• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.525-537
• /
• 2018

The Korean coast is divided into the West Korea Coastal zone (WKC), the South Coastal zone of Korea (SCK), the East Korea Coastal zone (EKC), and Jeju Coastal zone of Korea (JCK). Each coastal zone has different marine environment characteristics. This study analyzed zooplankton data of KOEM (Korea Environment Management Corporation) collected in the Korean coastal waters the spring and summer of 2015 and 2016. In spring, water temperature was lowest in the JCK, and gradually increased in the order of EKC, SCK, and WKC, while in summer lowest in WKC and increased in the order of EKC, SCK, and JCK. Salinity was lowest in WKC which had many rivers flowing inland, and increased in the order of SCK, EKC and JCK in spring. In summer it was lowest in JCK and increased toward WKC, SCK, and EKC. In summer, Chlorophyll-a concentrations were generally low, but was lowest in JCK in spring. In the study area, a total of 77 species occurred, of which 50 species did in spring and 65 species in summer. The number of species was lowest in JCK and highest in SCK in spring and summer, respectively. Paracalanus parvus s. l. was the most dominant species or the second dominant species in Korean coastal areas in spring, but it was predominant in summer. In addition, in spring Acartia hongi, Calanus sinicus, Oithona similis were predominant in WKC, Oithona similis and Corycaeus affinis in SCK, O. similis and Corycaeus sp. in EKC, C. affinis and O. setigera in JCK. In summer Corycaeus spp., O. similis, A. hongi, Tortanus forcipatus were predominant in WKC, C. affinis, Pseudodiaptomus marinus in SCK, O. similis, A. omorii, Corycaeus sp. in EKC, and A. steueri, A. pacifica, Oithona sp., C. sinicus in JCK. The copepod community in the Korean coastal areas were classified into four areas, WKC-western SCK, eastern SCK, EKC and JCK according to differences in environmental factors such as water temperature, salinity, Chl-a concentration, and suspended matter concentration of each coastal area.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.129-150
• /
• 1985

The present investigation was conducted to provide a systematic approach necessary to establish an integrated insect pest management program of barley in Korea. Some ecological surveys on insect pests of barley have been undertaken at the field of Experimental Station, Ky$\check{o}$ngbuk Provincial Office of Rural Development as a fixed point survey area, and at 23 localities for round survey throughout southern and central Korea from 1983 to 1984. Previously known insects injurious to barley in Korea were revised and the population dynamics of 10 dominant harmful species were analyzed according to either 24 localities or 25 cultivars respectively by using several sampling methods of net sweeping, black light traps, yellow water pan traps and visual counting. As the results, a total of 94 species belonging to 77 genera under 32 families are known to be injurious to barley, among them 20 species are newly added here. In the population density level, the dominant species were disclosed as Laodelphax striatellus (43.1 %), Macrosiphum avenae(27.0 %), Rhopalosiphum padi(6.5 %), R. maidis(5.4 %), Psammolettix strialus(2.7 %), Chlorops oryzae(2.2 %), Agromyza albipennis(2.1 %) Phyllotreta nemorum(1.4 %), Chaetoenema cylindrica(1.0 %), Dolycoris baccarum(1.0 %) in order. For the general abundance of major insect pests, it was highest in the cultivar P'aldal whereas lowest in Milyang #22. There were tendencies that Psammotettix striatus, Dolycoris baccarum, Phyllotreta nemorum and Chaetocnema cylindrica represented a maximum increase in the beginning of June, while Chlorops oryzae and Agromyza albipennis showed in the middle of May but aphids were in the end of May. In the dominance of natural enemies, Nabis stenoferus occupied 21.4 % and Propylaea japonica 9.6 %.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.91-102
• /
• 1985

