• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.167-174
• /
• 2003

Fatigue damage of 2.2Ni-1Cr-0.5Mo steel used fir high strength pressure tubes and vessels was evaluated using uniaxial specimens subjected to strain-controlled fatigue loading. Based on the fatigue test results from different strain ratios of -2. -i 0, 0.5, 0.75, the fatigue damage of the steel was represented by using a cyclic strain energy density. Mean stress relaxation depended on the magnitude of the applied strain amplitude. The high pressure vessel steel exhibited the cyclic softening behavior. Total strain energy density consisting of the plastic strain energy density and the elastic tensile strain energy density described fairly well the fatigue life of the steel, taking the mean stress effects into account. Compared to other fatigue damage parameters, fatigue life prediction by the cyclic strain energy density showed a good correlation with the experimental fatigue lift within a factor of 3.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.475-482
• /
• 2002

A moment-curvature relationship to simulate the behavior of reinforced concrete (RC) columns under cyclic loading is introduced. Unlike previous moment4curvature models and the layered section approach, the proposed model takes into account the bond-slip effect by using a monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The pinching effect caused by axial force is considered with an assumption that the absorbing energy corresponding to any deformation level maintains constant regardless of the magnitude of applied axial lone. The advantages of the proposed model, comparing to layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures. Finally, correlation studies between analytical result and experimental studies are conducted to establish the validity of the proposed model.

• 한국지진공학회논문집
• /
• 제28권2호
• /
• pp.77-83
• /
• 2024

The design shear strength equations of RC shear walls have been developed based on their performance under in-plane (IP) loads, thereby failing to account for the potential performance degradation of shear strength when subjected to simultaneous out-of-plane (OOP) loading. Most of the previous experimental studies on RC walls have been conducted in one direction under quasi-static conditions, and due to the difficulty in experimental planning, there is a lack of research on cyclic loading and results under multi-axial loading conditions. During an earthquake, shear walls may yield earlier than their design strength or fail unexpectedly when subjected to multi-directional forces, deviating from their intended failure mode. In this paper, nonlinear analysis in finite element models was performed based on the results of cyclic loading experiments on reinforced concrete shear walls of auxiliary buildings. To investigate the reduction trend in IP shear capacity concerning the OOP load ratio, parametric analysis was conducted using the shear wall FEM. The analysis results showed that as the magnitude of the OOP load increased, the IP strength decreased, with a more significant effect observed as the size of the opening increased. Thus, the necessity to incorporate this strength reduction as a factor for the OOP load effect in the wall design strength equation should be discussed by performing various parametric studies.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.549-553
• /
• 2007

Moving parts of the rotating and reciprocating mechanism are the most important components of the diesel engines and require very high reliability in their design. Especially the crankshaft, the key component of running gear (powertrain), is subject to complicated loadings such as bending, shear and torsion coming from firing pressure, inertia forces and torsional vibration of crankshaft system. Intrinsically they show different cyclic patterns of loading in both direction and magnitude, and thus ordinary approach of proportional loading is less valid to analyze the dynamic structural behavior of crankshaft. In this paper, new fatigue analysis method is introduced to analyze and design the crankshaft of a medium-speed diesel engine in order to consider the non-proportional multi-axial loads realistically as well as to present the general fatigue analysis approach for an engine crankshaft.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.53-66
• /
• 2017

Structures submitted to Fire-After-Earthquake loading situations, are first experiencing inelastic deformations due to the seismic action and are then submitted to the thermal loading. This means that in the case of steel framed structures, at the starting point of the fire, plastic hinges have already been formed at the ends of the beams. The basic objective of this paper is the evaluation of the rotational capacity of steel I-section beams damaged due to prior earthquake loading, at increased temperatures. The study is conducted numerically and three-dimensional models are used in order to capture accurately the nonlinear behaviour of the steel beams. Different levels of earthquake-induced damage are examined in order to study the effect of the initial state of damage to the temperature-evolution of the rotational capacity. The study starts with the reference case where the beam is undamaged and in the sequel cyclic loading patterns are taken into account, which represent earthquakes loads of increasing magnitude. Additionally, the study extends to the evaluation of the ultimate plastic rotation of the steel beams which corresponds to the point where the rotational capacity of the beam is exhausted. The aforementioned value of rotation can be used as a criterion for the determination of the fire-resistance time of the structure in case of Fire-After-Earthquake situations.

• 한국지진공학회논문집
• /
• 제28권1호
• /
• pp.67-75
• /
• 2024

In the case of the Pohang earthquake, which had a magnitude of 5.4 in 2017, geotechnical damages such as liquefaction and ground settlement occurred. The need for countermeasures has emerged, and experimental research in the Pohang area has continued. This study collected undisturbed samples from damaged fine-grained soil areas where ground settlement occurred in Pohang. Cyclic tri-axial tests for identifying the dynamic characteristics of soils were performed on the undisturbed samples, and the results were analyzed to determine the cause of ground settlement. As a result of the study, it was determined that in the case of fine-grained soils, ground settlement occurred because the seismic load as an external force was relatively more significant than the shear resistance of the very soft fine-grained soils, rather than due to an increase in excess pore water pressure.

