• 제목/요약/키워드: magnification

검색결과 692건 처리시간 0.028초

편평세포폐암에서 Argyrophilic Nucleolar Organizer Regions(AgNORs)의 임상적의의 (Clinical Significance of Argyrophilic Nucleolar Organizer Regions(AgNORs) In Squamous Cell Carcinoma of the Lung)

  • 한승범;전영준;이상숙
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권4호
    • /
    • pp.513-521
    • /
    • 1995
  • 연구배경: 세포의 증식능력을 반영한다고 알려진 NORs를 간편한 은염색으로 발현시켜서 AgNORs 수가 정상조직과 종양조직의 비교감별과 종양의 증식능력판단에 유용한지를 알기위하여 파라핀 포매된 편평세포폐암 조직을 이용하여 본 연구를 시행하였다. 방법: 수술로써 절제한 파라핀 포매된 편평세포폐암 조직 36예를 Mourad 등의 방법으로 은염색하였다. 1,000 배 배율하에서 종양조직과 정상조직에서 임의로 100 개씩 세포를 선정해서 핵당 평균 AgNORs수를 구하였다. 결과: 종양조직에서 TNM병기에 따른 핵당 평균 AgNORs수는 유의한 차이가 없었으나 정상조직과 종양조직을 비교허여 정상조직에서는 $1.74{\pm}0.25$, 종양 조직에서는 $4.05{\pm}0.80$으로 종양조직의 핵당 평균 AgNORs수가 정상조직에 비해서 유의하게 높았다(p<0.001). 결론: TNM분류에 따른 각 병기별 종양조직과 인접 정상조직의 핵당 평균 AgNORs수를 비교하여도 각 병기에서 종양조직의 평균 AgNORs수가 정상조직에 비하여 유의하게 높았다(p<0.005).

  • PDF

EDTA를 이용한 치근면 처리가 치은섬유모세포의 초기 부착에 미치는 영향 (Effect of Root Surface Treatment Using EDTA on the Initial Attachment of Human Gingival Fibroblasts)

  • 김성봉;임기정;김상목;김병옥;한경윤
    • Journal of Periodontal and Implant Science
    • /
    • 제30권1호
    • /
    • pp.145-157
    • /
    • 2000
  • Cytotoxic substances in dental calculus and root cementum of periodontally diseased teeth inhibit new attachment and regeneration. The purpose of scaling and root planing is to remove pathologic structures harboring these cytotoxic substances in order to create a biologically acceptable root surface. However, these procedures inevitably leave a non-biocompatible smear layer. Conventionally, the smear layer has been removed with low pH etching agents such as citric acid, phosphoric acid and tetracycline hydrochloride(TC). Lately, a supersaturated neutral pH etching solution of ethylene diamine tetraacetic acid(EDTA) has been found to be as effective as low pH etchants with respect to smear removal and to be superior in exposing root surfaceassociated collagen. The aim of the present study was to determine the effect of root surface treatment using EDTA on the initial attachment of human gingival fibroblasts. 27 human teeth, extracted due to severe periodontitis, were cut into dentin slices after root planing. The specimens were divided into TC group(treated with $50㎎/m{\ell}$ tetracycline-HCl, pH 1.52), EDTA group(treated with 17% EDTA, pH 7.4), and non-treated control group. After sterilization, 5th subcultured human gingival fibroblasts were seeded in each culture well containing a prepared root slice and incubated for 15 min., 60 min., and 4 hours in 5% $CO_2$ incubator at $37^{\circ}C$. At each incubation time, the number of attached fibroblasts were counted on the microphotographs taken at a magnification of x100. The difference of the number of attached cells between groups was statistically analyzed by the ANOVA followed by Duncan test in SPSS/PC+programs. The results were as follows : 1. After incubation for 15 min, the attached cells were significantly more in EDTA group and TC group than non-treated control group(p<0.05), but there was no significance in the difference between EDTA group and TC group(p>0.1). 2. After incubation for 60 min and 4 hours, there was no significant difference in the number of attached cells between all groups(p>0.1). 3. In both EDTA group and TC group, there was no significant difference in the number of attached cells between different incubation(p>0.1). But in control group, the number of attached cells was significantly increased after incubation for 60 min, compared with incubation for 15 min(p<0.05). The above results suggest that root surface treatment using EDTA could enhance the initial attachment of gingival fibroblasts to root surface as effective as tetracycline-HCl.

