• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.863-868
• /
• 1989

In comparison of contents of the components related to the quality of kiwifruit depended on the cultivars, the obtained results were as follows; Abbott showed the highest values in soluble solid, crude fat, firmness and specific gravity. Potassium, phosphorus, calcium and magnesium were estimated as the major minerals in kiwifruit and Bruno contained the highest amounts of potassium and magnesium. Bruno also had high concentrations of ascorbic, maleic, citric and fumaric acid when compared with the other cultivars. The changes in chemical components of kiwifruit (Hayward) by ripening stage were as follows; During ripening, the glucose and fructose contents were increased with decrease of sucrose content. Ascorbic, maleic, fumaric and succinic acid contents were considerably increased during ripening From the investigation of changes in protein pattern by electrophoresis! the new bands with about 17,000-23,50kd were shown during ripening.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.589-598
• /
• 2000

In this study, various unsaturated polyester (UPE) resins were prepared from the condensation polymerization of mixtures of saturated (isophthalic acid : IPA) and unsaturated (maleic anhydride : MA) dibasic acids with propylene glycol (PG), neopentyl glycol (NPG). The critical surface tension (Υ$_{c}$) for the surface characteristics of a solid were estimated by Zisman plot, and the structure-property relationship was investigated by measuring the rheology of resins. The values of Υ$_{c}$ for glass of solid were 30.5 mNㆍm$^{-1}$ for UPE resin liquids. As the content of NPG in a PG/NPG glycol mixture increased, both the contact angle and the surface tension of the UPE resin liquids were found to decrease. The dynamic viscoelasticities of UPE resins with different glycol molar ratios were also measured. Shear rate dependence of viscosity and angular frequency dependence of storage, and loss modulus tended to decrease with increasing NPG content.

• KSBB Journal
• /
• v.11 no.6
• /
• pp.712-717
• /
• 1996

Cellulase was modified with synthetic copolymers of polyoxyethylene derivative and maleic acid anhydride. The saccharification characteristics and enzymatic reaction kinetic mechanism of modified and native cellulases were observed. In modification reaction of cellulase, degree of modification(DM) increased, as mass ratio of copolymers to enzyme increased. Maximum DM was 55% at mass ratio of 4 and remained activity was 75%. In saccharification experiment modified enzyme had maintained higher stability than native enzyme over all the reaction and the final conversion yield of modified enzyme was greater than that of native enzyme. Numerical simulation based on the reaction mechanism considering enzymatic deactivation was performed. Modified enzyme had kept higher free enzyme concentration over all the reaction than that of native enzyme. Comparing calculation values with experimental data, calculation values were in accordance with experimental data.

• Asian Journal of Atmospheric Environment
• /
• v.3 no.1
• /
• pp.42-51
• /
• 2009

Saturated n-dicarboxylic acids ($C_2-C_7$, $C_9$), unsaturated dicarboxylic acids (maleic, fumaric, phthalic acid), ketocarboxylic acids (pyruvic, glyoxylic acid), and dicarbonyls (glyoxal, methylglyoxal) were determined in size-segregated samples with a high-volume Andersen air sampler at a suburban site in Saitama, Japan, May 12-17 and July 24-27, 2007 and January 22-31, 2008. The seasonal average concentrations of these detected organic acids were 670 $ng/m^3$, accounting for about 4.4-5.7% (C/C) of water-soluble organic carbon (WSOC) and 2.3-3.6% (C/C) of organic carbon (OC). The most abundant species of dicarboxylic acids was oxalic acid, followed by malonic, phthalic, or succinic acids. Glyoxylic acid and methyglyoxal were most abundant ketocarboxylic acid and dicarbonyl, respectively. Seasonal differences, size-segregated concentrations, and the correlations of these acids with ambient temperatures, oxidants, elemental carbon (EC), OC, WSOC, and ionic components were also discussed in terms of their corresponding sources and possible secondary formation pathways. The results suggested that photochemical reactions contributed more to the formation of particulate organic acids in Saitama suburban areas than did direct emissions from anthropogenic and natural sources. However, direct emissions of vehicles were also important sources of several organic acids in particles, such as phthalic and adipic acids, especially in winter.

