• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.109-113
• /
• 2009

Purpose: Materials for ear reconstruction are autogeneous cartilage and artificial implants. Despite their potential for donor site complications, autogeneous cartilage frameworks remain the accepted standard for external ear reconstruction. The purposes of this study were to investigate our ear reconstruction cases for 12 years. Methods: During twelve years from January 1996 to December 2008, 70 patients visited our hospital for ear reconstruction of microtia. Among them, 65 cases used autogenous cartilage frameworks, 3 cases used tissue expander and 2 cases used artificial implants. We investigated sex & age, common site, combined malformation, operation methods & their complications, donor site & their complications, anterior chest wall deformity and aesthetic evaluation. Results: Males were affected more often than females. Male to female ratio was 1.8 : 1. The common site of microtia was right ear (72%). And hemifacial microsomia was the most common associated congenital malformation. Surgical techniques included Tanzer-Ruecker method, Tissue-expander and Artificial framework ($Medpore^{(R)}$). Incidence of complication was higher with Tissue-expander & artificial framework than with Tanzer-Ruecker method. But There are few reports of using Tissue-expander & artificial framework and there was no acceptable statistical difference. And costal cartilage was harvested in ipsilateral side and anterior chest wall deformity reported only 2 cases under 10 year-old patients. Other minor complications reported such as, wound disruption and chest wall scar, but without any serious complications. Aesthetic result was evaluated by surgeons and patients for postoperative satisfaction and clinical evaluation. Conclusion: In ear reconstruction of microtia patient, delicate surgical strategy is important for natural shape and maintenance of postoperative contour. However, many methods were introduced for reconstrucion of microtia, the authors reconstructed an auricle in Tanzer-Ruecker method, Tissue-expander and Artificial famework ($Medpore^{(R)}$) for 70 patients. In our study, we generally chose Tanzer-Ruecker method and this treatment modality was satisfactory for patients and the postoperative result was acceptable for surgeons.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.361-367
• /
• 2011

The channel-forming discharge, which is a standard and single flow for the river maintenance and restoration project, should be estimated necessarily in the stable channel design. It is difficult to produce the specific pattern for the channel-forming discharge in the domestic rivers due to the insufficient researches and case studies. Also, it is improper to adopt the foreign cases for the domestic rivers and streams which have the high coefficients of river regime. Therefore, the channel-forming discharge possible to use for rivers with high coefficients of river regime is suggested in this study through analyzing the bankfull, specified recurrence interval, and effective discharges of Mangyeong River, Cheongmi Stream, and Hampyeong Stream for the abandoned channel restoration project. The bankfull discharge was calculated with geometric data using the HEC-RAS modeling and the flow, bed materials, and sediment data for the study reaches were used to estimate the specified recurrence interval and effective discharges. As a result for calculating the channel-forming discharge, the effective discharge was greater than the bankfull discharge in the river with high coefficient of river regime and the effective discharge was greater than the bankfull and there was no correlation between the coefficient of river regime and the characteristics of the specified recurrence interval discharges.

• Journal of the Korean Society of Food Culture
• /
• v.17 no.3
• /
• pp.315-328
• /
• 2002