  • PDF

CAD/CAM 3-unit bridges의 변연 적합도에 관한 연구 (A study on the marginal fit of CAD/CAM 3-unit bridges)

  • 이기홍;여인성;김성훈;한중석;이재봉;양재호
    • 대한치과보철학회지
    • /
    • 제49권2호
    • /
    • pp.101-105
    • /
    • 2011
  • 연구 목적: 본 연구에서는CAD/CAM (computer-aided design / computer-aided manufacturing) 시스템으로 제작된LAVA (3M ESPE, Seefeld, Germany) 3-unit bridge와 통상적인 방법으로 제작된 PFG 3-unit bridge의 변연 적합도를 비교 분석해 보고자 한다. 연구 재료 및 방법: 레진치를 전부 도재관을 위한 삭제를 시행하고 인상 채득하여 레진 모형 (Exakto-form model resin, Bredent, Senden, Germany)을군당10개씩 제작하였다. 레진 모형의 인상을 채득하여 석고 모형을 제작하고 PFG, LAVA 3-unit bridge를 10개씩 제작하였다. 제작된 bridge를 레진 모형에 접착하고 실체 현미경(Stereoscopic microscope, Nikon DS-Fi 1, Nikon, Japan)을 사용하여 각 치아당 4점에서 변연 적합도를 측정하였다 (${\times}75$). 측정된 결과는 independent t-test로 통계 분석하였다 (${\alpha}$ = 0.05). 결과: 각 군에서 변연 적합도의 평균과 표준편차는 PFG bridge 중절치에서는 $97.1{\pm}18.7\;{\mu}m$, 견치에서는 $76.6{\pm}21.8\;{\mu}m$, LAVA bridge 중절치에서는 $90.4{\pm}26.7\;{\mu}m$, 견치에서는$110.2{\pm}30.2\;{\mu}m$ 이었다. PFG 3-unit bridge와LAVA 3-unit bridge에서 중절치에서는 통계적 유의성이 없었고, 견치에서는LAVA의 변연 간격이 큰 것으로 나타났다 (P<.05). 결론: PFG 3-unit bridge와 LAVA 3-unit bridge 두 군 모두 임상적으로 받아들여질 만한 변연 적합도를 보였다.

NiO/MoO3/MoS2의 공탑속도에 따른 유동화 특성 (Flow behavior characteristics according to superficial gas velocity of NiO/MoO3/MoS2)

  • 이재랑;;전성민;이강산;이관영;김광득;박영옥
    • 한국입자에어로졸학회지
    • /
    • 제13권2호
    • /
    • pp.79-85
    • /
    • 2017
  • 실험실 규모의 유동층 반응기(Length=0.25m, Diameter=0.05m)에서 고부가가치 물질인 희유금속 산화물 $NiO/MoO_3/MoS_2$의 공탑속도에 따른 최소유동화 속도 및 압력손실 경향을 확인하였다. 시료의 L/D 1, 2, 3 변화에 따른 Superficial gas velocity 0.07~0.45 m/s 범위에서 $NiO/MoO_3/MoS_2$의 L/D 1, 2, 3에서의 평균 압력손실은 Decreasing flux에서 290~1952 Pa, Increasing flux에서 253~1925 Pa로 나타났다. Wen이 제시한 이론값과 실험데이터를 비교해본 결과, 0.021~0.36배 차이나는 것을 확인하였다. 이번 결과를 통하여, 희유금속 산화물을 실제 현상에서 적용 가능한 운전조건을 결정할 수 있었다.

