement in discharge capacity and cycleability. In this study, the thin films of LiMn2O4 and LiSn0.0125Mn1.975O4 prepared by RF magnetron sputtering were studied with effect of deposition parameters on the phase, surface morphology and electrochemical property. And, all solid-state thin film batteries comprised of a lithium anode, lithium phosphorus oxy-nitride (LiPON) solid electrolyte and LiMn2O4-based cathode were fabricated, and the electrochemical property was investigated.

• 한국환경농학회지
• /
• 제26권2호
• /
• pp.141-148
• /
• 2007

Fly ash, a by-product of the coal-burning industry, and a potential source of ferro-alumino-silicate minerals, which contains high amount of ferric oxide and manganese oxide (electron acceptors), was selected as soil amendment for reducing methane $(CH_4)$ emission during rice cultivation. The fly ash was applied into potted soils at the rate of 0, 2, 10, and 20 Mg $ha^{-1}$ before rice transplanting. $CH_4$ flux from the potted soil with rice plants was measured along with soil Eh and floodwater pH during the cropping season. $CH_4$ emission rates measured by closed chamber method decreased gradually with the increasing levels of fly ash applied but rice yield significantly increased up to 10 Mg $ha^{-1}$ application level of the amendment. At this amendment level, total seasonal $CH_4$ emission was decreased by 20% along with 17% rice grain yield increment over the control. The decrease in total $CH_4$ emission may be attributed due to suppression of $CH_4$ production by the high content of active and free iron, and manganese oxides, which acted as oxidizing agents as well as electron acceptors. In conclusion fly ash could be considered as a feasible soil amendment for reducing total seasonal $CH_4$ emissions as well as maintaining higher grain yield potential under optimum soil nutrients balance condition.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.715-735
• /
• 2010

This study is designed to assess the priority order of the chemicals to cause to generate occupational diseases in order to understand the fundamental data required for the preparation of health protective measure for the workers dealing with chemicals. The 41 types of 51 ones of chemicals to cause to generate the national occupational diseases were selected as the study objects by understanding their domestic use or not, and their occupational diseases' occurrence or not among 110,608 types of domestic and overseas chemicals. To assess their priority order the sum of scores was acquired by understanding the actually classified condition based on a perfect score of physical riskiness(90points) and health toxicity(92points) as a classification standard by GHS, the priority order on GHS riskiness assessment, GHS toxicity assessment, GHS toxic xriskiness assessment(sum of riskiness plus toxicity) was assessed by multiplying each result by each weight of occupational disease's occurrence. The high ranking 5 items of chemicals for GHS riskiness assessment were turned out to be urethane, copper, chlorine, manganese, and thiomersal by order. Besides as a result of GHS toxicity assessment the top fives were assessed to be aluminum, iron oxide, manganese, copper, and cadium(Metal) by order. On the other hand, GHS toxicity riskiness assessment showed that the top fives were assessed to be copper, urethane, iron oxide, chlorine and phenanthrene by order. As there is no material or many uncertain details for physical riskiness or health toxicity by GHS classification though such materials caused to generate the national occupational diseases, it is very urgent to prepare its countermeasure based on the forementioned in order to protect the workers handling or being exposed to chemicals from health.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.96-104
• /
• 2023

Synergistically increased oxygen evolution reaction (OER) of manganese oxide (MnO₂) catalyst is introduced with surface-modified halloysite nanotube (Fe₃O₄-HNTs) structure. The flake shaped MnO₂ catalyst is attached on the nanotube template (Fe₃O₄-HNTs) by series of wet chemical and hydrothermal method. The strong interaction between MnO₂ and Fe₃O₄-HNTs maximized active surface area and inter-connectivity for festinate charge transfer reaction for OER. The synergistical effect between Fe₃O₄ layer and MnO₂ catalyst enhance the Mn³⁺/Mn⁴⁺ ratio by partial replacement of Mn ions with Fe. The relatively increased Mn³⁺/Mn⁴⁺ ratio on MnO₂@FHNTs induced 𝜎^* orbital (e_g) occupation close to single electron, improving the OER performances. The MnO₂@FHNTs catalyst exhibited the reduced overpotential of 0.42 V (E vs. RHE) at 10 mA/cm² and Tafel slope of (99 mV/dec), compared with that of MnO₂ with unmodified HNTs (0.65 V, 219 mV/dec) and pristine MnO₂ (0.53 V, 205 mV/dec). The present study provides simple and innovative method to fabricate nano fiberized OER catalyst for a broad application of energy conversion and storage systems.