The purpose of this study was to analyze the problems arising from the actual conditions of the Foodbank, and to implement the HACCP system as a solution in terms of increasing the safety of donated food within the Foodbank. In order to apply HACCP system, the entire Foodbank working process such as preparation, collection, transportation, division, and distribution was considered and analyzed to decide the application point for CCPs. Donated foods mainly consisted of processed foods, raw materials, lunch boxes, and cooked foods from mass catering establishments, which dominated over the others in terms of quantity. Cooked foods were divided into three groups based on menu-types and processing methods. Temperature, pH, and aw were measured on cooked foods, and Total Plate Count, Coliforms, E. coli, Salmonella spp., Staphylococcus aureus, Listeria monocytogenes, and E. coli O157:H7 were conducted in order to apply a HACCP plan. From these experiments, temperature, pH, and $a_w$ of donated food were likely contributed to microbial growth. Donated foods before HACCP implementation showed high numbers in terms of total plate count and Coliforms, both well over the acceptable standard levels. By setting the CCPs on maintenance of donated food below $10^{\circ}C$ and using a $75^{\circ}C$ reheating method, microbiological hazard levels were able to be controlled and lowered. From these results, it is concluded that in order to guarantee food safety, foods donated to the Foodbank must not only maintain a reasonable level of initial microbiological growth, but also must be handled properly through time and temperature controls within the Foodbank system. Furthermore, in terms of implementing the HACCP plan within the Foodbank management structure, basic food safety and sanitation measures, such as reheating facilities and various cold chain systems such as refrigerated vehicle for food transportation are importantly needed. The training and education of Foodbank personnel and management in areas such as awareness of hygiene and safe food handling and practice are also required and necessary.

• Journal of Acupuncture Research
• /
• v.32 no.2
• /
• pp.1-9
• /
• 2015

Objectives : The present study was an evaluation and standardization of herbal components in order to establish the efficacy and safety of Shinbaro pharmacopuncture. Methods : Among the raw materials of Shinbaro pharmacopuncture, the components Cibotii Rhizoma, Eucommiae Cortex, and Ledebouriellae Radix were assessed through ingredient verification experiments using thin-layer chromatography(TLC) and ultraviolet rays(UV) lamps. In addition, we standardized Acanthopanacis Cortex and Achyranthis Radix through validation using high performance liquid chromatograph-diode array detector(HPLC-DAD). Results : As result appeared a blue-white fluorescence under ultraviolet rays; changed to dark green after adding 1 % ferric chloride solution(due to Cibotii Rhizoma), and presented a yellow-green fluorescence when mixed with an ethyl ether under UV lamps by way of the ethyl ether layer, confirming Eucommiae Cortex. Ledebouriellae Radix was confirmed as dark brown spots at Rf values of 0.56 and 0.71 using TLC. Additionally, Acanthopanacis Cortex and Achyranthis Radix HPLC test results showed that linearity was $R^2{\geq}0.99$, and detection limit and quantitation limit were 0.23 to $1.29{\mu}g/mL$, and 0.71 to $3.90{\mu}g/mL$, respectively. Furthermore, precision and accuracy were confirmed to have relative standard deviation(RSD) values of 0.10 to 1.89 % and 96.19 to 103.72 %, respectively. Shinbaro pharmacopuncture did not have any overlapping or interference from other peaks in detection under the abovementioned analysis conditions. Conclusions : In conclusion, we confirmed that maintenance of Shinbaro pharmacopuncture validity was possible by means of quality control of Cibotii Rhizoma, Eucommiae Cortex, and Ledebouriellae Radix through ingredient identification and Acanthopanacis Cortex and Achyranthis Radix through high performance liquid chromatograph(HPLC) analysis. Further, we hope to contribute to the development strategy of herbal industry acupuncture.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.1
• /
• pp.95-103
• /
• 2019

Lips have a defect in maintenance of moisture due to their thin layer. As aging progresses, lips lose volume and redness, and become wrinkled. Fat grafting and filler surgery have been used to achieve attractive lips, but little research has been reported to develop better materials to replace the present methods. Recently, a study suggests that the increase of adipocyte number can be enhancing the expansion endogenous fat. In previous study, we identified that the efficacy of Magnolia officinalis bark extract (MOBE) was effective on the induction of adipogenic differentiation. In this study, we confirmed that MOBE enhanced the differentiation of human adipose-derived stem cells on the fat mimic 3D structure built by 3D bioprinting method From further experiments in human, we established a method to quantify the severity of lip wrinkle by measurement of standard deviation of gray value using Image J software. Finally, we found that topical treatment with 1% MOBE formulated lip balm significantly improved the lip wrinkle after using for 12 weeks. In conclusion, these findings suggest that MOBE has great potential, as a cosmetic ingredient, to reduce the lip wrinkle through the effect of promoting adipogenic differentiation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.281-290
• /
• 2021