KrF 엑시머 레이저를 이용한 웨이퍼 스텝퍼의 제작 및 성능분석

  • 이종현;최부연;김도훈;장원익;이용일;이진효
    • 한국광학회지
    • /
    • 제4권1호
    • /
    • pp.15-21
    • /
    • 1993
  • 본 연구에서는 설계제작된 KrF 엑시머 레이저 스텝퍼는 광원인 KrF엑시머 레이저, 조명광학계, 축소트영광학계, 정밀구동 웨이퍼 스테이지, 정렬시스템 및 이들을 제어하기 위한 제어계로 구성되어 있다. 본 실험에서 사용한 KrFdprtlaj 레이저는 밴드폭 3pm, 반복주파수 200Hz, 평균축력 3W이고, 5:1 투영렌즈는 N.A. 0.42, 전체 필드영역 $\varphi$21.2mm, 왜곡수차 최대 60nm 이하이다. 또한 정밀구동 웨이퍼 스테이지의 재현성과 해상도는 각각 $\pm$0.08$\mu\textrm{m}$/200mm(3 sigma), 100mm 반경에서 0.05 $\mu\textrm{m}$이다. 자동 초점 시스템은 $\pm$50$\mu\textrm{m}$범위에서 0.1$\mu\textrm{m}$의 해상도를 나타냈으며, 자동수평시스템은 120 arcsec 범위에서 larcsec의 해상도를 나타냈다. OFF-AXIS 정렬방식에서는 0.2$\mu\textrm{m}$의 해상도를 가지며, 두빔의 간섭을 이용한 새로운 TTL 정렬은 0.1$\mu\textrm{m}$의 해상도를 나타냈다. 스텝퍼 패턴 실험결과 SAL603레지스트를 사용하였을 때 웨이퍼의 노광후 열처리 $105^{\circ}C$, 60초에서 0.3$\mu\textrm{m}$ Lines and Spaces(L/S)까지 해상되었으며, 0.34$\mu\textrm{m}$ L/S에서 1$\mu\textrm{m}$의 초점심도를 얻을 수 있었다. 마스크 패턴과 레지스트 패턴의 선형성은 0.4$\mu\textrm{m}$ L/S가지 유지 되었다. 또한 XP-89131레지스트의 경우 노광후 열처리 $110^{\circ}C$, 60초에서 0.34$\mu\textrm{m}$ L/S까지 해상됨을 알수 있었다.

  • PDF

하악 제1 대구치 근단부의 형태학적 연구 (MORPHOLOGY OF THE APICAL ROOT CANAL SYSTEM IN KOREAN MANDIBULAR FIRST MOLAR)

  • 정현;박상진;박상혁;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제34권2호
    • /
    • pp.137-144
    • /
    • 2009
  • 본 연구는 한국인의 하악 제1 대구치 60개를 대상으로 생리적 근단공의 크기와 형태, 근심 치근의 치근단 3mm에서 isthmus의 발생 빈도와 형태, 그리고 원심 치근의 치근단 3mm의 근관 형태를 입체현미경하에서 60배로 조사한 결과 다음과 같은 결론을 얻었다. 1.근심 치근은 두 개의 근단공을 가지는 비율이 높았으며(51.67%), 원심 치근은 하나의 근단공을 가지는 비율이 높았다(71.66%). 2. 부근단공의 빈도는 근심 치근의 1개의 근단공을 가지는 경우가 가장 높았다(26.07%) 3. 생리적 근단공의 크기는 근심 치근에서 하나의 근단공을 가지는 경우 0.329mm, 근심 협측 근단공은 0.266mm, 근심 설측 근단공은 0.246mm였으며, 원심 치근에서 하나의 근단공을 가지는 경우 0.375mm, 원심 협측 근단공은 0.291mm, 원심 설측 근단공은 0.237mm로 나타났다. 4. 근단공의 형태는 oval 형태 (69.93%)가 가장 많았다. 5.근심 치근의 치근단 3mm에서 isthmus의 발생빈도는 55%였으며, partial isthmus는 31.66%, complete isth-mus는 23.34%로 나타났다. 6.원심 치근의 치근단 3mm의 근관 형태는 oval형태(50.64%)가 가장 많았다. 이상의 연구 결과 하악 제1대구치의 성공적인 근관 치료를 위해서는 생리적 근단공의 실제 크기와 형태 및 isthmus의 존재에 대한사전 지식이 필요할 것이다.

