• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.293-305
• /
• 2015

In this paper, we suggest the conceptual design of a water-cooled reactor system for a low-pressure inherent heat sink nuclear desalination plant (LIND) that applies the safety-related design concepts of high temperature gas-cooled reactors to a water-cooled reactor for inherent and passive safety features. Through a scoping analysis, we found that the current LIND design satisfied several essential thermal-hydraulic and neutronic design requirements. In a thermal-hydraulic analysis using an analytical method based on the Wooton-Epstein correlation, we checked the possibility of safely removing decay heat through the steel containment even if all the active safety systems failed. In a neutronic analysis using the Monte Carlo N-particle transport code, we estimated a cycle length of approximately 6 years under 200 $MW_{th}$ and 4.5% enrichment. The very long cycle length and simple safety features minimize the burdens from the operation, maintenance, and spent-fuel management, with a positive impact on the economic feasibility. Finally, because a nuclear reactor should not be directly coupled to a desalination system to prevent the leakage of radioactive material into the desalinated water, three types of intermediate systems were studied: a steam producing system, a hot water system, and an organic Rankine cycle system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.47-57
• /
• 2007

Real-time oceanographic information system was developed using platforms of aquaculture farms to examine causes of mass mortality of hatchery fishes, and to reduce the damage of mass mortality which has been occurred frequently off coast by abnormal change of ocean conditions. The system had the advantages of direct data distribution to fishermen at the farm and instant maintenance of equipments due to easy access to the farms and residents at the farms in comparison with offshore mooring buoy system. To avoid discontinued measurement of the system, repairs caused by malfunction of equipments, bimonthly preventive maintenances and daily monitoring of measured data were systematized. Confidence intervals calculated by a statistical method using accumulated data were applied to data management. Such activities could minimize discontinuance of measurement and keep information more trustful. In addition, the system has various ways of data distribution. Through homepage and e-mail in the internet, information was provided to public. Display units which were connected to equipments at the farm gave the measured data directly to fishermen, which guided them to run their farm scientifically. Finally large display unit was installed at a fish market and showed the measured data at the nearest station with tide and weather information. Proper region for aquaculture and wintering region were studied using temperature data obtained by the system in 2006. The system will contribute to reduce economic damage of coastal fishery and to understand coastal marine environment.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.73-96
• /
• 2013

ICAO's Universal Safety Oversight Audit Programme (USOAP) was initially launched in January 1995, in response to widespread concerns about the adequacy of aviation safety oversight around the world. The recent reduction in aircraft accidents and effective role that is evaluated on the basis of these results, and in 2013 the existing 'snapshot approach' to 'regular monitoring system (USOAP-Continuous Monitoring Approach)' was converted to. ICAO aviation safety assessment of the state in today's international community 'aviation safety credibility' as objective indicators to judge the enormous impact on the aviation industry, the state is not satisfactory, especially if the results of the evaluation and expansion of code-share airline ban, reduced international air transit passengers, including premium increases business and economic penalties should. In addition, ICAO implementation of the existing laws and regulations(Prescriptive Approach), but based on the Risk-based prevention model, Proactive Approach introduced the concept of aviation safety system, including international aviation safety policy has been to switch paradigms. This new ICAO international aviation safety policy also applies to the Government of the Republic of Korea in line with the aviation safey policies have changed. In particular, the systematic implementation of safety management for the existing laws and regulations in the center of the safety oversight system of risk-based introduction of the concept of proactive safety management, and According to international standards ICAO aviation service providers operate their own Safety Management System was set out in Aviation Law ever. In addition, the aviation safety is at the center of the field of the safety of aircraft operations and maintenance for the promotion is promoting various safety policies. This new paradigm shift in the international aviation safety policy in line with our state in the international community with the most exemplary aviation safety system firmly established itself as a model, the Government will strengthen the competitiveness of our aviation plans to support. To do this, the government, airlines, aviation officials try all the practical effect would be expected.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.127-139
• /
• 2012

This study aims to figure out the main agent of management in the 69 recently constructed neighborhood parks in Busan, and to analyze the present status of the main agents. For this purpose, the work resources on park and landscape management, interview to related staff, and the budget on urban parks were found as the main agents of management. In case the parks were managed by consignment or by other separate organization, this study collected resources through the homepage or personal visits. As a result for the management method on parks, about 48 parks(69.6%) were under direct management by the local governments' main office and its business offices. Eighteen parks(26.1%) were commissioned to corporation or private organizations and three parks(4.3%) were operated by both direct and commissioned management. Because of the overall management result on urban parks, the company under outsourced management is not sufficient for a comprehensive management. Such is mainly focused on the maintenance like landscape or cleaning, but have fewer programs for the users. Forty-six parks cared by the local governments are mainly small sized neighborhood parks. For the management, contract workers or short-term workers are hired. It demonstrates an urgent need to improve professional personnel and organizational system for park management. In addition, any educational or cultural facility in the park is managed by separate institutions. Thus, it is not controlled as a park facility but an independent facility with separate controls. Moreover, to solve such problems, it needs legalization on the proper employment for parks, institutional improvement, cooperative network with NGO, planning and development of the program used according to the change of time, and customer oriented program management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.587-598
• /
• 2012

Successful implementation of infrastructure asset management system can be started with rich and reliable data. However, measurement errors in the data have always existed in the real world caused for many unknown reasons. It disturbs maintenance activities of agencies, and makes negative effects to reliability of research results on forecasting deterioration process and life cycle cost. Above all, it makes a contradiction that road agencies cannot believe their inspection data surveyed by their hands. It is particularly serious in the road pavement management field. Although road agencies are well recognized the fact, inspecting without measurement error would be a great challenge. Considering the facts, this paper aimed to suggest statistical error processing methods to correct latent error included in pavement surface inspection data. As alternatives, this paper suggested two methods based on probability distribution to consider structure of error and reliability of the data. The suggested methods were empirically tested by using pavement inspection data from Korean National Highway. As the result, this paper confirmed that conventional error processing that just removes only visible errors is not enough to cover uncertainty in pavement deterioration process. The suggested methods would be useful for improving reliability of analysis results required for road infrastructure asset management.