Purpose. The aim of this study is to evaluate bone change around the implant in patients who underwent alveolar ridge preservation for implantation in the posterior teeth using radiographic data measuring changes of mesial, distal crestal bone level according to post-implantation, post-final prosthesis delivery and follow-up periods. Materials and methods. In total, 36 implants were placed in 32 patients. The mesial and distal crestal bone level of all the areas where alveolar ridge preservation was performed uses panoramic images taken post-implantation, post-final prosthesis delivery, and follow-up period each was measured and evaluated as a vertical value. The following factors were analyzed: associations between changes of crestal bone level and factors (e.g., age, sex, systemic diseases, dentist, implant location, tooth, bone type, membrane). The statistical analysis was performed using the mean, standard deviation and independent t-test, paired t-test (P < .05). Results. Analysis of crestal bone level differences between periods shows statistically significant differences (P < .05). There was no statistically significant difference when the changes of crestal bone level between post-implantation, post-final prosthesis delivery and follow-up periods were correlated with each factors. Conclusion. After alveolar ridge preservation, bone around the implant remained stable during the maintenance period without being affected by the patient and surgical factors, and alveolar ridge preservation is considered a clinically usable procedure.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.120-128
• /
• 2022

Printed circuit boards (PCBs) are a basic component in the electronics industry and are widely used in nearly all electronic products, such as mobile phones, tablet computers, and digital cameras, as well as in electric equipment. PCB manufacturing involves the use of many chemicals and chemical processes and therefore has more risks than other manufacturing sectors. This study aims to identify the causes of possible accidents during PCB manufacturing through risk assessment, develop and implement safety measures, and evaluate the effectiveness of these measures. Note that the safety measures developed to mitigate the risks of a certain process were also implemented for other similar processes. The risk assessments conducted over seven years, from 2015 to 2021, at a PCB manufacturing company identified 361 hazardous processes. Between 2016 and 2019, 41-56 hazardous processes were identified per year; such processes decreased to fewer than 20 per year after 2020. Application of the risk assessment results to the improvement of the hazardous processes with the similar characteristics seems to be effective in decreasing the risks. Equipment-related factors such as lack of appropriate maintenance, low work standards, and defective protection devices were responsible for 59.8% of all possible accidents. Because PCB manufacturing involves many chemicals, skin contact with hazardous substances, electric shock, fire, and explosion were the most common types of possible accidents (81.7%). In total, 505 safety measures were implemented, including 157 related to purchase and improvement of equipment and devices for safety (31.1%), 147 related to the installation/modification of fire prevention facilities (29.1%), and 69 related to the use of standard electrical appliances (13.7%). Risk assessment conducted after implementing the safety measures showed that these measures significantly decreased risk; 247 processes (68.4%) had a risk level of 3, corresponding to "very low," and 114 processes (31.6%) showed a risk level of 4, corresponding to "low." In particular, risk assessment of 104 processes with risk scores of 12 and 10 other processes with risk score of 16 showed that the risk decreased to 4 after implementing the safety measures. Thus, implementing these measures in similar manufacturing sectors that involve chemical processes can mitigate risk.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.2
• /
• pp.153-164
• /
• 2023