PROFILE을 이용한 근관형성 시 ANTICURVATURE FILING방법의 영향 (EFFECT OF ANTICURVATURE FILING METHOD ON PREPARATION OF THE CURVED ROOT CANAL USING PROFILE)

  • 송현지;장주혜;조경모;김진우
    • Restorative Dentistry and Endodontics
    • /
    • 제30권4호
    • /
    • pp.327-334
    • /
    • 2005
  • 본 연구에서는 ProFile로 근관형성 시 anticurvature filing 방법의 영향을 평가하고자 하였다 변형된 Bramante 법을 이용해 36개의 레진 블록을 치근단으로부터 8mm부위와 근관의 최대 만곡 부위에서 절단한 후 재조립하였다. 근관형성의 동작에 따라 anticurvature filing motion, circumferential filing motion, straight up-and-down motion의 3가지 실험군으로 분류한 다음 ProFile로 근관을 형성하였으며, 술 전$\cdot$후의 단면을 stereomicroscope로 촬영, 저장하고 중첩하여 근관 단면의 변화와 근관의 중심 이동률을 비교 평가하였다. 모든 위치에서 단면적 변화량, 만곡 내측으로의 형성량과 중심 이동률은 세 군간에 유의한 차이가 없었으며, 만곡 외측으로의 형성량은 치근단으로부터 8mm 부위에서 anticurvature filing motion, circumferential filing motion, straight up-and-down motion의 순으로 많았으나, 근관의 최대 만곡 부위에서는 차이가 없었다 이상의 결과에서 만곡 근관의 위험 부위에서 ProFile로 근관형성 시 anticurvature filing motion의 영향은 다른 motion과 비교해 볼 때 유의할 만한 차이가 없는 것으로 생각된다.

근관내 잔존 Calcium Hydroxide제재가 치근단 미세누출에 미치는 영향 (EFFECT OF CALCIUM HYDROXIDE REMNANT AS AN INTRACANAL DRESSING ON THE APICAL LEAKAGE)

  • 신수일;조용범
    • Restorative Dentistry and Endodontics
    • /
    • 제26권1호
    • /
    • pp.77-85
    • /
    • 2001
  • The purpose of this in vitro study was to compare the apical leakage in extracted teeth filled with gutta-percha subsequent to dressing with one of three different calcium hydroxide preparations. Thirty six extracted teeth with single canal were used in this study. After working length determination, canals were prepared with K flexo files to a #40 at the working length. Step-back flaring was produced by using #45, #50 K flexo files and #2, #3, #4 Gates Glidden burs. The teeth were randomly divided into 3 groups of 10 each : the remaining six teeth were used for negative and positive leakage control: Group 1, dressed with pure calcium hydroxide powder (Sigma, USA) mixed with distilled water; Group 2, dressed with Metapaste (Metadent, Korea) ; Group 3, dressed with Vitapex (Neo Dental, Japan). Teeth were sealed with Caviton (GC, Japan) and incubated in 100% humidity, at 37$^{\circ}C$ for 1 wk. All kinds of calcium hydroxide were removed from the canal with a MAF and 5% NaOCl. The canals were filled with AH-26$^{\circledR}$ sealer and gutta-percha using lateral condensation technique, incubated in 100% humidity, at 37$^{\circ}C$ for 2 days for the sealer to be set. The teeth were coated twice with nail varnish except for an area of approximately 2mm surrounding the apical foramen. All specimens were placed in 2% methylene blue solution for 2 days. The root were sectioned longitudinally, the amount of apical leakage was measured to the most coronal part of the root canal to which the dye had penetrated. The independent measurements were made for each root using a stereomicroscope ($\times$40 magnification) and the average was recorded for statistical analysis. The results were as follows ; 1. The mean of apical leakage in group of pure calcium hydroxide ranged 0.102$\pm$0.156mm, in Metapaste$^{\circledR}$ ranged 0.062$\pm$0.069mm, and in Vitapex$^{\circledR}$ ranged 0.067$\pm$0.072mm. 2. Group of pure calcium hydroxide exhibited more leakage than those of 2 manufactured calcium hydroxide preparations, but it was not statistically significant. 3. Group of water-based Metapaste$^{\circledR}$ showed lesser leakage than that of oil-based Vitapex$^{\circledR}$, but it was not statistically significant.

