• Title/Summary/Keyword: main component

Search Result 2,129, Processing Time 0.04 seconds

LOCATING AND COUNTING BIFURCATION POINTS OF SATELLITE COMPONENTS FROM THE MAIN COMPONENT IN THE DEGREE-n BIFURCATION SET

  • Geum Young-Hee;Kim Young-Ik
    • Journal of applied mathematics & informatics
    • /
    • v.22 no.1_2
    • /
    • pp.339-350
    • /
    • 2006
  • The bifurcation point where a satellite component buds from another component is characterized by the existence of the common tangent line between the two osculating components appearing in the degree-n bifurcation set. We investigate the existence, location and number of bifurcation points for satellite components budding from the main component in the degree-n bifurcation set as well as a parametric boundary equation of the main component of the degree-n bifurcation set. Cusp points are also located on the boundary of the main component. Typical degree-n bifurcation sets and their components are illustrated with some computational results.

Studies on the Preparation of Organic Halogen Compounds Labelled by $^38 Cl$. (II)

  • Kim, You-Sun
    • Nuclear Engineering and Technology
    • /
    • v.5 no.3
    • /
    • pp.202-213
    • /
    • 1973
  • In a continuation of the 1st series of these studies, a separation of the components in organic phases obtained from Szilard Chalmer reactions of aromatic chloro derivatives was attempted to clarify the conditions of isolating the main component. Though it was unable to isolate all constituents of organic phases, the main component was well isolated by means of a simple distillation or a thin layer chromatography. It was identified that the main component was a recombined product of the recoiled $^{38}$ Cl atom with the original sample. In cases of solid samples the main component amounted about 80-60% of the radio activity of the organic phase, whereas the main component from liquid samples gave less than 70% of the radio activity of the organic phase. A prolonged irradiation could increase the yield of a main component, but it was, in case of a radiation senintive compound, decreased as the irradiation is extended. The number of aide produets separated from an organic phase of a liquid sample was greater than that of a solid sample, and hence the main component of a solid sample was isolated easier. The overall fields of the labelled main products of 22 kinds of compounds were listed and a procedure of the separation of the main component by a thin layer chromatograply was proposed and evaluated. The feasibility of the present procedure for labelling purpose was also reviewed with respects to the chemical structure of a compound.

  • PDF

AN EPICYCLOIDAL BOUNDARY OF THE MAIN COMPONENT IN THE DEGREE-n BIFURCATION SET

  • Geum, Young-Hee;Kim, Young-Ik
    • Journal of applied mathematics & informatics
    • /
    • v.16 no.1_2
    • /
    • pp.221-229
    • /
    • 2004
  • It is known that the parametric boundary equation for the main component in the Mandelbrot set represents a cardioid. We derive an epicy-cloidal boundary equation of the main component in the degree-n bifurcation set by extending the parameter which describes the cardioid in the Mandelbrot set. Computational results as well as some useful properties are presented together with the programming source codes written in Mathematica. Various boundaries are displayed for $2\leqn\leq7$7 and show a good agreement with the theory presented here. The known boundary equation enables us to significantly reduce the construction time for the degree-n bifurcation set.

A Study on Applications of Prescriptions including Semen Arecae as a Main Component in Dongeuibogam ("동의보감(東醫寶鑑)" 중(中) 빈랑(檳榔)이 주약(主藥)으로 배오(配伍)된 방제(方劑)의 활용(活用)에 대한 고찰(考察))

  • Lim, Dai-Hwan;Jeon, Young-Kyun;Lee, Ju-Hee
    • Herbal Formula Science
    • /
    • v.17 no.1
    • /
    • pp.61-74
    • /
    • 2009
  • This report describes 46 studies related to prescriptions which are mainly used Semen Arecae from Dongeuibogam. The following conclusions were reached through investigations on the prescriptions that use Semen Arecae as a main component. 19.6% of a malaria, 17.4% of an evacuation problem, recorded the largest number of clinical frequency of the prescriptions in therapeutic use when Semen Arecae was taken as a main component in prescriptions Prescriptions that utilize Semen Arecae as the main ingredient are used in the treatment of a malaria, an evacuation problem and a malignant dermatosis. they are also used for treating 11 different types of diseases. The prescriptions are compounded with Semen Arecae as a main component which can be applied to an affection by wind-cold, a heat(fire) syndrome, a cold-stroke, a phlegm-retention syndrome, a constipation induced by apoplexy, a stagnation of vital energy, an asthenia of the spleen and the stomach, a convulsion caused by improper diet, a parasitic infestation and a traumatic disease. The dosage of Semen Arecae is 2.5pun(nearly 0.94g) to 3don(nearly 11.25g), however 1don(nearly 3.75g) has been taken the most for clinical application. When Semen Arecae is combined with basic prescriptions such as Ijintang and Bulium, it applies symptoms of malaria. In addition, when Semen Arecae is combined with basic prescriptions such as Daemainhwan, Soseungkitang and Samatang, it utilizes an evacuation problem.

