• Fire Science and Engineering
• /
• v.25 no.4
• /
• pp.89-93
• /
• 2011

It is not recommended that elevator use for egress at (super) high rise buildings because elevator shaft main roles to spread of fire smoke. But in North America used to protect this area by elevator shaft pressurization. These tests are performed at high rise apartment to verify that elevator shaft pressurization can protect to spread of fire smoke or not. and verify to used for egress at fire. Pressurization at elevator shaft make pressure difference of 50 Pa all floor at 150 CMM because this method have low friction loss from air flow. Also when dwelling door and elevator door are opened that critical velocity is performed to protect of back-layering from fire room for escape routs by 180 CMM. Therefore through out these pressurization tests by elevator shaft are estimated to have less overpressure because supply air difference are low between to satisfy critical velocity at one door opened and maintain to pressure difference all doors closed. Finally we verified that disable or residual people can use elevator for egress at fire by elevator shaft pressurization.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.203-209
• /
• 2018

Background: Night shift work is associated with many problems such as sleep deprivation, sleepiness, decreased cognitive performance, increased human errors, and fatigue. This study set out to measure cognitive performance, melatonin rhythms, and sleep after different consecutive night shifts (7 vs. 4) among control room operators (CORs). Methods: The participants included 60 CORs with a mean age of 30.2 years (standard deviation, 2.0) from a petrochemical complex located in Southern Iran. Cognitive performance was assessed using the n-back task and continuous performance test. To evaluate melatonin, saliva was collected and tested by enzyme-linked immunosorbent assay. To assess sleep and sleepiness, the Pittsburgh Sleep Quality Index and Karolinska Sleepiness Scale were used, respectively. Results: Individuals who worked 7 consecutive night shifts had a significantly better cognitive performance and sleep quality than those who worked 4 consecutive night shifts. However, salivary melatonin profile and sleepiness trend were not affected by shift type. Conclusion: The main duty of CORs working night shifts at the studied industry included managing safety-critical processes through complex displays; a responsibility that demands good cognitive performance and alertness. It is suggested that an appropriate number of consecutive night shifts in a rotating shift system should be planned with the ultimate aim of improving CROs performance/alertness and enhancing safety.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.6
• /
• pp.558-562
• /
• 1986

The purpose of this study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by using marbled sole, Limanda yokohamae (Gunther). An experimental tank ($360L{\times}50W{\times}55H\;cm$) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the experiment water depth was maintained 50 cm level in the tank. The tank was marked into six longitudinal sections each being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 40 times every 30 seconds, and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was 1.9 lux ($1.2{\sim}2.9\;lux$) in the daytime and 0.7 lux ($0.5{\sim}1.1\;lux$) at night. The variation of the gathering rate of fish in illumination time was small and comparatively fluctuated with stability.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.75-86
• /
• 2011

This paper describes several current research activities and the field techniques for the prevention of human errors during the operation of nuclear power plants(NPPs). The human aspects such as 'fitness for the duties', 'job competence and suitability', 'types of communication', 'behaviors of field workers', 'teamwork of main control room crews', 'task procedures', etc. have been investigated for improving the performance of operating personnel in NPPs. We decide to develop a set of the complementary techniques for the reduction of human errors. The set of techniques developed includes teamwork criteria, jobs fitness analysis, procedure enhancement guide, 3-way communication, campaign posters, a behavior based safety program, a procedure guideline, and a task hazard identification method for the field practitioners in NPPs. These can offer a set of significant human error countermeasures to be considered for analyzing and reducing human error in NPPs as well as other fields of industry.

• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.47-53
• /
• 2014

The application of advanced Main Control Room(MCR) is accompanied with lots of changes and different forms and features through the virtue of new digital technologies. The characteristics of these digital technologies and devices give many opportunities to the interface management, and can be integrated into a compact single workstation in advanced MCR so that workers can operate the plant with minimum physical burden under any operation conditions. However, these devices may introduce new types of human errors and thus a means to evaluate and prevent such errors is needed, especially those related to characteristics of digital devices. This paper reviewed the new type of human error hazards of tasks based on digital devices and surveyed researches on physiological assessment related to human error. An experiment was performed to verify human error hazards by physiological responses such as EEG which was measured to evaluate the cognitive workload of operators. And also, the performances of four tasks which are representative in human error hazard tasks based on digital devices were compared. Response time, ${\beta}$ power spectrum rate of each task by EEG, and mental workload by NASA-TLX were evaluated. In the results of the experiment, the rate of the ${\beta}$ power was increased in the task 1 and task 4 which are searching and navigating task and memory task of hierarchical information, respectively. In case of the mental workload, in most of evaluation items, task 1 and 4 were highly rated comparatively. In this paper, human error hazards might be identified by highly cognitive workload. Conclusively, it was concluded that the predictive method which is utilized in this paper and an experimental verification can be used to ensure the safety when applying the digital devices in Nuclear Power Plants (NPPs).