Growth and biomass production of natural stands of Quercus variabilis in relation to tree density were studied to obtain basic guide lines for future tending operation. Two natural stands of Quercus variabilis located at 900m (A stand: 6,600trees/ha, $15.84m^2/ha$, $\frac{19}{17-20}$) and 800m (B stand: 4,300trees/ha, $16.65m^2/ha$, $\frac{20}{17-21}$) elevation in Sancheong, Kyongnam Province were selected for the comparative study and following results were obtained through a sample plot method. After diameter of individual trees in the sample plots was measured, twelve average trees from each diameter class were cut felled to measure dry weight of $W_S$, $W_B$, $W_L$, $W_{Ba}$, and standing biomass and biomass production rates by a allometrior regressions related to $D^2H$. Vertical distribution of leaves along the stems indicated that photosynthesis was carried out 2.2m above the ground in Stand A and 1.2m in Stand B. Maximum photosynthesis was located 4.2m and 6.2m above the ground in Stand A and B, respectively. Leaf area index was 4.25ha/ha for Stand A, and 3.89ha/ha for Stand B. Above-ground standing biomass was 49.51 ton/ha for Stand A and 59.20 ton/ha and net annual production was 6.75 ton/ha/yr. for Stand A and 8.99 ton/ha/yr. for Stand B. The ratio of net annual production to standing biomass was 17.5% for Stand A and 16.7% for Stand B. Net assimilation rate was 2.75kg/kg/yr. for Stand A and 3.58kg/kg/yr. for Stand B. Stem wood production rate was 1.46kg/kg/yr. for Stand A and 2.09kg/kg/yr. for Stand B. Bark production rate was 0.60 kg/kg/yr. for Stand A and 0.34kg/kg/yr. for Stand B. Above data indicated that Stand B utilized growing spaces and sites more efficiently than Stand A. It is concluded chat productivity of natural stands of Quercus variabilis can be enhanced through optimization of basal areas and number of tree per hectare and that sound management of natural oak stands should be based on systematic sampling of the area for periodic productivity estimation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.225-231
• /
• 2020

Fresh water that can be used by a person of the total amount of water on the planet is increased because it is less than 0.01 % except underground water, ice and snow, etc. water management response need. In order to protect and efficiently utilize water resources, major countries are conducting water footprint studies that can quantitatively estimate the amount of water put into the operating phase of the resource harvesting phase, mainly agriculture. Korea has also recently developed a number of policies in order to cope with water shortages, and in the construction industry, as well as the need for basic research to support it has been emphasized. This study was constructed DB up to the raw material harvesting step, the transport step, the production stage in order to estimate the water consumption of resources to be put into the work process to target the drainage of the road. Water usage estimation method was utilized the method presented in the Water Footprint Manual and the environmental score card certification guide, unit water usage each drainage main method was calculated after estimating the water footprint considering the water character factor, indirect water and the direct water, the water consumption factor of material input to each process. Brown asphalt, rebar, remicon of the drainage material as a result of the water footprint calculation accounted for 97 % of the total. Drainage method is a culvert, a side channel, a culvert wing wall, reinforced concrete open channel accounted for 92.2 % of the total. Drainage total step-by-step calculated water consumption and water footprint was found in order of raw material harvesting step, transport stage, production stage. Water footprint each drainage method or total drainage material calculated in this study can be used as a base data in the agricultural and construction sectors. In order to increase the reliability of the analysis, it is believed that further overseas databases will be needed for continuous review and research.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.129-141
• /
• 2023

Crop models have been used to predict yield under diverse environmental and cultivation conditions, which can be used to support decisions on the management of forage crop. Cultivar parameters are one of required inputs to crop models in order to represent genetic properties for a given forage cultivar. The objectives of this study were to compare calibration and ensemble approaches in order to minimize the uncertainty of crop yield estimates using the SIMPLE crop model. Cultivar parameters were calibrated using Log-likelihood (LL) and Generic Composite Similarity Measure (GCSM) as an objective function for Metropolis-Hastings (MH) algorithm. In total, 20 sets of cultivar parameters were generated for each method. Two types of ensemble approach. First type of ensemble approach was the average of model outputs (E_em), using individual parameters. The second ensemble approach was model output (E_pm) of cultivar parameter obtained by averaging given 20 sets of parameters. Comparison was done for each cultivar and for each error calculation methods. 'Jowoo' and 'Yeongwoo', which are forage rice cultivars used in Korea, were subject to the parameter calibration. Yield data were obtained from experiment fields at Suwon, Jeonju, Naju and I ksan. Data for 2013, 2014 and 2016 were used for parameter calibration. For validation, yield data reported from 2016 to 2018 at Suwon was used. Initial calibration indicated that genetic coefficients obtained by LL were distributed in a narrower range than coefficients obtained by GCSM. A two-sample t-test was performed to compare between different methods of ensemble approaches and no significant difference was found between them. Uncertainty of GCSM can be neutralized by adjusting the acceptance probability. The other ensemble method (E_pm) indicates that the uncertainty can be reduced with less computation using ensemble approach.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.3
• /
• pp.13-21
• /
• 2017