  • PDF

A Novel Approach For Component Classifications And Adaptation Using JALTREE Algorithm

  • Jalender, B.;Govardhan, Dr. A
    • International Journal of Computer Science & Network Security
    • /
    • v.22 no.2
    • /
    • pp.115-122
    • /
    • 2022
  • Component adaptation is widely recognized as one of the main problems of the components, used in component based software engineering (CBSE). We developed methods to adjust the components classified by the keywords. Three main methods are discussed in this article those methods are combined with several domain component interfaces, high level simple notation for the adapter design patterns. The automated process for classifying high-level components are using adaptation is novel to software engineering domain. All Specifications and many technologies for re-using software, CBD and further developments have been emerged in recent years. The effects of these technologies on program quality or software costs must be analyzed. The risk concerns a single technology and must identify its combinations. In this paper, we are going to discuss the methods to adapt components of different technologies

Characterization of the main component of equal width welded I-beam-to-RHS-column connections

  • Lopez-Colina, Carlos;Serrano, Miguel A.;Lozano, Miguel;Gayarre, Fernando L.;Suarez, Jesus M.;Wilkinson, Tim
    • Steel and Composite Structures
    • /
    • v.32 no.3
    • /
    • pp.337-346
    • /
    • 2019
  • The present paper tries to contribute fill the gap of application of the component method to tubular connections. For this purpose, one typical joint configuration in which just one component can be considered as active has been studied. These joints were selected as symmetrically loaded welded connections in which the beam width was the same as the column width. This focused the study on the component 'side walls of rectangular hollow sections (RHS) in tension/compression'. It should be one of the main components to be considered in welded unstiffened joints between I beams and RHS columns. Many experimental tests on double-sided I-beam-to-RHS-column joint with a width ratio 1 have been carried out by the authors and a finite element (FE) model was validated with their results. Then, some different analytical approaches for the component stiffness and strength have been assessed. Finally, the stiffness proposals have been compared with some FE simulations on I-beam-to-RHS-column joints. This work finally proposes the most adequate equations that were found for the stiffness and strength characterization of the component 'side walls of RHS in tension/compression' to be applied in a further unified global proposal for the application of the component method to RHS.

Study on the Applications of prescriptions including Magnoliae Cortex as a main component in Dongeuibogam (東醫寶鑑 中 厚朴이 主藥으로 配伍된 方劑의 活用에 대한 考察)

  • Lee, Jaecheol;Jung, Myung;Lim, Kyusang;Yun, Yonggab
    • Herbal Formula Science
    • /
    • v.23 no.1
    • /
    • pp.55-66
    • /
    • 2015
  • This report describes the remedial fields, symptoms, pathology, dosage, prescriptional constitution of 40 prescriptions related to the use of Magnoliae Cortex main blended prescriptions from Dongeuibogam. The following conclusions were reached through investigations on the prescriptions that use Magnoliae Cortex as a key component. Prescriptions that Magnoliae Cortex was taken as a monarch drug are utilized for 13 therapeutic purposes, for example, abdominal dropsy, abdominal lump. In particular, 27.5% of the prescriptions appear in the chapter of abdominal dropsy. Prescriptions that utilize Magnoliae Cortex as the main ingredient are used in the treatment of abdominal lump, abdominal dropsy. Magnoliae Cortex is used in pathogenic factors such as cold, congestion of Qi and used in pathology related to digestive system. The dosage of Magnoliae Cortex is 2pun(about 0.75g) to 3don(about 11.25 g), however 1don(about 3.75g) has been taken the most for clinical application. Pyeongwisan is the most useful base prescription which use the Magnoliae Cortex as the main component.

