• Journal of Advanced Marine Engineering and Technology
• /
• 제34권7호
• /
• pp.981-990
• /
• 2010

The main objective of this study is to investigate the fluid flow and the heat transfer characteristics of nanofluids using multi-phase thermal LBM and to realize theenhancement of heat transfer characteristics considered in the Brownian motion. In multi-phase, fluid component($H_2O$) is driven by Boussinesq approximation, and nanoparticles component by the external force gravity and buoyancy. The effect of Brownian motion as a random movement is modified to the internal velocity of nanoparticles(Cu). Simultaneously, the particles of both the phases assume the local equilibrium temperature after each collision. It has been observed that when simulating $H_2O$-Cu nanoparticles, the heat transfer is the highest, at the particle volume fraction 0.5% of the particle diameter 10 nm. The average Nusselt number is increased approximately by 33% at the particle volume fraction 0.5% of the particle diameter 10 nm when compared with pure water.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.9-12
• /
• 2003

This paper describes a step-by-step method to minimize design iterations in a process of product design change. In the design process, two components are coupled if a change of a component can require the other components change, and design iterations are generated by the coupling. The design iteration is one of main factors that increase design effort. In this study, three matrices are used to solve the design iteration of automatic transmission lever, Requirement-Engineering matrix, Engineering-Components matrix, and DSM(Design Structure Matrix). Firstly, with the DSM, the product architecture and conceptual design process are proposed from product function analysis. Secondly, with the QFD, the Requirement-Engineering matrix and Engineering-Components matrix present the relationship among customer requirements, engineering issues, and product components. Lastly, the results of the QFD analysis are used in the DSM to solve the component interactions and to provide design

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.163-168
• /
• 2002

Hot forging is widely used in the manufacturing of industry machine component. The mechanical, thermal load and thermal softening which are happened by the high temperature in hot forging process. Tool life decreases considerably due to the softening of the surface layer of a tool caused by a high thermal load and long contact time between the tool and billet. Also, tool life is to a large extent limited by wear, heat crack and plastic deformation in hot forging process. These are one of the main factors affecting die accuracy and tool life. That is because hot forging process has many factors influencing tool life, and there was not accurate in-process data. In this research, life prediction of hot forging tool by wear and plastic deformation analysis considering tempering parameter has been carried out for automobile component. The new developed technique in this study for predicting tool life can give more feasible means to improve the tool life in hot forging process.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1288-1292
• /
• 2009

Volatile flavor compounds were isolated from the flowers of Chrysanthemum indicum L. (gamguk) produced in Korea and China by the hydro distillation, and were analyzed by gas chromatography-mass spectrometry (GC/MS). The yield of oils from Korean and Chinese gamguk were 2.0 and 0.5%(v/w), respectively. Sixty-three volatile compounds of Korean gamguk representing 89.28% of the total peak area were tentatively identified, including 35 hydrocarbons, 12 alcohols, 6 ketones, 3 esters, 5 aldehydes, 1 oxide, and 1 miscellaneous component. Thirty-six volatile components of Chinese gamguk constituted 58.15% of the total volatile composition were tentatively characterized, consisting of 19 hydrocarbons, 7 alcohols, 2 ketones, 2 esters, 4 aldehydes, 1 oxide, and 1 miscellaneous component. The predominant components of Korean oil were ${\alpha}$-pinene, 1,8-cineol, and chrysanthenone. Whereas, camphor, ${\alpha}$-curcumene, and ${\beta}$-sesquiphellandrene were the main aroma compounds of Chinese gamguk.

• 약학회지
• /
• 제46권3호
• /
• pp.203-207
• /
• 2002

The antifungal activities of the essential oils from Anthemis nobilis, Ciderus atlantica, Juniperus communis, Lavandula angustifolia, Pelargonium graveolens, Pogestemon patchouli, Rosmarinus officinalis, and Styrax tonkinensis which are recommended for the treatment of microbial infections in aromatherapy and complementary medicines were tested against Candida spp. The activities were measured by broth dilution method and disk diffusion assay. Most of the test oils inhibited growth of Candida albicans, C. utilis and C. tropicalis. Especially, the essential oil from Pelargonium graveolens and its main component, citronellol showed the strongest activity among the herbs except benzoic acid from Styrax tonkinensis which is well-known antimicrobial compound. As a result of checkerboard microtiter test. synergistic effect of citronellol, was shown when the component was combinated with ketoconazole, displaying a fractional inhibiting concentration (FIC) index of 0.37 against C. albicans.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.37-44
• /
• 1993

There are a lot of linear dynamic analysis methods for complex structures. Each method has advantages and shortcomings. Method of dynamic analysis for complex structure is selected considering characteristics of dynamic loading, computer facility available number of degree of freedem and accuracy of results. It is a main point of view to get economical results rather then accurate ones for analysis of general complex structures, Mode superposition method and direct integration method are generally used. However, the characteristics of load is not considered in mode superpositon method, the personal computer cannot be used in direct integration methods. To over-come these shortcomings, the component mode method incorporating Ritz algorithm updated is proposed to solve economically dynamic behavior of the structures. The purpose of study is a formulation of algorithm, and computer programing suitable for dynamic analysis of the complex structure in personal computer environment.

• 천문학논총
• /
• 제14권2호
• /
• pp.79-81
• /
• 1999

We have made an extensive mapping of the $^{13}CO$ J=1-0 transition line in the dark cloud L1535. We also constructed the $100{\mu}m$ IRAS map in the region. We found a semi-detached cloud component of $^{13}CO$ in the northeast direction of the $^{13}CO$ main cloud which forms a dumbbell-like structure. This additional component with an angular size of $20'\times16'$ has not been observed before in any molecular surveys of the cloud. The IRAS map shows a similar structure with two intensity peaks whose positions coincide with those of the $^{13}CO$ clouds.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.151-158
• /
• 2000

Cable dome that consists of three component such as cable, strut and fabric membrane has complex structural characteristics. Main structural system of cable dome is cable-strut tensegric system and fabric membrane element is conceived as cladding roof material. One of the important problem of cable dome is to investigate the structural response from external load effect such as snow and wind. When cable dome is subjected to load each structural component has various special structural characteristics. One is that geometrical nonlinearity should be considered because large deformation is occurred from their flexible characteristic. The other is that wrinkling occurs occasionally because cable and membrane elements can not transmit compressive forces. So this paper researches the physical structural response of cable dome structure and the structural behavior when failure occurred at a part of structure.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권2호
• /
• pp.105-112
• /
• 2018

This paper manufactured an active GPS antenna for ground vehicles and presented a method to verify the performances of the antenna and component technology of the low noise amplifier (LNA) board manufacturing. The manufactured GPS antenna is an active antenna where microstrip patch and LNA board were combined. The main performances were standing wave ratio, antenna gain, and axial ratio, and all satisfied the target specifications. The proposed component technology can be utilized as a basis data in which the performance of LNA board can be compensated in the mass production process inspection, and employed as a method to verify whether antennas are properly working in environmental tests.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.93-97
• /
• 2010

액체로켓엔진 단계식 연소 사이클에 대한 에너지 발란스 프로그램을 개발하였다. 엔진을 추력실, 터보펌프, 터빈, 예연소기, 공급계 부품 등으로 모듈화 하여 각 모듈 프로그램을 제어하는 방식을 사용하였다. 이를 통해 에너지, 질유량, 압력의 균형을 맞추었으며 대표적인 단계식 연소 사이클인 스페이스 셔틀 메인 엔진의 자료를 바탕으로 비교 검증하였다.