The objective of this study is to examine the removal rate of air pollutants, specifically sulfur oxides (SO_x) and nitrogen oxides(NO_x), using concrete permeable blocks containing zeolite beads coated with materials capable of eliminating these pollutants. Titanium dioxide(TiO₂) powder and coconut shell powder were utilized for the removal of SO_x and NO_x and were applied as coatings on the zeolite beads. Concrete permeable block specimens embedded with the coated zeolite beads were produced using an actual factory production line. Test results demonstrated that the concrete permeable block containing zeolite beads coated with coconut shell powder in the surface layer achieved SO_x and NO_x removal rates of 12.5% and 99%, respectively, exhibiting superior performance compared to other blocks. Additionally, the flexural strength and slip resistance were 5.3MPa and 65BPN or higher, respectively, satisfying the requirements specified in KS F 4419 and KS F 4561. Conversely, the permeability coefficient exhibited low permeability, with grades 2 and 3 before and after contaminant pollution, according to the standard for 'design, construction, and maintenance of pavement using permeable block'. In conclusion, incorporating zeolite beads coated with coconut shell powder in the surface layer enables simultaneous removal of SO_x and NO_x, irrespective of ultraviolet rays, while maintaining adequate flexural strength and slip resistance. However, the permeability is significantly reduced, necessitating further improvements.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.52-63
• /
• 2015

Business facilities among domestic architectures have rapidly been constructed along with domestic economic development. It is an important facility taking the second largest proportion next to apartment buildings among current 31 building types of fire department classification of 2012 year for urban architectures. The expected service life of business facilities is 15 years, but 70% of those in urban areas have surpassed the 15 year service life as of the present 2014. Thus, the demand for urgent rehabilitation of such facilities is constantly increasing due to the aging and performance deterioration of the facilities'main finishing materials. Especially, the business facilities are being used for the lease of company office or private office, and such problems as aging and performance deterioration of the facilities could cause less competitive edge for leasing and real estate value depreciation for the O&M (Operation & Management) agent and the owner, respectively. Therefore, an effective planned rehabilitation as a preventive measure according to the standardized repair rate by the number of years after the construction is in need in order to prevent the aging and performance deterioration of the facilities(La et al. 2001). Nonetheless, domestic repair/rehabilitation standards based on the repair rate are mainly limited to apartment buildings and pubic institutions, resulting in impractical application of such standards to business facilities. It has been investigated and analyzed that annual repair rate data for each finishing material are required for examination of the applicability of the repair rate standard for the purpose of establishment of a repair plan. Hence, this study aimed at developing a repair rate computation model for finishing materials of the facilities and verifying the appropriateness of the annual repair rate for each finishing material through a case study after collecting and analyzing the repair history data of six business facilities. The results of this study are expected to contribute to the planning and implementation of more efficient repair/rehabilitation budget by preventing the waste of unpredicted repair cost and opportunity cost for the sake of the business facilities' owners and O&M agents.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.495-502
• /
• 2020

Purpose: The aim of this study was to assess the effectiveness of domestically developed volar locking plate which has the concept of double-tiered subchondral support (DSS) in maintaining the reduction after distal radial fracture surgery. Materials and Methods: From July 2017 to December 2018, 54 patients were assessed. Plain radiographs were obtained immediately after surgery and at the last follow-up, and the radiographic parameters were measured in those images: radial length, radial inclination, volar tilt, ulnar variance, and distal dorsal cortical distance. The patients were subdivided into their age, type of fracture, and the position of the plate to evaluate the influence of each factors on the reduction maintenance. Results: Distal dorsal cortical distance in radiographs after the surgery was 5.91 mm (standard deviation, ±1.95 mm) on average. Significant differences in the radial length (p=0.038) and ulnar variance (p=0.001) were observed between immediately after surgery and at the last follow-up. When the parameters were evaluated by dividing the patients into subgroups according to the three specific factors, the ulnar variance showed a significant increase at the last follow-up when the patients were included 65-years-old or older. AO/OTA type C3 fracture, and Soong classification grade 0 plate position (p=0.007, p=0.012, p=0.046, respectively). Conclusion: Using the domestically developed DSS-type volar locking plate, significant reduction after distal radial fracture surgery could be maintained successfully. On the other hand, further study will be needed to determine about the reduction loss of the lunate facet identified in special cases that deal with fractures in elderly patients, unstable AO/OTA type C3 distal radial fractures, and Soong classification grade 0 plate position.