• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.109-124
• /
• 1990

The purpose of this study was to investigate the physical propertise and determine whether three were any differences in the amount of porosity of the denture base resins cured by microwave irradiation and conventional water bath heating. The resins used in this study were K-33 resin and Acron MC resin. The properties selected were transverse strength, Knoop hardness, and density. A ten-power eyepiece and scanning electron microscope(Magnification of ${\times}$ 30and ${\times}$150)were used to examine the specimens for porosity. Through analyses of the data from this study, the following conclusions were obtained. 1. Microwave energy can be effectively use dtopolymerize poly(methylmethacrylate) denture base resins. 2. In the transverse strength, K-33 resin cured by microwave irradiation was the first highest, water bath cured K-33 resin the second, microwave cured Acron MC resin the third, water bath cured Acron MC resin the fourth. 3. In the Knoop hardness, K-33 resin cured by microwave irradiation was the first hardest, water bath cured K-33 resin the second, water bath cured Acron MC resin the third, microwave cured Acron MC resin the the fourth. 4. No significant difference was found between the density of resin denture bases polymerized by either method. 5. K-33 resin showed the most porosity for the microwave curing. But there was no significant difference in the Acron MC resin and other curing method.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.81-89
• /
• 2020

Purpose: This in vitro study was conducted to evaluate the marginal and internal fit of three-unit Co-Cr frameworks fabricated by computer-aided metal milling and direct metal laser sintering(DMLS) systems in comparison to conventional casting method. Methods: Three-unit Co-Cr frameworks were fabricated by conventional wax up with casting(CWC), computer-aided metal milling(MM) and direct metal laser sintering(DMLS)(n=10 each). The marginal and internal fit of specimens were examined using a light-body silicone impression material. The thickness of light-body silicone was measured at eight reference points each, divided in the mesio distal and bucco lingual directions. All measurements were conducted by a stereomicroscope. Digital photos were taken at 150× magnification and then analyzed using a measurement software. The Kruskal-Wallis test and Bonferroni correction were used for analyzing the results. Results: The mean(SD) is ㎛ for fabrication methods, the mean marginal fit were recorded respectively, DMLS 39(27), followed by CWC 63(38), MM 220(128). and the mean internal fit CWC 95(47), DMLS 116(49), MM 210(152). In addition, the largest gap was found in the occlusal surface area among the internal measurement areas of all groups. Conclusion: As a result, the direct metal laser sintering method showed better marginal and internal fit than the metal milling method. The marginal and internal fit were statistically different according to the three fabrication methods(p<0.001). Except the MM group, the marginal fit of the CWC and DMLS groups was below the clinical standard of 120 ㎛. Based on the results of this study, it can be applied to clinical use in the future.

• 천문학회지
• /
• 제48권1호
• /
• pp.83-92
• /
• 2015

Recent large scale surveys such as Sloan Digital Sky Survey have produced homogeneous samples of multiple-image gravitationally lensed quasars with well-defined selection effects. Statistical analysis on these can yield independent constraints on cosmological parameters. Here we use the image separation statistics of lensed quasars from Sloan Digital Sky Survey Quasar Lens Search (SQLS) to derive constraints on cosmological parameters. Our analysis does not require knowledge of the magnification bias, which can only be estimated from the detailed knowledge on the quasar luminosity function at all redshifts, and includes the consideration for the bias against small image separation quasars due to selection against faint lens galaxy in the follow-up observations for confirmation. We first use the mean image separation of the lensed quasars as a function of redshift to find that cosmological models with extreme curvature are inconsistent with observed lensed quasars. We then apply the maximum likelihood test to the statistical sample of 16 lensed quasars that have both measured redshift and magnitude of lens galaxy. The likelihood incorporates the probability that the observed image separation is realized given the luminosity of the lens galaxy in the same manner as Im et al. (1997). We find that the 95% confidence range for the cosmological constant (i.e., the vacuum energy density) is $0.72{\leq}{\Omega}_{\Lambda}{\leq}1.0$ for a flat universe. We also find that the equation of state parameter can be consistent with -1 as long as the matter density ${\Omega}_m{\leq}0.4$ (95% confidence range). We conclude that the image separation statistics incorporating the brightness of lens galaxies can provide robust constraints on the cosmological parameters.

