• Structural Monitoring and Maintenance
• /
• v.4 no.4
• /
• pp.365-379
• /
• 2017

This paper presents a comparison of the black-box and the physics based derived gray-box models for subspace identification for structures subjected to support-excitation. The study compares the damage detection capabilities of both these methods for linear time invariant (LTI) systems as well as linear time-varying (LTV) systems by extending the gray-box model for time-varying systems using short-time windows. The numerically simulated IASC-ASCE Phase-I benchmark building has been used to compare the two methods for different damage scenarios. The efficacy of the two methods for the identification of stiffness parameters has been studied in the presence of different levels of sensor noise to simulate on-field conditions. The proposed extension of the gray-box model for LTV systems has been shown to outperform the black-box model in capturing the variation in stiffness parameters for the benchmark building.

• IE interfaces
• /
• v.6 no.2
• /
• pp.37-51
• /
• 1993

This paper studies the economic replacement method for production facilities which requires huge investment but are necessary for higher productivity and competability of products. That is, the general models for the decision of economic life of properties which minimizes the total costs throughout the usage life(Life cycle costs) are generated. Main factors which make influences for the decision of econmic life can be divided by three. These are the change of salvage value, repair and maintenance costs, and availability of production facilities with the passage of usage time. In this paper, the real world data for these three factors are collected and analyzed for the extraction of representative standard forms with the passage of time. And general models for economic replacement methods and optimal usage terms are presented through tables with the combination of the standard forms of these three main factors.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.411-415
• /
• 2018

Nuclear fusion may be among the strongest sustainable ways to replace fossil fuels because it does not contribute to acid rain or global warming. In this context, activated cobalt materials in corrosion products for fusion energy are significant in determination of dose levels during maintenance after a coolant leak in a nuclear fusion reactor. Therefore, cross-section studies on cobalt material are very important for fusion reactor design. In this article, the excitation functions of some nuclear reaction channels induced by proton particles on $^{59}Co$ structural material were predicted using different models. The nuclear level densities were calculated using different choices of available level density models in ALICE/ASH code. Finally, the newly calculated cross sections for the investigated nuclear reactions are compared with the experimental values and TENDL data based on TALYS nuclear code.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.6_spc
• /
• pp.736-743
• /
• 2016

This study describes optimization methods for adjustment of helicopter main rotor tracking and balancing (RTB). RTB is a essential process for helicopter operation and maintenance. Linear and non-linear models were developed with past RTB test results for estimation of RTB adjustment. Then global and sequential optimization methods were applied to the each of models. Utilization of the individual optimization method with each model is hard to fulfill the RTB requirements because of different characteristics of each blade. Therefore an ensemble model was used to integrate every estimated adjustment result, and an adaptive method was also applied to adjustment values of the linear model to update for next estimations. The goal of this developed RTB adjustment optimization program is to achieve the requirements within 2 run. Additional tests for comparison of weight factor of the ensemble model are however necessary.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.477-486
• /
• 1995

This paper describes and constructs object-oriented analysis models using Galois-lattices that we are always studying in discrete mathematics, shows fundamental approaches to maintain the models, analyzes the construction of object-oriented analysis models through good examples. Also, we define several properties of Galois-lattices that have binary relations between class objects, propose the incremental updating algorithms that can update the Galois-lattice whenever new classes are added. This proposal shows that in case of adding new class nodes the results from simulations can implement in constant time and have linearly the incremental structures in worst cases, and in that the growth rate of lattices is proportioned to class nodes in time complexity. This results can achieve the high understandability of object-oriented analysis models and the high traceability of maintenance models. Furthermore it is possible to make more efficient performances of class reusability in advantages of object-oriented systems and support truly the class hierarchical maintenances.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.276-284
• /
• 2013

A stochastic expected cost model has been suggested by combining the nonlinear cumulative damage model with the expected cost model together which can be useful for doing the preventive optimal-maintenance of the armor units of rubble-mound breakwaters. The suggested model has been satisfactorily calibrated by comparison of the results from others models, also the sensitivity analysis has been carried out in detail under the variation of the associated parameters with the model. The optimal repair times can be directly evaluated by minimizing the expected cost rates that depend on the social importances, damage intensity functions and resistance limits. Finally, the present cost model has been straightforwardly applied to the armor units of rubble-mound breakwaters. Based on the assumption of turning the damaged structure back to the state as good as new after repairs, the required optimal repair times and magnitudes can be determined quantitatively in terms of the optimum balance between the costs and benefits on the preventive maintenance.

