• Journal of applied mathematics & informatics
• /
• 제22권1_2호
• /
• pp.339-350
• /
• 2006

The bifurcation point where a satellite component buds from another component is characterized by the existence of the common tangent line between the two osculating components appearing in the degree-n bifurcation set. We investigate the existence, location and number of bifurcation points for satellite components budding from the main component in the degree-n bifurcation set as well as a parametric boundary equation of the main component of the degree-n bifurcation set. Cusp points are also located on the boundary of the main component. Typical degree-n bifurcation sets and their components are illustrated with some computational results.

• Nuclear Engineering and Technology
• /
• 제5권3호
• /
• pp.202-213
• /
• 1973

본 연구의 제1보에 뒤이어서 방향족 염소유도체외 Szilard Chalmer 반응으로 얻어진 유기충치 성분을 분리하여서 표지 조건을 검토하였다. 여러가지 성분을 모두 분리할 수는 없었으나 주성분을 증류법 및 박층 Chromatography등으로 분리하였으며 그 화학구조가 원시료의 표지물임을 확인하였다. 고체시료의 경우에는 주성분이 유기표지물의 80-60%이였고 액체시료에 있어서는 70% 이하였다. 장시간 조사하면 주성분 수율이 증가되었으나 방사선에 불안정한 화합물의 경우에는 도리어 감소하였다. Chromatography로 분리되는 부생성물들의 수율은 액체시료의 경우 많았으나 고체의 경우는 이 보다 적었고 따라서 주생성물의 분리가 용이하였다. 각 화합물의 표지수율을 표시하고 Chromatography에 의한 분리조건을 논의하였으며 이 표지 방식의 실용성을 화학구조와 관련시켜 고찰하였다.

• Journal of applied mathematics & informatics
• /
• 제16권1_2호
• /
• pp.221-229
• /
• 2004

It is known that the parametric boundary equation for the main component in the Mandelbrot set represents a cardioid. We derive an epicy-cloidal boundary equation of the main component in the degree-n bifurcation set by extending the parameter which describes the cardioid in the Mandelbrot set. Computational results as well as some useful properties are presented together with the programming source codes written in Mathematica. Various boundaries are displayed for $2\leqn\leq7$7 and show a good agreement with the theory presented here. The known boundary equation enables us to significantly reduce the construction time for the degree-n bifurcation set.

• 대한한의학방제학회지
• /
• 제17권1호
• /
• pp.61-74
• /
• 2009

This report describes 46 studies related to prescriptions which are mainly used Semen Arecae from Dongeuibogam. The following conclusions were reached through investigations on the prescriptions that use Semen Arecae as a main component. 19.6% of a malaria, 17.4% of an evacuation problem, recorded the largest number of clinical frequency of the prescriptions in therapeutic use when Semen Arecae was taken as a main component in prescriptions Prescriptions that utilize Semen Arecae as the main ingredient are used in the treatment of a malaria, an evacuation problem and a malignant dermatosis. they are also used for treating 11 different types of diseases. The prescriptions are compounded with Semen Arecae as a main component which can be applied to an affection by wind-cold, a heat(fire) syndrome, a cold-stroke, a phlegm-retention syndrome, a constipation induced by apoplexy, a stagnation of vital energy, an asthenia of the spleen and the stomach, a convulsion caused by improper diet, a parasitic infestation and a traumatic disease. The dosage of Semen Arecae is 2.5pun(nearly 0.94g) to 3don(nearly 11.25g), however 1don(nearly 3.75g) has been taken the most for clinical application. When Semen Arecae is combined with basic prescriptions such as Ijintang and Bulium, it applies symptoms of malaria. In addition, when Semen Arecae is combined with basic prescriptions such as Daemainhwan, Soseungkitang and Samatang, it utilizes an evacuation problem.

• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.115-122
• /
• 2022

Component adaptation is widely recognized as one of the main problems of the components, used in component based software engineering (CBSE). We developed methods to adjust the components classified by the keywords. Three main methods are discussed in this article those methods are combined with several domain component interfaces, high level simple notation for the adapter design patterns. The automated process for classifying high-level components are using adaptation is novel to software engineering domain. All Specifications and many technologies for re-using software, CBD and further developments have been emerged in recent years. The effects of these technologies on program quality or software costs must be analyzed. The risk concerns a single technology and must identify its combinations. In this paper, we are going to discuss the methods to adapt components of different technologies

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.337-346
• /
• 2019

The present paper tries to contribute fill the gap of application of the component method to tubular connections. For this purpose, one typical joint configuration in which just one component can be considered as active has been studied. These joints were selected as symmetrically loaded welded connections in which the beam width was the same as the column width. This focused the study on the component 'side walls of rectangular hollow sections (RHS) in tension/compression'. It should be one of the main components to be considered in welded unstiffened joints between I beams and RHS columns. Many experimental tests on double-sided I-beam-to-RHS-column joint with a width ratio 1 have been carried out by the authors and a finite element (FE) model was validated with their results. Then, some different analytical approaches for the component stiffness and strength have been assessed. Finally, the stiffness proposals have been compared with some FE simulations on I-beam-to-RHS-column joints. This work finally proposes the most adequate equations that were found for the stiffness and strength characterization of the component 'side walls of RHS in tension/compression' to be applied in a further unified global proposal for the application of the component method to RHS.

