• 농업과학연구
• /
• 제47권4호
• /
• pp.987-993
• /
• 2020

This study investigated the effective harvest of 'Kyoho' grapevines by examining their characteristics including bud development, necrosis types and flower primordium formation. The size of the axillary bud did not show any difference in the 5th node or more, but it was smaller because it was closer to the base in the 4th node or less. In the 1st node, the rates of main bud necrosis (MBN), accessory bud necrosis (ABN), and whole bud necrosis (WBN) were high, and the rate of flower primordium formation was low, but there was no significant difference in the other nodes. Therefore, it was expected that using other nodes than the 1st node would be advantageous to secure production. Because the growth progresses after sprouting, the main bud necrosis rate increases, showing a very low flower primordium formation rate in March of the following year. Therefore, a method is needed to increase the storage nutrients in the winter and the rate of flower primordium formation after March. This study found that the thickness of the shoots should be less than 8.5 mm between the 3rd and 4th nodes, and the length should be less than 60 cm for nodes up to the 10th node.

• 한국가스학회지
• /
• 제17권2호
• /
• pp.70-77
• /
• 2013

본 연구는 화력발전소 최종과열기에서 고압터빈 사이 배관과 고압터빈을 지난 곳에 있는 체크밸브와 1차 재열기 사이 배관을 포함한 수증기 배관시스템에서 터빈의 급작스런 사고로 인해 터빈으로 들어가는 수증기를 차단할 때 발생하는 수증기 충격이 배관시스템에 미치는 영향을 분석하는 연구이다. 이를 위해서 수격현상 해석에 많이 사용하는 Flowmaster 소프트웨어로 배관시스템을 모델링하고 시간 변화에 따라 배관 내부의 압력, 질량유량률의 특성을 파악하였다. 이러한 특성으로부터 수증기 충격이 주로 영향을 미치는 곡관에서 수증기 충격에 의한 힘을 도출하였다. 본 연구를 통해서 수증기 충격은 주증기 차단 밸브 직전의 곡관과 체크밸브 이후에 바이패스 배관과 연결되는 곡관에서 수증기 충격에 의한 힘이 가장 크게 나타남을 밝혀냈다. 본 연구에서는 이렇게 도출한 힘의 기본 자료를 이용하여 차후 연구에서 화력발전소 수증기 배관시스템의 수증기 충격 시 곡관과 지지대의 안전성을 진단하는 토대를 구축하였다.

• 보건행정학회지
• /
• 제27권2호
• /
• pp.186-189
• /
• 2017

On May 9th 2017, the 19th presidential election was held. This election was historically significant because of the impeachment of the former president. This election was held in a relatively short period of time, unlike the normal presidential elections. Therefore, there was not enough time to deliberate pledges for candidates and review pledges for the people. South Korea has suffered from many healthcare problems associated with low-birth rate, population aging, and low economic growth rate. In this paper, we compared the '10 main pledge' of the major five candidates of the 19th presidential election and discussed focusing on the healthcare issue. As a result of comparing the 10 main pledge of the major candidates, it was difficult to find healthcare parts whereas there were lots of welfare parts existed. We need enough time to review and discuss pledges in the next election.

• 한국환경과학회지
• /
• 제11권4호
• /
• pp.355-360
• /
• 2002

This study was to analyze the right of wrong of gray-water treatment by applying BPBE electrode cell to the effluence water in the terminal disposal plant of sewage. The results were as follows : The best result was obtained with applied voltage 40V and detention time 6 minutes for the BPBE electrode cell which has the graphite-plate in main electro-de, packing coconut activated carbon. The elimination rate of COD of Al-plate was higher than that of graphite-plate in main electrode. The result of electrolysis for 3 hour in parallel circuit showed the using possibility of gray-water according to each elimination rate : COD 59%, T-N 69 %, T-P 69%. The BPBE electrode cell with the Al-plate in main electrode made the best effect for the elimination of algae in lake water and algae were not occurred in electrolytic water.

• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.49-57
• /
• 2020

The effect of Combined Sewer Overflow on the river system was investigated throughout three preliminary field tests and three main ones. As a result of the study, Combined Sewer Overflow did not affect water qualities on the main stream since the concentration of the main stream did not significantly changed during rainfall events although the water quality of tributaries has rapidly deteriorated due to the influence of the Combined Sewer Overflow during rainfall events. The main cause of the result is that the flow rate of the tributaries is considerably lower than that of the main stream, so that the tributaries with deteriorated water quality during rainfall events did not significantly affect the quality of the actual main stream. Therefore, the water quality of the Kumho River is more affected by the wastewater treatment facilities that discharges water continuously to the main stream than pollutants from non-point pollution sources during rainfall events. As a result, managements for discharges from wastewater treatment facilities should be strengthened in order to improve the water quality of the river.

• 천문학회보
• /
• 제42권1호
• /
• pp.39.2-39.2
• /
• 2017

Stars form through the gravitational collapse of molecular clouds. However, the rate at which a star gains most of its mass and the physics that drives the main phase of stellar growth is still unclear. The typical luminosity of observed protostars is smaller than what expected from the Shu's inside-out collapse model, which predicts a constant mass accretion rate. The episodic accretion model has been suggested as a solution of this luminosity problem. The JCMT Transient survey is a long term monitoring program using JCMT/SCUBA-2 to detect accretion variability of protostars in the eight nearby star-forming regions. Recently, we found a rise of the 850 micron flux at a clump in the Serpens main region at the rate of ~17% relative to the mean flux over previous observations. The submm clump is associated with a class I protostar, EC53, which has been reported as a binary system with a periodic variability. In this talk, we will provide a brief overview of the JCMT Transient Survey project, present the detection of the variable source, and discuss about follow-up observations.

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.101-105
• /
• 1998

This paper describes anisotropic etching technology of highly doped polysilicon. The main etching gases are $Cl_2$ and $SiCl_4$ for reactive ion etching of polysilicon. The mixed $CHCl_3$ to main etching gas makes polymer on etching side wall, so it prevents side etching of polysilicon. The etch rate of polysilicon is increased with increasing RF power. But the etching rate is decreased as the flow rate of $CHCl_3$ is increased with fixed RF power. The etch selectivity of polysilicon and $SiO_2$ is about 12:1. And that of polysilicon and $Si_3N_4$ is about 19:1. In the main etching gas condition, the slope of polysilicon is same as that of photoresist. But in the mixed $CHCl_3$ condition, the slope of polysilicon is larger than that of photoresist. This represents that the polymer made on side wall by added $CHCl_3$ prevents side etching, so anisotropic etching can be possible by polymer.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.325-334
• /
• 2009

Generally, functional design of FPSO has been done by the engineering firm designated by ship owner. Main equipment such as topside facility is imported from abroad. But sometimes, OFE (Owner Furnished Equipment) does not satisfy the PND (Product Need Date) of each production stage because the delivery date of OFE is not scheduled to satisfy the PND. And sometimes many loose items and equipment are complex from engineering which does not consider pre-outfitting. Main objective of this study is process improvements by maximizing pre-outfitting rate in the stage of equipping STP (Submerged Turret Production), one of main equipment on FPSO. In this study, we analyzed the factors which obstructed pre-equipping STP using the past records of FPSO projects.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1055-1062
• /
• 1988

본 연구에서는 역학모델을 이용해 공구마멸 특성을 절삭속뿐만 아니라 공구와 유리섬유의 접촉길이에 대해서도 논하고, 이 결과와 실험결과를 대비 검토하였다. 또 몇 가지 공구재종으로 절삭성능을 측정하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.313-319
• /
• 1999

The development of deformation texture in FCC polycystalline metals during rolling was simulated by the finite element analysis using a large-deformation, elaatic-plastic, rate-dependent polycrystalline model of crystal plasticity. Different plastic anisotropy due to different orientation of each crystal makes inhomogeneous deformation. Assuming plane strain compression condition, the simulation with a high rate sensitivity resulted in main component change from Dillamore at low rate sensitivity to Brass component.