• 한국전산구조공학회논문집
• /
• 제29권4호
• /
• pp.363-368
• /
• 2016

본 연구에서는 수치해석을 통하여 반복하중으로 인해 곡관에 형성되는 피로균열에 대한 분석을 수행하였다. 곡관의 수치해석 모델을 개발하였으며, 균열 형성 시점과 형성 과정에 기초하여 수치해석 모델을 검증하였다. 요소에 erosion 기능을 적용하여 피로균열을 표현하고 형성 시점을 추정하고자 하였으며, 두께방향으로 다수의 요소를 배치하여 균열의 형성 과정 또한 모사하고자 하였다. 100 mm 변위에 대한 실험결과와 비교하여 균열의 형성 시점 및 형상이 잘 일치하는 것을 확인하였으며, 추가적인 다른 변위에 대한 균열의 형성 시점 또한 예측하였다. 본 모델을 사용하여 다양한 형태의 하중에 대해 해석을 수행한다면 곡관의 형상 및 특성에 따른 하중과 균열 형성시점의 관계를 예측할 수 있을 것으로 기대된다.

• 한국지반공학회논문집
• /
• 제23권6호
• /
• pp.5-21
• /
• 2007

보강토 옹벽은 기존 콘크리트 옹벽에 비하여 많은 장점을 지니고 있으나 장기적으로 지속하중 혹은 반복하중 등에 의한 잔류변형의 우려로 영구 구조물로서의 적극적인 적용에 장애가 되고 있다. 이 문제를 해결하기 위해서는 보강토 구조물의 시간 의존적 잔류변형 메카니즘의 규명과 아울러 잔류변형을 예측하고 제어하는 기술이 확보되어야 한다. 본 연구에서는 이러한 연구의 필요성에 근거하여 보강토 옹벽에 발생할 수 있는 장기변형 특성 고찰에 주안점을 두고 지오그리드와 표준사로 뒤채움된 모형 보강토 옹벽에 대한 지속하중 혹은 반복하중 등 다양한 하중이력에 대한 보강토 구조물의 장기변형 특성 메카니즘을 축소모형실험을 통해 고찰하였다. 그 결과 보강토 옹벽의 시간의존적 변형은 작용하는 하중특성 뿐만 아니라 뒤채움흙 및 보강재의 역학적 특성에도 많은 영향을 받는 것으로 나타났으며, 선행하중을 작용함으로써 시간 의존적 잔류변형을 제어할 수 있는 것으로 파악되었다.

• 콘크리트학회논문집
• /
• 제13권5호
• /
• pp.415-422
• /
• 2001

본 연구에서는 반복하중을 받는 철근콘크리트보의 피로현상에 피로의 지속으로 인한 크리프 특성을 고려함으로서 실제의 반복사용하중상태에서 크리프와 피로가 공존하는 것을 반영하여 모델을 구성하였다. 반복크리프 모델에서, 철근 콘크리트 보의 휨손상 진행에 따른 압축영역의 손상속도를 정확히 대표할 수 있는 반복크리프 지수(n)의 특성을 도입하여 평가하였다. 이 지수는 크리프특성의 지수 n$_1$과 피로특성의 지수 n$_2$로 구분하였다. 모델의 적정성을 평가하기 위하여 철근콘크리트보의 피로실험을 수행하였으며, n$_2$의 경우 보통강도에서 고강도까지 콘크리트의 강도와 하중크기를 주요변수로 실험하였다. 본 실험결과로부터 반복하중에 의한 크리프모델의 지수를 결정하였다. 본 연구에서 제시된 반복크리프모델은 철근콘크리트 보의 피로손상의 누적과 처짐거동을 잘 설명할 수 있는 것으로 나타났으며, 앞으로 이들 부재의 피로거동해석에 유용하게 적용될 수 있을 것으로 사료된다.

• 한국농공학회지
• /
• 제34권4호
• /
• pp.69-79
• /
• 1992

To estimate soil behavior and structural characteristics under the conditions of cyclic loading, freezing & thawing and initial state, several testing was performed and obtained following results. 1.After repeated freezing and thawing processes, original soil structure was destroyed and changed to globular structure from honeycomb or tube in its structure types. Also above processes resulted increasing the soil compression strain while decreasing the failure stress in stress-strain relationship and reached the soil structure into the mode of brittle fracture. Under cyclic loading conditions, soil cluster which was originally dispersed structure colloided with each other, seperated, and finally the soil failed due to the effect of overcompaction. 2.Through the stabilization processes seperated by four steps, the structure of soil skeleton was changed to quite different globular type. The degree of compressibility of soil was decreased in the normally consolidated zone, while the strength against external load increased due to soil particle stabilization. 3.Soil stress-strain chracteristics were largely influenced by repeated up and down processes of temperature. The maximum deformation was obtained in the case of temperature between 0 10˚C by the reseon of particle cluster reformation. 4.Soil compressibility was largely influenced by the optimum moisture content. Under freezing process, swelling could be found and its magnitude was proportional to the density of soil. 5.Density of soil was decreased as increasing the number or repeated freezing and thawing processes and the largest decreasing rate was found at the first turning point from freezing to thawing cycle.