• Korean Security Journal
• /
• no.13
• /
• pp.403-422
• /
• 2007

When people think about stress, they usually consider it as negative. However, stress can be both positive and negative. Positive stress is referred to as eustress, while negative stress is called distress. Stress is derived from the change which can be either positive or negative. Change is an inevitable aspect of life; therefore, people cannot avoid stress. Police works create a lot of stress among officers because of job characteristics. Police works require both physical and emotional strains. These strains lead to stress of officers. Danger, frustration, excessive paperwork, the daily demands of the job, and a lack of understanding from family members, friends, and the public are major causes of stress among police officers. The American Institute of Stress in New York ranks police job among the top ten stress-producing jobs in the United States. In this study, the author proposes the ways of stress management among police officers based on the medical model and the organizational health model. In the medical model, the author introduces the elimination, coping, and counseling as a way of dealing stress as an individual level. In the organizational health model, the author proposes following recommendations from the administrative point of view: 1) rationalization of personnel management system, 2) improvement of the welfare, 3) democratic management of police organization, 4) maintenance of a good partnership with citizens, and 5) development of stress management program for police family members.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• Journal of Navigation and Port Research
• /
• v.46 no.1
• /
• pp.1-10
• /
• 2022

This study aims to investigate changes in the demand for ship officers in response to changes in the shipping industry environment in which Maritime Autonomous Surface Ships (MASS) emerge according to the application of the fourth industrial revolution technology to ships, and it looks into changes in the skill of ship officer. It also analyzes and proposes a plan for nurturing ship officers accordingly. As a result of the degree of recognition and AHP analysis, this study suggests that a new training system is required because the current training and education system may cover the job competencies of emergency response, caution and danger navigation, general sailing, cargo handling, seaworthiness maintenance, emergency response, and ship maintenance and management, but tasks such as remote control, monitoring diagnosis, device management capability, and big data analysis require competency for unmanned and shore-based control. By evaluating the importance of change factors in the duties of ship officers in Maritime Autonomous Surface Ships, this study provides information on ship officer educational institutions' response strategies for nurturing ship officers and prioritization of resource allocation, etc. The importance of these factors was compared and evaluated to suggest changes in the duties of ship officers and methods of nurturing ship officers according to the introduction of Maritime Autonomous Surface Ships. It is expected that the findings of this study will be meaningful as it systematically derives the duties and competency factors of ship officers of Maritime Autonomous Surface Ships from a practical point of view and analyzed the perception level of each relevant expert to diagnose expert-level responses to the introduction of Maritime Autonomous Surface Ships.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.3
• /
• pp.777-822
• /
• 2013

This study attempts to elicit the organizational strategy and operational elements of community-based agricultural management bodies as new main farm management. We analyzed the newest discussion trend, cooperated community management, between Republic of Korea and Japan based on theory of organizing regional agriculture, and also researched on the organization management and business management about cooperated management of community. In this study, the main conclusion of the organizational strategy and operational elements of community-based agricultural management bodies are as following. i) The community-based agricultural management bodies is the cooperation managed individual agriculture resources as joint stock for purposing compound goal, an expansion agricultural income, maintenance farm productivity and rural societies. ii) The domain of cooperative management focus on secondary and tertiary industry like food process, farm produce distribution, rural experience more than farm produce production. The study suggest business promotion system of village unit farmers groups, element of organization management as executive decision organization, business management, operating factor for each steps and management element of cooperation farm working. iii) The policy direction for invigoration community-based agricultural management bodies is to make facilitation for each steps instead of standardized support.

• Korean Security Journal
• /
• no.12
• /
• pp.309-333
• /
• 2006

These days, the majority of public service area presents increment of utilizing a contracting-out with the following reasons such as cost-efficiency, maintenance of population changes in flexible manner, and convenience of management. The social changes have influence on policing structure and regional security system as well as problems associated with accepting the contracting-out in the public policing sector. However, many issues such as limited contracting-out sector, difficulty of encouragement of participation to private sector, and limitation of making a contract with contracting-out would be brought up when initiate contracting-out to the public policing sector. Changing security system to lower budget, planning restructure of organization, developing alterable partial contracting-out, establishing private and public cooperate system and rationalizing contract system are the suggestions to solve and modify the raising problems. This study suggests a differentiate regulation of policing services compare to currently existing contracting-out method to consider a distinctive working environment. The suggestions are as follows: 1. develop a security segregate model, 2. build a cooperative system between private and public policing sector, 3. broaden opportunity of participation of private policing sector, 4. open-competition among qualified private tender to make a contract. The private contracting-out in the public security service sector should be manage in different manner compare to other private contracting-out in government-oriented public service sector. Since work performance of each private contracting-out agency is strongly bond to safety of every civilian in the nation, it is essential to increase its standard of qualification of each agency.