This study was carried out to evaluate the application effects of fish meal liquid fertilizer on soil characteristics and growth of cucumber for organic cultivation. Cucumber in greenhouse was transplanted on March $31^{th}$ in 2016, and the experimental treatments involve six treatments: No fertilizer, 0, 25, 50, and 100 mg/L N application by fish meal liquid fertilizer and chemical fertilizer. In the results of soil chemical property, application of 100 mg/L of fish meal liquid fertilizer showed a significant differences in pH, K, and Mg contents. The soil microbial community varied in relation to the fish meal liquid fertilizer treatments. Microbial biomass was lower in the chemical fertilizer than in the liquid fertilizer treatment. Result of principal component analysis obtained from Ecoplate showed that fish meal liquid fertilizer treatments, no liquid fertilizer, chemical fertilizer, and no fertilizer were divided into distinct groups, with the no fertilizer treatment located furthest from the other treatments. There were no significant differences in plant height of cucumber between the fish meal liquid fertilizer treatments and chemical fertilizer treatments. Also, the cucumber yield did not vary significantly between the concentrations of liquid fertilizers, and there were also no significant differences in the yield among the fish meal liquid and chemical fertilizer treatments. In conclusion, it is suggested that the application of fish meal liquid fertilizer can be used as a additional fertilizer for cucumber production with organic culture in greenhouse.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.398-410
• /
• 1982

Summer crops grown in uplands are greatly diversified and show a large variation in difference with year and location in Korea. The principal factor for the variation is weather, in which precipitation and temperature play a leading role and such a weather factors as wind, sun lights also influence production of the summer crops. Since artificial control of weather conditions as a main stress factor for crop production is almost impossible, it must be minimized only by an improvement of cultivation techniques and crop improvement. Precipitation plays a role as one of the most important factor for production of the summer crops and it is considered in two aspects, drought and excess moisture. This country, which belongs to monsoon territory, necessarily encounter one of this stress almost every year, even though the level is different. Therefore, the facilities for both drought and excess moisture are required, but actually it is not easy to complete for them. On this account, crops tolerant to drought, excess moisture and pests should be considered for establishing summer crops. For the districts damaged habitually every season, adequate crops should be cultured and appropriate method of planting, drainage and weed control should be applied diversely. Injuries by temperature is mainly attributed to lower temperature particularly in late fall and early spring, although higher temperature often causes some damages depending upon the kind of crops. Sometimes, lower temperature in summer season playa critical role for yield reduction in the summer crops. However, certain crops are prevented to some extent from this kind of stress by improving varieties tolerant to cold, hot weather or early maturing varieties. As is often the case, control of planting time or harvesting is able to be a good management for escaping the stress. Lodging, plant diseases and pests are considered as a direct or indirect damage due to weather stress, but these are characters able to be overcome by means of crop improvement and also controlled by other suitable methods. In addition, polytical supports capable of improving constitution of agriculture into modern industry is urgently required by programming of data for the damages, establishment of damage forecasting and compensation system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.155-163
• /
• 1999

