• Journal of the Korean Electrochemical Society
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2001

Composite ratio of $LiMn_2O_4$ in cathode was optimized as function of specific surface area. Binder has to be used as possible as little, and it should maintain adhesive property between cathode composite and current collector even though in electrolytes. For this purpose, We used 'Hot Roll Pressing' method, and it was effective. To prevent separation of cathode composite from current collector, PVDF(Polyvinylidenefluoride) has to be mixed more than $1.1\%$ in weight ratio to sum of surface area of lithium manganese oxide and conducting agents. Specific internal resistance was reduced as by increasing electrical conductivity of cathode. And Ratio of 2C rate discharge capacity to 0.2C rate discharge capacity was increased by $17\%$, as increasing electrical conductivity from 0.019 mS/cm to 0.036 mS/cm.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.26-34
• /
• 2008

The performance of several catalysts to decompose the high test peroxide (HTP) was described in this paper. Manganese oxide, Platinum and Iridium were coated on the gamma alumina. The catalyst activity as active materials was measured at the flask reactor. The response time of various catalysts was also measured with a 50 Newton class thruster. $Ir/Al_2O_3$ that showed the best activity in the flask reactor and response time at the thruster, failed the reaction when continuous mode test was carried out with the thruster. $Pt/Al_2O_3$ and $MnO_2/Al_2O_3$ can be substitutes to decompose the HTP. In addition, for larger thruster, $MnO_2/Al_2O_3$ can be a good catalyst because its cost is below 5 % of $Pt/Al_2O_3$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.409-409
• /
• 2011

All solid-state thin film lithium batteries have many applications in miniaturized devices because of lightweight, long-life, low self-discharge and high energy density. The research of cathode materials for thin film lithium batteries that provide high energy density at fast discharge rates is important to meet the demands for high-power applications. Among cathode materials, lithium manganese oxide materials as spinel-based compounds have been reported to possess specific advantages of high electrochemical potential, high abundant, low cost, and low toxicity. However, the lithium manganese oxide has problem of capacity fade which caused by dissolution of Mn ions during intercalation reaction and phase instability. For this problem, many studies on effect of various transition metals have been reported. In the preliminary study, the Sn-substituted LiMn2O4 thin films prepared by pulsed laser deposition have shown the improvement in discharge capacity and cycleability. In this study, the thin films of LiMn2O4 and LiSn0.0125Mn1.975O4 prepared by RF magnetron sputtering were studied with effect of deposition parameters on the phase, surface morphology and electrochemical property. And, all solid-state thin film batteries comprised of a lithium anode, lithium phosphorus oxy-nitride (LiPON) solid electrolyte and LiMn2O4-based cathode were fabricated, and the electrochemical property was investigated.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.141-148
• /
• 2007

Fly ash, a by-product of the coal-burning industry, and a potential source of ferro-alumino-silicate minerals, which contains high amount of ferric oxide and manganese oxide (electron acceptors), was selected as soil amendment for reducing methane $(CH_4)$ emission during rice cultivation. The fly ash was applied into potted soils at the rate of 0, 2, 10, and 20 Mg $ha^{-1}$ before rice transplanting. $CH_4$ flux from the potted soil with rice plants was measured along with soil Eh and floodwater pH during the cropping season. $CH_4$ emission rates measured by closed chamber method decreased gradually with the increasing levels of fly ash applied but rice yield significantly increased up to 10 Mg $ha^{-1}$ application level of the amendment. At this amendment level, total seasonal $CH_4$ emission was decreased by 20% along with 17% rice grain yield increment over the control. The decrease in total $CH_4$ emission may be attributed due to suppression of $CH_4$ production by the high content of active and free iron, and manganese oxides, which acted as oxidizing agents as well as electron acceptors. In conclusion fly ash could be considered as a feasible soil amendment for reducing total seasonal $CH_4$ emissions as well as maintaining higher grain yield potential under optimum soil nutrients balance condition.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.715-735
• /
• 2010

This study is designed to assess the priority order of the chemicals to cause to generate occupational diseases in order to understand the fundamental data required for the preparation of health protective measure for the workers dealing with chemicals. The 41 types of 51 ones of chemicals to cause to generate the national occupational diseases were selected as the study objects by understanding their domestic use or not, and their occupational diseases' occurrence or not among 110,608 types of domestic and overseas chemicals. To assess their priority order the sum of scores was acquired by understanding the actually classified condition based on a perfect score of physical riskiness(90points) and health toxicity(92points) as a classification standard by GHS, the priority order on GHS riskiness assessment, GHS toxicity assessment, GHS toxic xriskiness assessment(sum of riskiness plus toxicity) was assessed by multiplying each result by each weight of occupational disease's occurrence. The high ranking 5 items of chemicals for GHS riskiness assessment were turned out to be urethane, copper, chlorine, manganese, and thiomersal by order. Besides as a result of GHS toxicity assessment the top fives were assessed to be aluminum, iron oxide, manganese, copper, and cadium(Metal) by order. On the other hand, GHS toxicity riskiness assessment showed that the top fives were assessed to be copper, urethane, iron oxide, chlorine and phenanthrene by order. As there is no material or many uncertain details for physical riskiness or health toxicity by GHS classification though such materials caused to generate the national occupational diseases, it is very urgent to prepare its countermeasure based on the forementioned in order to protect the workers handling or being exposed to chemicals from health.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.1
• /
• pp.96-104
• /
• 2023