• Composites Research
• /
• 제29권4호
• /
• pp.132-137
• /
• 2016

Based on mussel-inspired polydopamine (PDA), a novel technique to fabricate carbon nanowire (CNW) arrays is presented for a possible use of porous carbon electrode in electrochemical energy storage applications. PDA can give more porosity and nitrogen-doping effect to carbon electrodes, since it has high graphitic carbon yield characteristic and rich amine functionalities. Using such outstanding properties, the applicability of PDA for electrochemical energy storage devices was investigated. To achieve this, the decoration of the CNW arrays on carbon fiber surface was performed to increase the surface area for storage of electrical charge and the chemical active sites. Here, zinc oxide (ZnO) nanowire (NW) arrays were hydrothermally grown on the carbon fiber surface and then, PDA was coated on ZnO NWs. Finally, high temperature annealing was performed to carbonize PDA coating layers. For higher energy density, manganese oxide ($MnO_x$) nanoparticles (NPs), were deposited on the carbonized PDA NW arrays. The enlarged surface area induced by carbon nanowire arrays led to a 4.7-fold enhancement in areal capacitance compared to that of bare carbon fibers. The capacitance of nanowire-decorated electrodes reached up to $105.7mF/cm^2$, which is 59 times higher than that of pristine carbon fibers.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.385-387
• /
• 2002

Direct EPR evidence of the photo-generation of superoxide radicals ( $O_2$$^{-.}$) was obtained by using spin trapping techniques in spinach photosystem II (PSII) membranes. $O_2$$^{-.}$ was detected by following the formation of 5-diethoxyphosphoryl-5-methyl-1 -pyrroline-N-oxide (DEPMPO) superoxide adducts, DEPMPO-OOH. The significant increase of the EPR signal amplitude of DEPMPO-OOH in N$H_2O$H-, CaC $l_2$- and NaCl-treated PSII membranes showed that the oxygen-evolving system has a close relation to the $O_2$$^{-.}$ production. PSII membranes with inactivated donor side could not prevent the $O_2$$^{-.}$ production efficiently. Treatments on PSII donor side also influence the maximum level and the kinetics of Chlorophyll (Chi) a fluorescence. Results suggested that manganese cluster and extrinsic proteins might affect Chi a fluorescence in ways different from that happens at the acceptor side of PSII.SII.SII.

• Environmental Engineering Research
• /
• 제14권2호
• /
• pp.134-139
• /
• 2009

In this study, oxidation of As (III) as well as removal of total arsenic by adsorbents coated with single oxides or multi-oxides (Fe (III), Mn (IV), Al (III)) was investigated. In addition, multi-functional properties of adsorbents coated with multi-oxides were evaluated. Finally, application of activated carbon impregnated with Fe or Mn-oxides on the treatment of As (III) or As (V) was studied. As (V) adsorption results with adsorbents containing Fe and Al shows that adsorbents containing Fe show a greater removal of As (V) at pH 4 than at pH 7. In contrast adsorbents containing Al shows a favorable removal of As (V) at pH 7 than at pH 4. In case of iron sand, it has a negligible adsorption capacity for As (V) although it contains 217.9 g-Fe/kg-adsorbent, Oxidation result shows that manganese coated sand (MCS) has the greatest As (III) oxidation capacity among all metal oxides at pH 4. Oxidation efficiency of As (III) by IMCS (iron and manganese coated sand) was less than that by MCS. However the total removed amount of arsenic by IMCS was greater than that by MCS.

• 대한화학회지
• /
• 제57권6호
• /
• pp.769-777
• /
• 2013

The effect of operating conditions (temperature and the partial pressures of H2 and CO) on the reaction rate of Fischer-Tropsch synthesis (FTS) were investigated by carrying out experiments according to a Box-Behnken design (BBD), and were mathematically modeled by using response surface methodology (RSM). The catalyst used was a nano-structured cobalt/manganese oxide catalyst, which was prepared by thermal decomposition. The rate of synthesis was measured in a fixed-bed micro reactor with $H_2/CO$ molar feed ratio of 0.32-3.11 and reactor pressure in the range of 3-9.33 bar at space velocity of $3600h^{-1}$ and a temperature range of 463.15-503.15 K, under differential conditions (CO conversion below 2%). The results indicated that in the present experimental setup, the temperature and the partial pressure of CO were the most significant variables affecting reaction rate. Based on statistical analysis the quadratic model of reaction rate of FTS was highly significant as p-value 0.0002.