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.9
• /
• pp.165-172
• /
• 2010

Communication problems have been regarded as one of the biggest causes in trouble in many industries. This led to extensive research on communication as a part of human error analysis. The results of existing researches have revealed that maintaining a good quality of communication is essential to secure the safety of a large and complex process system. In this paper, we suggested a method to measure the quality of communication during off-normal situation in main control room of nuclear power plants. It evaluates the cosine similarity that is a measure of sentence similarity between two operators by finding the cosine of the angle between them. To check the applicability of the method to evaluate communication quality, we compared the result of communication quality analysis with the result of operation performance that was performed by operators under simulated environment.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.136-143
• /
• 2018

In this study, we conducted a pilot study on the multiple spurious operations (MSO) analysis in the fire probabilistic safety assessment (PSA) of domestic nuclear power plant (NPP) to identify the degree of influence of the operator actions used in the MSO mitigation strategies. The MSO scenario of the domestic reference NPP selected for this study is refueling water tank (RWT) drain down event. It could be caused by spurious operations of the containment spray system (CSS) of the reference NPP. The RWT drain down event can be stopped by the main control room (MCR) operator actions for stopping the operation of CSS pump or closing the CSS motor operated valve if the containment spray actuation signal (CSAS) is spuriously actuated. Outside the MCR, it can be stopped by operator actions for closing the CSS manual valves or motor operated valve or stopping the operation of CSS pump. The quantification result of a fire PSA model that takes into account all recovery actions for the RWT drain down event lead to risk reduction by about 95%, compared with quantification result of fire PSA model without considering them. Among the various operator actions, the recovery action for the spurious CSAS operations and the operator action for the manual valve are identified as the most important operator actions. This study quantitatively showed the extent to which the operator actions used as MSO countermeasures have affected the fire PSA quantification results. In addition, we can see the rank of importance among the operator recovery actions in quantitative terms.

• Korean Journal of Health Education and Promotion
• /
• v.1 no.1
• /
• pp.83-97
• /
• 1983

The present study is to provide information for the improvement of school health services through research on the current condition of its organization and practice in universities, colleges and junior colleges. The scope of this study is consisted of four components including health organizations/units, school health services, environmental sanitation and health education for the 30 universities, the 20 colleges and the 32 junior colleges in Korea. The major findings are summarized as follows: (1) Among the sampled schools, around 73% of them have the health service organization/unit. When we break down health service organization/unit into the types by the level of school, around 73% of the universities have formal organization called "health center" and 20.0% of them have an informal organization called "health room". For the colleges level, 30.0% of them have the "health center" and 40.0% of them have the "health room". The figure of junior colleges is a quite different from universities and colleges, 56.3% of junior colleges have the "health room" only but the other have no service organization at all. (2) It was found that only 22.0% of 82 schools have the health committee for the school health services. It might be necessary to have a kind of expert committee to establish an annual health service program, budget and health policy in the school. (3) Approximately 29% of those schools having formal health organizations/units appointed directors as a medical persons. 13.4% of the sampled schools are appointed doctors (including the dentists) at health service organization/unit, 9.8% are appointed pharmacist and 65.9% are appointed nurses. Therefore, the data imply that the school health services are depending mainly on nurses. (4) The major activities of school health services are covering primary medical care (84.1%), health counseling (72.0%), physical examination (68.3%), vaccination (58.5%), tuberculosis control (54.9%), parasite control (29.3%) and dental health case(9.8%). Also 69.5% of the schools have the program on the environmental sanitation and the health education program. (5) In regard to health budget taking account of 34 schools, approximately 92% of them have less than 5,000 won per students and only 8.8% of them have more 10,000 won per students. At the average health budget per students is 4089.8 won in universities, 1617.1 won in colleges and 475.0 won in junior colleges. (6) The students enjoy the benifit of medical insurance at 11.0% of 82 schools surveyed. They are all universities. (7) The study found that 56 universities, colleges and junior colleges provide the annual physical examination. Only 21.4% of them have provided it for all students and school employees. (8) 64.3% of the 56 schools surveyed keep a record of the regular physical examinations. Records must be utilized as the basic data for the evaluation of the student's health condition and so the individual student is encouraged to take care of his own health. (9) At the 59 schools which practice health counseling, the main concerns of the counsellees are venereal disease, tuberculosis and psychoneurosis. This shows the need to practice health education in the area of preventive medicine. (10) 69.5% of the 82 universities, colleges and junior colleges surveyed are concerned with supervision of the environmental sanitation in their school, but non-professionals are in charge at 70.1% of them. This indicates negligence in environmental sanitation. (11) 53.7% of the 82 schools responded that they have no special instructive measure for the students' health and 54.9% are found to be negative in the use of a health education method. This reveals a problem. They are not positive to the recognition of their function as the initiative organization for the students' health. (12) The supplementary education for the faculty of the school health services is executed only at 8.5% of all the schools surveyed.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.388-396
• /
• 2007

KSTAR (Korea Superconducting Tokamak Advanced Research) current lead system (CLS) has a role to interconnect magnet power supply (MPS) in room temperature (300 K) and superconducting (SC) bus-line, electrically. For the first plasma experiments, it should be assembled 4 current leads (CL) on toroidal field (TF) current lead box (CLB) and 14 leads on poloidal field (PF) CLB. Two current leads, with the design currents 17.5 kA, and SC bus-lines are connected in parallel to supply 35 kA DC currents on TF magnet. Whereas, it could supply $20\;{\sim}\;26\;kA$ to each pairs of PF magnets during more than 350 s. At the cold terminals of the leads, there are joined SC bus-lines and it was constructed helium coolant control system, aside from main tokamak system, to protect heat flux through current leads and enhanced Joule heat due to supplied currents. Throughout the establishment processes, it was tested the high vacuum pumping, helium leak of the helium lines and hardwares mounted between the helium lines, flow controls for CL, and liquid nitrogen cool-down of possible parts (current leads, CL helium lines, and thermal shield helium lines for CLB), for the accomplishment of the required performances.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.399-399
• /
• 2008

Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.