• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.157-165
• /
• 2017

Being a staple food for more than half of the population of the world and South Korea, rice is an important crop. For the past 20 years, global paddy rice cultivation area and production have shown an annual growth of 0.46% and 1.61%, respectively. Global rice consumption for food and processing has increased by 1.37% and 3.68%, respectively. Due to the main reason for such increasing human population, it is expected that from 439 million tons in 2010, additional 116 million tons will be needed in 2035. Global rice imports and exports have doubled in the last 20 years. However, in spite of such increment, global rice exports in 2013 were 8.4% of the total production. It is thought that rice protection policies in the producing countries are the main reason for such small scale of rice trading. In the past 5 years, India recorded the largest growth rate in rice exports (51.4%), whereas China showed the largest growth rate in imports (61.0%). For global utilization of milled rice during the same period, approximately 79.4% was used as food, 7.2% as animal feeds, and 1.4% for processing. Regionally, Asia has shown a similar pattern to the global rice usage, whereas utilization for processing in America, for food in Africa, and for animal feed in Europe was relatively higher than the global rice usage. Korea's cultivation area and production since the last 5 years, are 0.5% and 0.8% of those of the world, respectively. Its annual rice export is approximately 3,000 tons, which is 0.01% of the global rice export. Korea's rice utilization is high for food and low for feed and for processing relative to global rice utilization. Therefore, a review must be conducted to increase Korea's utilization of rice for processing and for feed production.

• Computers and Concrete
• /
• v.15 no.5
• /
• pp.833-845
• /
• 2015

In the world total boron reserve rating, Turkey is taken place on the first rank, meeting the demand of refined mineral and main boron chemicals. Development of the new boron products and production technologies, spreading the using area of the boron are the study topics which must be finically discussed. In this study, with the help of colemanite taken in ratio as (0%, 7.5%, 12.5%, and 17.5%) by being mixed by the cement, surfaces of the pumice aggregates have been covered. Permeability of the samples has been investigated by producing lightweight concrete with 400 dose with the help of aggregates covered with colemanite. For this, the experiments of water absorption, capillary water absorption, depth of penetration of water under pressure and rapid chloride permeability have been performed. In addition, analyses of the thin section of covered and uncovered pumice aggregates and SEM (Scanning Electron Microscope) have been investigated. When the control samples produced with the covered aggregates and concretes produced with colemanite covered aggregates are compared each other, it has been determined that special lightweight concretes whose values of capillary water absorption experiment, depth of penetration of water under pressure experiment and rapid chloride permeability are low can be produced.

• Spatial Information Research
• /
• v.6 no.1
• /
• pp.103-120
• /
• 1998

"The Plan for the Development of the National Geographic Information System" designates the following six major thematic maps as the main subject of digital mapping project: topographic-cadastral maps; administrative boundary maps; land use maps; road network maps; national land zoning maps; and urban planning maps. Carrying out the digital mapping project requires standards and guidelines for digitizing process. However, there is neither standards nor guidelines with regard to thematic map production. This study describes the steps involved in producing thematic maps and provides the best procedural alternative for the production of thematic maps. Based on procedural alternative suggested by this study, actual digital maps have been experimentally produced for the selected area, Anyang-Si Dongan-Gu. The results of this experimental work have been utilized to government for not only making the guidelines but also initiating plans for the development of thematic map production.roduction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.18-26
• /
• 2004

This study evaluated the impact of an AI heifer calf rearing scheme on dairy stock development, in a coconut grazing and a peri-urban smallholder dairy production system in the Western Province of Sri Lanka. The heifer rearing scheme included free advice on calf rearing, drugs, acaricides, minerals and subsidised concentrates for 30 months. The farmers in the coconut growing area integrate dairying with their plantation, they sell their milk to the main processors. The peri-urban farmers are intensive milk producers, who sell their milk at informal markets. To estimate the effect of the heifer rearing scheme on dairy replacement stock development, scheme farmers were compared with farmers who did not participate in the scheme. Calf mortality was twice as high in non-scheme farms (23-28%) as in scheme farms (12-14%). The scheme had a positive effect on weight development and scheme heifers calved 4.5 months earlier than non-scheme heifers. The calf rearing package is cost effective in both farming systems, however, the required cash inputs are a major constraint. The costs per in-calf heifer under the scheme are much lower than the production of such animals by either multiplication in state farms or importing them. The coconut grazing system showed the highest potential for producing surplus dairy stock.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.637-641
• /
• 2007

Airborne LIDAR (Light Detection and Ranging) technology has reached a degree of the required accuracy in mapping professions, and advanced LIDAR systems are becoming increasingly common in the various fields of application. LiDAR data constitute an excellent source of information for reconstructing the Earth's surface due to capability of rapid and dense 3D spatial data acquisition with high accuracy. However, organizing the LIDAR data and extracting information from the data are difficult tasks because LIDAR data are composed of randomly distributed point clouds and do not provide sufficient semantic information. The main reason for this difficulty in processing LIDAR data is that the data provide only irregularly spaced point coordinates without topological and relational information among the points. This study introduces an efficient and robust method for automatic extraction of building footprints using airborne LIDAR data. The proposed method separates ground and non-ground data based on the histogram analysis and then rearranges the building boundary points using convex hull algorithm to extract building footprints. The method was implemented to LIDAR data of the heavily built-up area. Experimental results showed the feasibility and efficiency of the proposed method for automatic producing building layers of the large scale digital maps and 3D building reconstruction.