• 대한한의학방제학회지
• /
• 제23권1호
• /
• pp.55-66
• /
• 2015

This report describes the remedial fields, symptoms, pathology, dosage, prescriptional constitution of 40 prescriptions related to the use of Magnoliae Cortex main blended prescriptions from Dongeuibogam. The following conclusions were reached through investigations on the prescriptions that use Magnoliae Cortex as a key component. Prescriptions that Magnoliae Cortex was taken as a monarch drug are utilized for 13 therapeutic purposes, for example, abdominal dropsy, abdominal lump. In particular, 27.5% of the prescriptions appear in the chapter of abdominal dropsy. Prescriptions that utilize Magnoliae Cortex as the main ingredient are used in the treatment of abdominal lump, abdominal dropsy. Magnoliae Cortex is used in pathogenic factors such as cold, congestion of Qi and used in pathology related to digestive system. The dosage of Magnoliae Cortex is 2pun(about 0.75g) to 3don(about 11.25 g), however 1don(about 3.75g) has been taken the most for clinical application. Pyeongwisan is the most useful base prescription which use the Magnoliae Cortex as the main component.

• 한국약용작물학회지
• /
• 제10권4호
• /
• pp.298-302
• /
• 2002

The essential oils were isolated by hydrodistillation and their composition determined capillary GC method with standards. The essential oil content showed significant differences between the two populations on the vegetative organs. The essential oil level of the leaves and roots was considerably higher in the Korean population at full flowering and waxy ripening stage but essential oil content of the roots was significantly higher in the Hungarian taxon at leaf rosette stage. We observed the essential oil accumulation tendency was mianly dependent on plant organs and intra-specific taxon during the vegeation period. Butylidene-phthalide was proved to be the main component of the oil in both population roots (50.9-73.3%), while dimethyl-acetate was showed as a major compound on the over-ground parts (56.7-62.0%). The qualitative composition of the essential oil in the reproductive organs concerning the identified compounds was the same as the vegetative parts with the main component ${\alpha}-phellandrene$ (4.8-28.1%) and butylidene-phtalide (9.7-16.1%), The quantitative composition showed some changes during the ontogenesis phases. Most characteristic ones are the decreasing proportion of dimethyl-acetate (from 7.3% to 1.1%) and the appearance of ${\alpha}-pinene$ (from 0.5% to 1.5%) only after fruit setting in both population.

• Applied Biological Chemistry
• /
• 제27권2호
• /
• pp.129-134
• /
• 1984

콩나물을 온도별로 길러 생장과정별 단백질조성을 7.5% polyacryl amide gel 전기영동법으로 조사하고 조제표품단백질의 그것으로 동정하였다. 원료대두(大豆)에서는 주(主) band 5개(a,b,c,d 및 p)와 미소 band 10개가 나타났고 4일자자엽(日字子葉)에서는 8개의 주(主) band와 (o band포함)와 11개 미소 band로 최고 band수(數)를 보였다. 배축(胚軸)에서는 자엽(子葉)에서 발견(發見)되는 band들이 모두 나타났으나 분리(分離)가 선명치 못하였다. 생육이 경과함에 따라 자엽(子葉)에서는 a band가 먼저, b,c,d band가 다음으로 감소해 갔으며 미소 band o+p는 6일(日)까지 증가하다 그후 감소하였다. 배축(胚軸)에서는 모든 band가 계속 증가하였는데 미소 band와 b+c+d가 증가속도가 컸다. a band는 7S, b+c+d는 11S, o+p는 2S globulin으로 동정되었다. 생육온도가 높아짐에 따라 자엽(子葉)에서의 감소와 배축(胚軸)에서의 증가속도가 빨라졌으며 7S보다 11S가 촉진되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.498-498
• /
• 2001

Seismic qualification of the Main Control Boards for nuclear power plants has been performed with the guideline of AS ME Section III. US NRC Reg. Guide and IEEE 344 code. The analysis model of the Main Control Boards is consist of beam. shell and mass element by using the finite element method. and, at the same time. the excitation forces and other operating loads for each model are encompassed with respect to different loading conditions. As the fundamental frequencies of the structure are found to be less than 33Hz. which is the upper frequency limit of the seismic load, the response spectrum analysis using ANSYS is performed in order to combine the modal stresses within the frequency limit. In order to confirm the structural and functional integrity of the major components, modal analysis theory is adopted to derive the required response spectrum at the component locations. As all the combined stresses obtained from the above procedures are less than allowable stresses and no mechanical or electrical failures are found from the seismic testing, it concludes the Main Control Boards is dynamically qualified for seismic conditions. Although the authors had confirmed the structural and functional integrity of both Main Control Boards and all the component, in this paper only the seismic analysis of the Main Control Board is introduced.