• Journal of Animal Science and Technology
• /
• v.60 no.4
• /
• pp.7.1-7.5
• /
• 2018

Background: Mice are widely accepted research models of great clinical significance. Maintenance of laboratory mice breed is an essential aspect for performing research activities in various fields of science. Infanticide is one of the prominent causes of litter loss during maintenance of laboratory mice stock. The present study is an effort to monitor the effect of change in ambient temperature of female mice below the normal range on cannibalism and infanticide during early postparturition phase. Adult female Swiss albino mice have been divided into two groups of control and treatment. On the day of litter group one was maintained under controlled temperature conditions (minimum $20^{\circ}C$ to maximum $23^{\circ}C$) throughout, while female mice belong to group two have been exposed to variation of room temperature (maximum $15^{\circ}C$ to minimum $10^{\circ}C$ for two nights and one day) until 36 h postparturition. Results: The effects of temperature changes were observed on the infanticide behaviour of dams along with the survival of pups in early postparturition phase till 36 h after delivery. The significant statistical difference (P < 0.05) was reported in infanticide behaviour of dams when control and treatment group was compared. It is observed that decrement in surrounding temperature promotes decrement in the ambient body temperature of dams during early postparturition. It is proposed that alteration of hypothalamic homeostasis due to temperature change induces cannibalism and infanticide behaviour. Lack of thermoregulation during early postparturition creates the sense of insecurity, in-satiety, anxiety and stress. Conclusions: Authors strongly recommend the maintenance of body and surrounding temperature to prevent infanticidal behaviour and cannibalism within Swiss albino mice population. Further investigations are advisable to authenticate the active behavioural and biochemical pathway behind the phenomena.

• KIEAE Journal
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2011

Building deterioration would be proceeded by various causes such as physical, social, economic degradation. The deterioration would be inevitably prevented or delayed to get the decent function and performance in various building part and components. The maintenance and management are continued to provide the decent living condition for the household. The maintenance means mainly a repair, including the on-time and longterm plan. The longterm repair would be conducted by the systemic preparation in management activity and a required cost. Therefore, the annual due for the longterm repair plan is important to prepare the repair cost in a required time. In this paper, it aimed at analyzing the longterm repair cost and modelling to forecast the required cost in total area, number of household and time elapse in apartment housing. The estimation model of a repair cost is used with a power function which has a good statistics. Results of this study are shown that the sample has a longterm repair due in a $2,032won/m^2{\cdot}yr$ averagely which is higher than $912won/m^2{\cdot}yr$ in domestic. Second, the longterm repair due is proportionally correlated with the time elapse in both a total area and the number of household. Third, the estimation model for the longterm repair amount is suitable for the power function which is most in any other estimation models. Fourth, the ration of the longterm plan repair due a year to the cumulated longterm amount is about 26%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.101-111
• /
• 2013

In this study, DEA (Data Envelopment Analysis) was carried out on the four bridges, which have the same extension (L=1,615m), in order to select the most superior, economical method of construction using the LCC concept of each bridge structure in the case of the Ulsan-Pohang double track railway which is scheduled to be constructed. DEA models were analyzed with the CCR model, which was designed for the evaluation of relative efficiency of each model. The initial construction costs, maintenance costs, indirect costs (user costs + indirect loss of social costs), and life cycle costs were used as input variables, and average duration was applied as the output variable. LCC was applied to calculate the input variables, and to get the costs of LCC, 100 years of period and 4.83% of real discount rate were applied, and the costs are classified into initial construction, maintenance, user, and indirect loss of social cost. The analysis results showed that the Method 2 and 3 were evaluated as the most efficient, and the other alternatives were evaluated as the following order; Method 1, the default, and Method 4.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.93-94
• /
• 2021

The Korean government has invested a tremendous amount of money in the last 10 years to build large public research infrastructures (LPRI). For efficient operation and maintenance of LPRI built with expensive equipment and professional engineers, reasonable budget needs to be allocated. However, it is difficult to fulfill sustainable operation and maintenance (O&M) because there is no standard on budgeting for efficient LPRI operation, including expensive equipment and manpower allocation. There have been a lot of cost assessment studies regarding O&M of high-demand facilities such as hospitals, hotels and residential buildings, but a very few on sustainable O&M of LPRI. Therefore, mid/long-term budget establishment plans for efficient LPRI O&M are required from the initial planning stage and a cost assessment model to support the plans should be developed. The objective of this paper is to propose a cost assessment model for sustainable operation and maintenance of large public research infrastructures. To do so, actual O&M data of 6 LPRI types in operation are collected, and regression analysis model (RAM) is used for development and evaluation a cost assessment model. The study result will support sustainable operation of LPRI from a business perspective and be used as basic data for continuous development of cost assessment models to establish budgets for LPRI operation from an academic perspective.