Variation of the Essential oil and Main Component from Different Origin of Levisticulum officinale Koch

  • Chung, Hae-Gon;Kim, Seong-Min;Nemeth, E.
    • Korean Journal of Medicinal Crop Science
    • /
    • v.10 no.4
    • /
    • pp.298-302
    • /
    • 2002
  • The essential oils were isolated by hydrodistillation and their composition determined capillary GC method with standards. The essential oil content showed significant differences between the two populations on the vegetative organs. The essential oil level of the leaves and roots was considerably higher in the Korean population at full flowering and waxy ripening stage but essential oil content of the roots was significantly higher in the Hungarian taxon at leaf rosette stage. We observed the essential oil accumulation tendency was mianly dependent on plant organs and intra-specific taxon during the vegeation period. Butylidene-phthalide was proved to be the main component of the oil in both population roots (50.9-73.3%), while dimethyl-acetate was showed as a major compound on the over-ground parts (56.7-62.0%). The qualitative composition of the essential oil in the reproductive organs concerning the identified compounds was the same as the vegetative parts with the main component ${\alpha}-phellandrene$ (4.8-28.1%) and butylidene-phtalide (9.7-16.1%), The quantitative composition showed some changes during the ontogenesis phases. Most characteristic ones are the decreasing proportion of dimethyl-acetate (from 7.3% to 1.1%) and the appearance of ${\alpha}-pinene$ (from 0.5% to 1.5%) only after fruit setting in both population.

Changes of Nitrogen Compounds and Nutritional Evaluation of Soybean Sprout -Part VI. Changes in electrophoretic pattern of protein- (콩나물 제조중(製造中) 질소화합물(窒素化合物)의 변화(變化)와 그 영양학적(營養學的) 연구(硏究) -제육보(第六報). 단백질(蛋白質)의 전기영동양상변화(電氣泳動樣相變化)-)

  • Yang, Cha-Bum;Park, Sang-Ki;Yoon, Suk-Kwon;Park, Hoon
    • Applied Biological Chemistry
    • /
    • v.27 no.2
    • /
    • pp.129-134
    • /
    • 1984
  • Change of protein component in soybean sprout grown at four temperatures was investigated by polyacrylamide gel electrophoresis. Main bands were identified using purified seed globulins. Electrophoretogram showed 5 main bands (a. b, c, d, and p) and 10 minor bands in seed and maximum number (19) of bands (8 main band including 0 and 11 minor) at 4th day after germination in cotyledon. All bands appeared in axis protein but resolution was poor. In cotyledon, a component (most rapidly) and b+c+d component decreased while o+p component and other minor components were increased at 6th day and decreased thereafter. In axis all components increased rapidly, especially in minor components and b+c+d component. High growing temperature accelerated decrease in cotyledon and increase in axis of protein, especially for 11S. The a component was identified as 7S, b+c+d as 11S and o+p as 2S globulin.

  • PDF

Seismic Analysis of the Main Control Boards for Nuclear Power Plant (원자력발전소의 Main Control Boards에 대한 내진 해석)

  • Byeon, Hoon-Seok;Lee, Joon-Keun;Kim, Jin-Young
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2001.11a
    • /
    • pp.498-498
    • /
    • 2001
  • Seismic qualification of the Main Control Boards for nuclear power plants has been performed with the guideline of AS ME Section III. US NRC Reg. Guide and IEEE 344 code. The analysis model of the Main Control Boards is consist of beam. shell and mass element by using the finite element method. and, at the same time. the excitation forces and other operating loads for each model are encompassed with respect to different loading conditions. As the fundamental frequencies of the structure are found to be less than 33Hz. which is the upper frequency limit of the seismic load, the response spectrum analysis using ANSYS is performed in order to combine the modal stresses within the frequency limit. In order to confirm the structural and functional integrity of the major components, modal analysis theory is adopted to derive the required response spectrum at the component locations. As all the combined stresses obtained from the above procedures are less than allowable stresses and no mechanical or electrical failures are found from the seismic testing, it concludes the Main Control Boards is dynamically qualified for seismic conditions. Although the authors had confirmed the structural and functional integrity of both Main Control Boards and all the component, in this paper only the seismic analysis of the Main Control Board is introduced.

  • PDF