• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06c
• /
• pp.125-128
• /
• 1994

선형예측기법으로 피치동기식 분석을 하기 위해 우선적으로 필요한 정보로서 유성음 신호의 영교차 구간별 평균 진폭변동율 추출에 의한 주기별 피치를 검출할 수 있는 기법을 제안하였다. 유성음의 제1포먼트 성분에 대한 각 영교차 구간에서의 평균진폭값은 성대 폐쇄시점에서 주기별 최대치를 나타내며, 평균진폭변동율은 "+" 영역의 평균진폭값과 선행하는 "-" 영역 값의 차로 표시한다. 이 평균 진폭 변동율은 성대파형의영향이 반영되어 주기성이 더욱 강조되므로 분석구간에 대한 구간별 평균피치와 변화의 정도를 이용하여 주기별피치정보를 추출할 수 있다. 검출결과는 구간별 평균피치와 비교하였으며, 좋은 결과가 나타나는 것을 확인할 수 있다.과가 나타나는 것을 확인할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.179-187
• /
• 2012

This paper presents a novel method for estimating reliable noise spectral magnitude for acoustic background noise suppression where only a single microphone recording is available. The proposed method finds noise estimates from spectral magnitudes measured at line spectral frequencies (LSFs), under the observation that adjacent LSFs are near the peak frequencies and isolated LSFs are close to the relatively flattened valleys of LPC spectra. The parameters used in the proposed method are LPC coefficients, their corresponding LSFs, and the gain of LPC residual signals, so it suits well to LPC-based speech coders.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.701-708
• /
• 2004

This paper discusses applicability of the enhanced reference stress method to estimate J-integral along the semi-elliptical surface crack front. It is found that angular variations of normalized J­integral are strongly dependent on the geometry, loading mode and loading magnitude. As application of the reference stress approach to semi-elliptical surface cracks implies proportional increases in the normalized J-integral, the present results pose a question in applicability of the reference stress approach. However, investigation of the error in the estimated J-integral in the present work suggests that the enhanced reference stress approach, recently proposed by authors, provides an effective engineering tool fur estimating crack driving force along the semi-elliptical surface crack front.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.18-18
• /
• 2000

In the high lift devices specifications for surface smoothness requirements, as manufacturing tolerances, arise out of aerodynamic consideration to minimize drag. True optimization of tolerances is a multi-disciplinary problem involving fluid mechanics, device performance, manufacturing philosophy and life cycle costing. One of the reasons for degradation of wetted surface is discrete roughness as a consequence of manufacturing defects, collectively termed as one of the excrescences effect. Usually, excrescence drag arising out of discrete roughness is of considerable lower order of magnitude as compared to the total drag of the flight bodies. Nor was there adequate predicting tool to account for the extent of drag degradation. Estimation of excrescence drag remained as a state-of-the art based on experimental results.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.48-59
• /
• 1992

This study is on the performance of the perforated tube muffler when it operates as an exhaust silencer with through-flow, steady or pulsating. Theoretical estimation of the insertion loss was made by means of transfer matrix and by using the impedance equation for the perforated tube obtained for the case of low-speed steady through-flow. Experiment was performed for the measurement of the insertion loss at two flow conditions. The one is a steady flow from the exhaust pipe of an idling diesel engine. The effect of the through-flow velocity and steadiness on the muffler performance was obtained. By comparing the theoretical prediction with the experimental result, the validity of the impedance equation in the theoretical model was discussed. It has been found that steadiness as well as magnitude of the through-flow has a significant effect on the performance of the perforated tube muffler. Especially, the self-noise due to the pulsating flow in the engine exhaust system must be taken into account for the prediction of the muffler performance.

• Journal of Power System Engineering
• /
• v.5 no.3
• /
• pp.48-55
• /
• 2001

In many applications. rubber components undergo dynamic stresses or deformations of fairly large magnitude. Since rubbers are not fully elastic, a part of the mechanical energy is converted into heat due to the hysteresis loss. Heat generation without adequate heat dissipation leads to heat build up. i. e. internal temperature rise. The purpose of this paper is to predict temperature rise caused by the hysteresis loss, in a rubber pad subjected to complex dynamic deformation. In this unsteady thermal analysis, the temperature distributions of track components are displayed in contour shapes and the temperature variations of some important nodes are represented graphically with respect to the running time of the tank.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.186-189
• /
• 2001

본 연구에서는 2종류의 색온도(4000 K, 2700 K)조건 하에서 작업자의 피로도를 평가하기 위하여 피험자에게 검색작업을 부가하고 주관평가 및 생리신호를 측정하였다. 주관평가는 ME(Magnitude Estimation)법의 설문지를 사용했으며, 생리신호는 ECG, 맥파, 피부전도도, 피부온도, 호흡, 뇌파를 측정하여 그중 ECG신호를 분석하였다. ECG신호 파라미터로서 IBI, BPM, 평균 BPM, LF/HF, CSI, CVI, CV-RR를 분석한 결과, 특히 CSI, CVI, CV-RR가 피로도와 상관관계가 높았다.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2005.09a
• /
• pp.272-277
• /
• 2005

We introduce a new approach to optimize the parameters in biological kinetic models by quantifier elimination (QE), in combination with numerical simulation methods. The optimization method was applied to a model for the inhibition kinetics of HIV proteinase with ten parameters and nine variables, and attained the goodness of fit to 300 points of observed data with the same magnitude as that obtained by the previous optimization methods, remarkably by using only one or two points of data. Furthermore, the utilization of QE demonstrated the feasibility of the present method for elucidating the behavior of the parameters in the analyzed model. The present symbolic-numeric method is therefore a powerful approach to reveal the fundamental mechanisms of kinetic models, in addition to being a computational engine.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.4
• /
• pp.377-382
• /
• 2012

This paper presents a proof-of-concept study on the evaluation of torsional vibration isolation performance through in-situ output torque measurement by using a non-contacting magneto-elastic torque transducer installed in the vehicle driveline system. The de-trending processing is first conducted to extract the torsional vibration from the measured driveline output torque. In order to estimate the transmissibility, primary performance indicator of a vibration isolator, the magnitude of transmitted torsional vibration with different frequencies is compared. From the conservative estimation results, the torsional damper built in a lock-up clutch of a torque converter is identified to be a vibration isolator. The evaluation results show that the fluid damping by torque converter outperforms the vibration isolation function of a torsional damper, and the isolation performance needs to be enhanced.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.73-78
• /
• 2001

It has been proposed that the acceptable level of discomfort was a valid measure of postural loading. Although the number of women employees has increased at a much faster rate than men workers did and female workers are thought to be more vulnerable to musculoskeletal disorders, most previous studies dealt with perceived discomforts for joint motions focused on male subjects. This study aims to measure perceived discomfort ratings of females for static joint motions. Ten female subjects participated in the experiment measuring perceived discomforts, in which almost every possible joint motion was included and the free modulus method of the magnitude estimation was employed. The results showed that discomfort levels were dependent on the joint motions and joints, and subjective discomfort ratings of women were significantly larger than those of men.