  • PDF

다차원 영상 시스템을 위한 변형계층 모션벡터 추정알고리즘 (Metamorphosis Hierarchical Motion Vector Estimation Algorithm for Multidimensional Image System)

  • 김정웅;양해술
    • 정보처리학회논문지B
    • /
    • 제13B권2호
    • /
    • pp.105-114
    • /
    • 2006
  • 다양한 종류의 컴퓨터가 사람, 사물, 환경 속에 내재되어 있고, 이들이 서로 연결되어, 필요한 곳에서 활용할 수 있는 유비쿼터스 환경에서는 홈 네트워크를 통해 이 기종 기기간 다양한 데이터 교환을 요구한다. 더욱이 원활한 영상 데이터의 처리, 전송, 모니터링 기술은 핵심적 요소가 아닐 수 없다. 공간 및 시간적인 해상도, 컬러의 표현 그리고 화질의 측정방법 등 고전적 영상 처리 연구 분야뿐만 아니라 국한된 대역폭을 갖는 홈 네트워크의 전송 체계에서 전송률 문제에 대한 심도 있는 연구가 필요하다. 본 논문에서는 홈 네트워크 상황에서 콘텐츠의 중심이 되는 영상 데이터의 전송과 처리 그리고 제어를 위하여 새로운 움직임 추정 알고리즘을 제안하고 이를 이용하여 다중카메라에서 전송된 다차원 영상의 실시간 모니터링 시스템을 구현한다. 각도, 거리등 다양한 환경에서 전송되어지는 스테레오 카메라의 영상 데이터들은 축소, 확대, 이동, 보정 등 전처리 후 제안된 움직임 보상을 위한 변형계층 모션벡터 추정 알고리즘을 이용하여 압축 처리, 전송 된다. 기존 모션벡터 추정 알고리즘인 전역 탐색, 3단계 탐색, 계층적 탐색이 갖는 장점을 계승하고 단점을 보완한 변형계층 알고리즘은 비정형, 소형 매크로 블록을 이용하여 휘도의 편차가 큰 영상의 효율적 움직임 추정에 이용된다. 본 논문에서 제안한 변형계층 움직임 추정 알고리즘과 이를 이용해 구현된 영상 시스템은 유비궈터스 환경에서 다양하게 활용될 수 있다.

복부 일반촬영시 초점-필름간거리 변화가 피폭선량 및 화질에 미치는 영향 (Effects on Patient Exposure Dose and Image Quality by Increasing Focal Film Distance in Abdominal Radiography)

  • 김유현;권수일
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제21권1호
    • /
    • pp.52-58
    • /
    • 1998
  • We can and must improve the diagnostic images using available knowledge and technology. At the same time we must strive to reduce the patient's integral and entrance radiation dose. Reducing the integral dose to the patient during the radiologic procedure is a primary concern of the patient, especially the pediatric patient, the radiologist and the technologist. A 100cm focal film distance generally is used for most over-table radiography. The early x-ray tubes and screen film combinations required long exposures, which often resulted in motion artifacts. But nowaday, we have the generators and x-ray tubes that can deliver the energy necessary in a very short time and the receptors that can record the information just as rapidly. And, we performed this studies to evaluate the patient exposure dose and the image quality by increasing focal film distance in diagnostic radiography. There are many factors which affected to exposure factor, but we studied to verify of FFD increase, only. Effect of increasing the focal film distance to a 140 cm distance was tested as follows; 1. The focal film distances were set at 100, 120, and 140cm. 2. A 18cm acryl(tissue equivalent) phantom was placed on the table top. 3. An Capintec 192 electrometer with PM 05 ion chamber was placed at the entrance surface of the phantom, and exposure were made at each focal film distances. 4. The procedure was repeated in the same manner as above except the ion chamber was placed beneath the phantom at the film plane. 5. Exit exposure were normalize to 8mR for each portions of the experiment. Based on the success of the empirical measurements, a detailed mathematical analysis of the dose reduction was performed using the percent depth dose data. The results of this study can be summerized as followings ; 1) Increasing FFD from 100 cm to 140 cm, we would create a situation that would have a significant effect on the overall quality of radiograph and achive the 17.42% reduction of entrance dose and the 18.95% reduction of integral dose that the patient receives. 2) Thickness of Al step wedge for equal film density increased with the long distance. 3) Increasing FFD, Magnification of image was lowered. 4) Resolution of image also increased with the FFD. As the results described above, we strongly recommend using the long FFD to provide better information for our patients and profession in abdomen radiographic studies.

  • PDF