Synergistically increased oxygen evolution reaction (OER) of manganese oxide (MnO₂) catalyst is introduced with surface-modified halloysite nanotube (Fe₃O₄-HNTs) structure. The flake shaped MnO₂ catalyst is attached on the nanotube template (Fe₃O₄-HNTs) by series of wet chemical and hydrothermal method. The strong interaction between MnO₂ and Fe₃O₄-HNTs maximized active surface area and inter-connectivity for festinate charge transfer reaction for OER. The synergistical effect between Fe₃O₄ layer and MnO₂ catalyst enhance the Mn³⁺/Mn⁴⁺ ratio by partial replacement of Mn ions with Fe. The relatively increased Mn³⁺/Mn⁴⁺ ratio on MnO₂@FHNTs induced 𝜎^* orbital (e_g) occupation close to single electron, improving the OER performances. The MnO₂@FHNTs catalyst exhibited the reduced overpotential of 0.42 V (E vs. RHE) at 10 mA/cm² and Tafel slope of (99 mV/dec), compared with that of MnO₂ with unmodified HNTs (0.65 V, 219 mV/dec) and pristine MnO₂ (0.53 V, 205 mV/dec). The present study provides simple and innovative method to fabricate nano fiberized OER catalyst for a broad application of energy conversion and storage systems.

• Composites Research
• /
• v.29 no.4
• /
• pp.132-137
• /
• 2016

Based on mussel-inspired polydopamine (PDA), a novel technique to fabricate carbon nanowire (CNW) arrays is presented for a possible use of porous carbon electrode in electrochemical energy storage applications. PDA can give more porosity and nitrogen-doping effect to carbon electrodes, since it has high graphitic carbon yield characteristic and rich amine functionalities. Using such outstanding properties, the applicability of PDA for electrochemical energy storage devices was investigated. To achieve this, the decoration of the CNW arrays on carbon fiber surface was performed to increase the surface area for storage of electrical charge and the chemical active sites. Here, zinc oxide (ZnO) nanowire (NW) arrays were hydrothermally grown on the carbon fiber surface and then, PDA was coated on ZnO NWs. Finally, high temperature annealing was performed to carbonize PDA coating layers. For higher energy density, manganese oxide ($MnO_x$) nanoparticles (NPs), were deposited on the carbonized PDA NW arrays. The enlarged surface area induced by carbon nanowire arrays led to a 4.7-fold enhancement in areal capacitance compared to that of bare carbon fibers. The capacitance of nanowire-decorated electrodes reached up to $105.7mF/cm^2$, which is 59 times higher than that of pristine carbon fibers.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.385-387
• /
• 2002

Direct EPR evidence of the photo-generation of superoxide radicals ( $O_2$$^{-.}$) was obtained by using spin trapping techniques in spinach photosystem II (PSII) membranes. $O_2$$^{-.}$ was detected by following the formation of 5-diethoxyphosphoryl-5-methyl-1 -pyrroline-N-oxide (DEPMPO) superoxide adducts, DEPMPO-OOH. The significant increase of the EPR signal amplitude of DEPMPO-OOH in N$H_2O$H-, CaC $l_2$- and NaCl-treated PSII membranes showed that the oxygen-evolving system has a close relation to the $O_2$$^{-.}$ production. PSII membranes with inactivated donor side could not prevent the $O_2$$^{-.}$ production efficiently. Treatments on PSII donor side also influence the maximum level and the kinetics of Chlorophyll (Chi) a fluorescence. Results suggested that manganese cluster and extrinsic proteins might affect Chi a fluorescence in ways different from that happens at the acceptor side of PSII.SII.SII.

• Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.134-139
• /
• 2009

In this study, oxidation of As (III) as well as removal of total arsenic by adsorbents coated with single oxides or multi-oxides (Fe (III), Mn (IV), Al (III)) was investigated. In addition, multi-functional properties of adsorbents coated with multi-oxides were evaluated. Finally, application of activated carbon impregnated with Fe or Mn-oxides on the treatment of As (III) or As (V) was studied. As (V) adsorption results with adsorbents containing Fe and Al shows that adsorbents containing Fe show a greater removal of As (V) at pH 4 than at pH 7. In contrast adsorbents containing Al shows a favorable removal of As (V) at pH 7 than at pH 4. In case of iron sand, it has a negligible adsorption capacity for As (V) although it contains 217.9 g-Fe/kg-adsorbent, Oxidation result shows that manganese coated sand (MCS) has the greatest As (III) oxidation capacity among all metal oxides at pH 4. Oxidation efficiency of As (III) by IMCS (iron and manganese coated sand) was less than that by MCS. However the total removed amount of arsenic by IMCS was greater than that by MCS.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.769-777
• /
• 2013

The effect of operating conditions (temperature and the partial pressures of H2 and CO) on the reaction rate of Fischer-Tropsch synthesis (FTS) were investigated by carrying out experiments according to a Box-Behnken design (BBD), and were mathematically modeled by using response surface methodology (RSM). The catalyst used was a nano-structured cobalt/manganese oxide catalyst, which was prepared by thermal decomposition. The rate of synthesis was measured in a fixed-bed micro reactor with $H_2/CO$ molar feed ratio of 0.32-3.11 and reactor pressure in the range of 3-9.33 bar at space velocity of $3600h^{-1}$ and a temperature range of 463.15-503.15 K, under differential conditions (CO conversion below 2%). The results indicated that in the present experimental setup, the temperature and the partial pressure of CO were the most significant variables affecting reaction rate. Based on statistical analysis the quadratic model of reaction rate of FTS was highly significant as p-value 0.0002.