Nutrient balance during rice cultivation in the paddy of a local area under the environmental protection for drinking water supply was investigated. To compare nutrient balance in the paddy soil applied with different types of fertilization, 7 treatments were selected as followings : Recommended level of chemical fertilizers(R), Conventional fertilization(CF), Fresh cow manure(FCM), Cow manure compost(CMC), Straw compost+reduced chemical fertilizer(SCF), Fresh straw+recommended level of fertilizers(FSC), and no fertilization as control(C). Here, FCM, CMC and SCF were applied at the same level of total nitrogen as recommended in R. Rice yield was the highest in the recommendation(R) and fresh cow manure (FCM) treatments with $6,730kg\;ha^{-1}$(index 100), and followed by SCF (index 98), FSC (index 98), CMC(index 94), and CF(index 94). But statistically significant difference was not recognized among treatments except the control. Nitrogen infiltration loss was high in the simple chemical fertilizer treatments with $63kg\;ha^{-1}$ in CF and $58kg\;ha^{-1}$ in R during rice cultivation, respectively. Nitrogen infiltration loss was decreased below half level of chemical fertilizer treatments with cow manure treatments ($23kg\;ha^{-1}$ in FCM and $27kg\;ha^{-1}$ in CMC) and with reducing chemical fertilizer treatment by adding straw compost ($25kg\;ha^{-1}$). Phosphate was not leached during rice cultivation in paddy soil of a fluvial deposit type, in which oxidation horizon was developed broadly under around 15 cm depth of surface soil. Phosphate balance (A-B) was closed to 0 in all treatments except cow manure treatment (CMC), in which it was $+30kg\;ha^{-1}$ and show the possibility of over accumulation of phosphate by continuously replicated application of cow manure compost. Potassium balance was negative value in all but straw recycling treatment (FSC). It means that potassium was continuously supplied from soil minerals, uptaken by plants or eluted out of soil. In conclusion, by substituting inorganic fertilizer for organic fertilizer or reducing application rate of chemical fertilizer through mixing organic fertilizer, it would be possible to achieve the same rice yield as in the recommendation treatment and to decrease nutrient leaching below half level in rice paddy soil.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.177-192
• /
• 2021

The Development Assistance Committee of the Organization for Economic Cooperation and Development discusses the reorganization of the five evaluation criteria of the Public Development Assistance Committee, which are used internationally, and the five evaluation criteria including adequacy, efficiency, effectiveness, impact, and sustainability when assessing public development assistance in 1991. This study is to derive alternatives by applying the evaluation criteria of the Development Assistance Committee of the Organization for Economic Cooperation and Development in the evaluation of the inclusive business program being implemented in Nepal since 2019. As a result of the study, the adequacy of Nepal's inclusive business program was consistent with continuous employment and job creation for vulnerable groups such as disabled and orphan women. Efficiency can be said to be efficient in that processes such as work order and work confirmation are made with an electronic management tool, and delivery of the result is transmitted online, saving time and cost compared to other industries. The effectiveness of this project can be said to be an effective program in that it provides high-quality jobs such as providing specialized computer graphics education for the vulnerable, such as disabled and orphan women in Nepal, and hiring graduates as employees. Sustainability is the point that KOICA's inclusive business program has enabled vulnerable groups in the existing fields of agriculture and manufacturing to engage in the computer graphics industry, and the scalability of movies, characters, education businesses, and role models in other countries.However, considering that the scale of public development assistance will continue to increase in the future, it is necessary to establish a systematic monitoring system and a recirculation system so that the project between the donor and recipient countries can continue.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.63-77
• /
• 2018

In the rapidly to change global market in recent years, as the era of merging and integrating industries and the evolution of technology have come to an era in which everything can not be solved as a single company, it is evolving into competition for the enterprise network rather than the competition for the enterprise unit. In a competitive business environment, it is necessary to provide not only for the efforts as an individual companies but also the mutual development efforts to enhance output through the innovation activities based on the interrelationship with the business partners. In spite of the recent efforts and research through core competencies and innovation activities, some of business activities were unable to achieve enough progress in business performance and this study mainly focused to improve business performance for those companies. This study targeted CEOs and Directors who participates in "manufacturing performance innovation partnership project" carried by The foundation of Large, SMEs, Agriculture, Fisheries cooperation Korea and studied the influences of innovation activities to the core competencies and business performance. Detailed variables in this study were extracted from the previous research and used for verification. The study is designed to determine the influence of individual innovation activities to the core competencies and business performance. Innovation activities as a parameter, the relationship between core competencies and business performance was examined. In the examination of the innovation activities as a meditated effect, those activities carried by SMEs (Collaboration in Technology, Manufacturing, and Management innovations with Large Scale Business) through partnership in manufacturing innovation is significantly related business performance. Therefore, the result reveals that the individual SMEs are having own limitation in the achievement of significant progress in business performance with their own capabilities, and using the innovation activities act as catalyst through the collaboration with large scale businesses would result significant progress in business performance. Mutual effort in collaborative innovation activities between large scale businesses and SMEs is one of the most critical issues in recent years in Korea and the main focus of this study is to provide analysis which demonstrates where the SMEs are required to focus in their innovation activities.