• KSBB Journal
• /
• v.27 no.1
• /
• pp.51-56
• /
• 2012

This research was to investigate the polyester preparation using waste ethylene glycol (EG) generated from the wastepaper pretreatment process. Waste EG was obtained from using EG five times repeatedly in the pretreatment of wastepaper. The hydroxyl value of the waste EG was 441 mg KOH/g and its composition was 0.68% cellulose, 6.5% hemicellulose, 6.1% lignin, and 86.7% EG. Maleic acid was used as carboxylic acid. The effect of reaction temperature and time except carboxyl group/hydroxyl group ratio on the crosslinkage of the prepared polyester was marginal. Citric acid, lithium hydroxide and dicumyl peroxide were used as additive or catalyst to enhance the crosslinkage of polyester. Among them, 10% of citric acid was found to be most effective. The crosslinkage was 86% when the polyester was prepared at an optimum condition such as $130^{\circ}C$ and 15 minutes, 1.5 of C/H ratio, and 10% of citric acid, and its insoluble percentage in boiling water for 6 hours was 47%. The weight loss of the prepared polyester was approximately 40% when it was buried in damp soil for 5 months, indicating that it is readily biodegradable. This results can provide some information for future development of wastepaper pretreatment by organic solvent.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.195-198
• /
• 2004

In our previous study, the crosslinked PVA/PAM membrane was prepared to investigate the pervaporation performance, and analyzed by FT-IR and water swelling test. This main objective of this work was to investigate the aging effect of PVA/PAM membrane with swelling time.(omitted)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.29-32
• /
• 2004

Reduction of methanol crossover in proton exchange membranes (PEMs) can be achieved by 1) the selection of materials, 2) the morphology control, and 3) the adequate crosslinking [1, 2]. The selection of polymer matrix of PEM for direct methanol fuel cells (DMFCs) is very important because the proton conductivity and methanol permeability are largely dependent upon the properties of polymers.(omitted)

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1421-1427
• /
• 1999

4-Hydroxy-4'-methoxyazobenzene and 4-hydroxy-4'-cyanoazobenzene were synthesized from phenol with p-anisidine and p-aminobenzonitrile through a diazotization reaction, respectively. They were reacted with 2-chloroethanol, 2-(2-chloroethoxy)ethanol, or 2-[2-(2-chloroethoxy)ethoxy]ethanol to produce six kinds of new mesogenic alcohols having an azobenzene group that is sensitive to the ultraviolet. Twelve kinds of new photoresponsive monomers with two symmetrical mesogens were prepared by the reaction of the mesogenic alcohols with fumaric acid or maleic acid through a Mitsunobu reaction. The resulting monomers have different length of flexible ethyleneoxy spacer tethered to azobenzene group. The length of the spacer affected their thermal stability, solubility, and phase transition temperature. Structures of the monomers were identified by FT-IR and ¹H-NMR spectra. Their phase transition temperatures and thermal stability were also investigated by a differential scanning calorimetry (DSC) and a thermogravimetric analysis (TGA). From an optical polarizing microscopy, all the prepared monomers except fumarate-1 and maleate-1 were found to show enantiotropic liquid crystallinity with a smectic texture like focal-conic, fan-shaped, and batonnet textures.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.311-317
• /
• 2007

Proton conducting crosslinked membranes have been prepared by polymer blending, which consist of poly(vinyl alcohol-co-ethylene) (PVA-co-PE) and poly(styrene sulfonic acid-co-maleic acid) (PSSA-co-PMA) at 50 : 50 wt ratio. Two kinds of PSSA-co-PMA copolymer with 3 : 1 and 1 : 1 the molar ratio of PSSA to PMA wereused as a proton conducting source. The ethylene content of PVA-co-PE was also changed as 0, 27 and 44 mol%. The membranes were thermally crosslinked via the esterification reaction between -OH of PVA and -COOH of PMA, as demonstrated by FT-IR spectroscopy (PVA-co-PE)/(PSSA-co-PMA) membranes with 3 : 1 the molar ratio of PSSA to PMA showed higher ion exchange capacity (IEC), lower water uptake and higher proton conductivity than those with 1 : 1 molar ratio. As the PE concentration increased, the IEC values, water uptake and proton conductivities decreased continuously. These properties were elucidated in terms of competitive effect between the concentration of sulfonic acid, hydrophilicity and the crosslinked structure of membranes.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.36-45
• /
• 2019

The spent petroleum catalysts contain rare metals such as vanadium, nickel, molybdenum, and cobalt. Therefore, the leaching of these rare metals from spent petroleum catalysts by organic acid was investigated in the present study. The leaching efficiency of metals by organic acid was in the following order: oxalic acid > tartaric acid > citric acid > maleic acid > ascorbic acid. Among the organic acids employed in this work, oxalic acid can be considered to be superior to the other acids in terms of metals leaching efficiency. The effect of several leaching conditions such as temperature, acid concentration, pulp density, stirring speed, and reaction time on the leaching of metals was investigated. Vanadium and molybdenum were selectively dissolved by oxalic acid from the spent catalysts. The leaching kinetics of vanadium by oxalic acid was also investigated. An activation energy of 8.76 kJ/mol indicated that the leaching kinetics of vanadium by oxalic acid solution was controlled by mass transfer.