• Speech Sciences
• /
• v.8 no.2
• /
• pp.73-81
• /
• 2001

In this paper, we focus on the real time implementation of the single channel adaptive noise canceller(ANC) by using TMS320C30 EVM board. The implemented single channel adaptive noise canceller is based on a reference paper [1] in which it is simulated by using the recursive average magnitude difference function(AMDF) to get a properly delayed input speech on a sample basis as a reference signal and normalized least mean square(NLMS) algorithm. To certify results of the real time implementation, we measured the processing time of the ANC and enhancement ratio according to various signalto-noise ratios(SNRs). Experimental results demonstrate that the processing time of the speech signal of 32ms length with delay estimation of every 10 samples is about 26.3 ms, and almost the same performance as given in [1] is obtained with the implemented system.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.113-116
• /
• 1999

신호 대 잡음비가 낮은 환경에서 센서 어레이에 입사된 입력 신호 사이의 지연시간 추정(Time Delay Estimation, 이하 TDE)은 높은 분해능이 요구된다. 본 연구에서는 높은 분해능의 TDE를 구하기 위해 상호상관함수(Cross-Correlation)에 평균 차 함수(Average Magnitude Difference function, AMDF)의 역수를 가중한 MCC (Modified Cross-Correlation)알고리즘을 제안한다. 모의신호를 사용한 수치 시뮬레이션 실험으로 종래의 AMDF, Cross-Correlation 알고리즘과 본 연구에서 제안한 MCC 알고리즘의 분해능을 비교 분석하였다 각 알고리즘의 TDE 결과에 대해 STFT(Short Time fourier Transform)에 의한 시간 주파수 해석을 한 결과 MCC알고리즘을 사용하여 TDE 분해능이 향상되었음을 보고한다.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.684-689
• /
• 2012

A mode-singular-value-decomposition (SVD) maximum likelihood (ML) estimation procedure is proposed for the source localization problem under an additive measurement error model. In a practical situation, the noise variance is usually unknown. In this paper, we propose an algorithm that does not require the noise covariance matrix as a priori knowledge. In the proposed method, the weight is derived by the inverse of the noise magnitude square in the ML criterion. The performance of the proposed method outperforms that of the existing methods and approximates the Taylor-series ML and Cram$\acute{e}$r-Rao lower bound.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.115-118
• /
• 2004

In this study, amplitudes of turbulence excitation are obtained for selected tubes inside the KSNP SG and their normal work-rates are investigated to estimate the magnitude of fretting-wear. From the results of numerical calculation, row 40&41 tubes show the maximum work-rates. Up to this row number, the work-rates inside the row 41 have much larger values than those of outside tubes. This phenomenon reveals the particular central one which has larger normal work-rate than that of outside zone. It turns out that both of the higher local mode at the U-bend region and the larger value of effective mass in the central region Increase the normal work-rate enormously.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.382-387
• /
• 2012

This paper presents a proof-of-concept study on the evaluation of torsional vibration isolation performance through in-situ output torque measurement by using a non-contacting magneto-elastic torque transducer installed in the vehicle driveline system. The de-trending processing is first conducted to extract the torsional vibration from the measured driveline output torque. In order to estimate the transmissibility, primary performance indicator of a vibration isolator, the magnitude of transmitted torsional vibration with different frequencies is compared. From the conservative estimation results, the torsional damper built in a lock-up clutch of a torque converter is identified to be a vibration isolator. The evaluation results show that the fluid damping by torque converter outperforms the vibration isolation function of a torsional damper, and the isolation performance needs to be enhanced.

• Journal of Photoscience
• /
• v.9 no.1
• /
• pp.29-32
• /
• 2002

The solvent effect in a series of polar and non-polar solvents of varying dielectric constants and refractive indices has been investigated by studying electronic spectra (S$_1$band) of a series of exalite laser dyes at room temperature (25$\pm$1$\^{C}$). These data are used to determine the magnitude ($\mu$$\_$e/) and direction ($\theta$) of the electric dipole moments in the first electronically excited state. The results indicate that the observed band systems in these compounds may be attributed to ←$\pi$ transition.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.617-623
• /
• 2005

Forestry and agricultural land uses constitute 85% of Korea and these land uses are typically mixed in many watersheds. Biological Oxygen Demand (BOD) concentration is a primary factor for managing water qualities of the water resources in Korea. BOD loadings from diffuse sources, however, not well monitored yet. This study aims to assess BOD loadings from diffuse sources and their affecting factors to conserve quality of water resources. Event Mean Concentration (EMC) of BOD was calculated based on the monitoring data of forty rainfall events at four agricultural-forestry watersheds. Exceedence cumulative probability of BOD EMCs were plotted to show agricultural activities in a watershed impacts on the magnitude of EMCs. Prediction equation for each rainfall event was proposed to estimate BOD EMCs: $EMC_{BOD}(mg/L)=EXP(0.413+0.0000001157{\times}$(discharged runoff volume in $m^3$)+0.018${\times}$(ratio of agricultural land use to total watershed area).

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.49-53
• /
• 2005

We are often faced with the task of having to estimate the amplitude of a source signal in the presence of a background. In the simplest case, the background can be taken as being flat, and of unknown magnitude B, and the source signal of interest assumed to be the amplitude A of a peak of known shape and position. We present a robust method to find the most probable values of A and B by applying the one-dimensional Newton-Raphson method. In the derivation of the formula, we adopted the Bayesian statistics and assmumed Poisson distribution so that the results could be applied to the analysis of very weak signals, as observed in FIMS (Far-ultraviolet IMaging Spectrogaph).

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.36-43
• /
• 2015

Accurate prediction of supersonic transition is required for the heat transfer estimation over supersonic double compression ramp flows. Correlation-based transition models were assessed for a supersonic double ramp problem. Numerical results were compared with experimental data from RWTH Aachen University. A parametric study on the nose bluntness was performed using a selected transition model. As the nose bluntness increases, the boundary layer thickness is increased and the triple point of shock interactions moves downstream. The peak magnitude of the heat transfer is consequently decreased with the nose bluntness.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.17-20
• /
• 2008

An Electric motor is used for user-friendly equipment in vehicles. In this paper, an electric motor for windows is considered for the tunning of engineering inspection concerned with noise level from it. Noise from the electric window motor is a kind of structure-borne noise and becomes a reference parameter for its engineering performance. Estimation of noise from the motors shows the quantitative values such as overall noise. Noise level at each frequency and the qualitative figures for the transient characteristics of sound are also revealed. The loudness level, one of the qualitative parameters, distinguishes the performances of every components by the comparison of its magnitude. In summary, it is found that the qualitative comparisons become useful means for the inspection of electric motors.