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.107-114
• /
• 2012

This is a study that surveyed and analyzed the present status of producing loess construction materials in Korea from 2006 to 2011. The findings are as follows. 1) More than 70% of loess construction material manufacturers are distributed in the capital area. Chungcheong-do and Gyeonggi-do are grown by about 20% on the annual average. 2) Shape of loess brick is possessed mostly by a rectangular parallelepiped. A hole shape, which has 1~5 holes among these things, is possessing a majority. 3) It was indicated to be 42 days as material age for the compressive strength, to be about 2.7Mpa for both extrusion and compression, and to be about 30% for absorptance. 4) Among the whole loess material manufacturers, it accounts for 87 for loess brick 66% for loess mortar and more than 39% for loess paint, but within 10%~15% for other loess products. 5) The main specifications of loess brick are $300{\times}150{\times}150,\;300{\times}150{\times}100,\;300{\times}200{\times}150,\;300{\times}150{\times}200$ in order of the output of 74kinds of loess bricks. 6) In order to improve the strength of building materials, mortar and concrete used loess, it is necessary to examine closely about the effect of ceramic binder and cement on loess products.

• The Plant Pathology Journal
• /
• v.35 no.1
• /
• pp.32-40
• /
• 2019

Symptoms of fig mosaic disease have been noticed on leaves of fig (Ficus carica) for several decades, in Montenegro. In 2014, leaf samples were collected from trees of six fig cultivars in a plantation located in the main fig-producing area of Montenegro, to study the disease. After RNA isolation, samples were tested by RT-PCR for detection of nine fig viruses and three viroids. Four viruses were detected: fig leaf mottle-associated virus 1 (FLMaV-1), fig mosaic virus (FMV), fig mild mottle-associated-virus (FMMaV) and fig badnavirus 1 (FBV-1). Most of the viruses were present in mixed infections. The amplicons of the viruses were directly sequenced from both directions. A BLAST search of these sequences revealed sequence identities with their closest counterparts at GenBank of 92, 97, 92 and 100%, for FLMaV-1, FMV, FMMaV and FBV-1, respectively. Different responses in symptom expression due to the various virus combinations detected have been demonstrated. Variety $Su{\check{s}}ilica$ had the least symptom expression, with only one virus (FBV-1) found. Considering that the production of figs in Montenegro is increasing and has a substantial relevance in this geographic location, the results indicate that more attention should be given to improving the phytosanitary condition of fig trees in the country.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.14-20
• /
• 2022

In this study, the catalytic reaction characteristics for producing hydrogen using methanol steam reforming were investigated. Nickel and copper are frequently used in steam reforming reaction and methanol synthesis, were used as main active metals. As a support, hydrotalcite has a high specific surface area, excellent porosity and thermal stability, and has weak Lewis acid sites and basic properties. Hydrotalcite was used to identify catalysts of methanol steam reforming with catalytic activity and their properties. In this research, high reactivity was shown in the catalyst of copper metal with high reducibility. And increasing of active metal loading showed the higher the methanol conversion and hydrogen selectivity.

• Research in Plant Disease
• /
• v.22 no.4
• /
• pp.249-256
• /
• 2016

To investigate the incidence of plant-parasitic nematodes from plastic-house fields of strawberry, 170 soil samples were collected from the main producing area of strawberry in Korea from 2014 to 2015. Based on the investigation, root-lesion nematode (RLN; Pratylenchus spp.) and root-knot nematode (RKN; Meloidogyne spp.) are the most important pests in plastic-house fields of strawberry with 57% and 36% incidences, respectively. Among the collected fields, 96 and 63 fields were infected RNL and RKN, respectively with 44 fields (38.8%) being detected at both nematode. High degree of incidence of both nematodes were observed in the regions of Jinju, Gyeonnam Province, Korea. For identification of species level, phylogenetic and distance analysis were performed using RLN and RKN isolates generated from the regions of Jinju. The results indicated that the RLN and RKN isolates were Pratylenchus vulnus and Meloidogyne hapla, respectively. This study showed that P. vulnus and M. hapla could be most dominant species in plastic-house fields of strawberry. This data will provide basic knowledge for development of effective control strategies.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.116-121
• /
• 2016

The amount of carbon dioxide ($CO_2$) released while producing building materials is substantial and has been targeted as a leading contributor to global climate change. One of the most typical methods of reducing $CO_2$ in building materials is the addition of slag and fly ash, like pozzolan material another method is to reduce $CO_2$ production by developing carbon negative cement. MgO-based cement from the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. It is also believed that adding reactive MgO to Portland-pozzolan cements can improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, basic research on magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as the main starting materials, as well as blast furnace slag for the mineral admixture, was carried out for industrial waste material recycling. In order to increase the overall hydration activity, $MgCl_2$ was also added. In the case of the addition of $MgCl_2$as accelerating admixture, there was a promoting effect on the compressive strength. This was found to be due to the production of needle-like dense Mg-Cl hydrates. Mgnesia cement has a high viscosity due to its high specific surface area therefore, when the PC-based dispersing agent was added at a level of more than 1.0%, it had the effect of improving fluidity. In particular, the addition of $MgCl_2$ in magnesia cement using $MgCO_3$and magnesium silicate ore (serpentine) as main starting materials led to a lower expansion ratio and an increase in the freeze-thaw resistance finally, the addition of $MgCl_2$ as accelerating admixture led to good overall durability.