• 한국의류산업학회지
• /
• 제12권2호
• /
• pp.224-232
• /
• 2010

The natural dyeing of fabrics with persimmon juice(astringent persimmon, sweet persimmon, astringent and sweet persimmon mix) was investigated. After dyeing of cotton and silk fabrics with persimmon juice, we evaluated the dyeability of persimmon juice, the observation of fabric surface with high magnification video microscope, physical properties and color fastness with the conditions of repeating times of dyeing and variables of mordants. The results obtained from this study were as follows: The fabrics dyed with astringent persimmon have shown the highest color difference, while the fabrics dyed with sweet persimmon and the fabrics dyed with astringent and sweet persimmon mix have shown similar color differences. With the increase of repeating times of dyeing, the brightness of fabric decreased. However, $a^*$ value increased gradually, so that it became dark brown color. The $a^*$ and $b^*$ values of dyed fabrics with Fe-mordant have dropped significantly, so that they have shown achromatic colors. But the fabrics treated with other mordants have shown yellowish brown colors. On the surface of the fabrics, threads were bonded together by the viscosity of persimmon juice. Regardless of the types of persimmon juice, stiffness was increased after dying, while crease resistance was decreased. The water repellency of silk fabrics were improved than cotton fabrics after dyeing with sweet persimmon juice, but in case of cotton, it hasn't changed. Washing fastness was improved with the EM(Effective Microorganism)-fermented liquid treatment, and rubbing fastness of two fabrics was better in dry condition than in wet condition.

• Journal of Yeungnam Medical Science
• /
• 제25권2호
• /
• pp.108-116
• /
• 2008

Background : When surgeons plan mandible ortho surgery for patients with skeletal class III facial asymmetry, they must be consider the exact method of surgery for correction of the facial asymmetry. Three-dimensional (3D) CT imaging is efficient in depicting specific structures in the craniofacial area. It reproduces actual measurements by minimizing errors from patient movement and allows for image magnification. Due to the rapid development of digital image technology and the expansion of treatment range, rapid progress has been made in the study of three-dimensional facial skeleton analysis. The purpose of this study was to conduct 3D CT image comparisons of mandible changes after mandibular surgery in facial asymmetry patients. Materials & methods : This study included 7 patients who underwent 3D CT before and after correction of facial asymmetry in the oral and maxillofacial surgery department of Yeungnam University Hospital between August 2002 and November 2005. Patients included 2 males and 5 females, with ages ranging from 16 years to 30 years (average 21.4 years). Frontal CT images were obtained before and after surgery, and changes in mandible angle and length were measured. Results : When we compared the measurements obtained before and after mandibular surgery in facial asymmetry patients, correction of facial asymmetry was identified on the "after" images. The mean difference between the right and left mandibular angles before mandibular surgery was $7^{\circ}$, whereas after mandibular surgery it was $1.5^{\circ}$. The right and left mandibular length ratios subtracted from 1 was 0.114 before mandibular surgery, while it was 0.036 after mandibular surgery. The differences were analyzed using the nonparametric test and the Wilcoxon signed ranks test (p<0.05). Conclusion: The system that has been developed produces an accurate three-dimensional representation of the skull, upon which individualized surgery of the skull and jaws is easily performed. The system also permits accurate measurement and monitoring of postsurgical changes to the face and jaws through reproducible and noninvasive means.

• 한국컴퓨터정보학회논문지
• /
• 제16권4호
• /
• pp.23-28
• /
• 2011

본 논문에서는 복부의 초음파 영상을 확대할 경우에 발생하는 영상의 품질 저하를 최소화하기 위하여 원본 영상과 확대된 결과 영상 간의 명암도 차이와 보간 수행 시에 적용되는 가중치 값을 퍼지 기법에 적용하여 영상을 확대하는 방법을 제안한다. 제안된 방법은 기존의 양선형 보간법으로 도출된 결과 영상의 픽셀과 원본 영상 픽셀 간의 명암도 차이와 보간 수행시에 네 개의 픽셀 값에 곱하게 되는 가중치 값을 퍼지 소속 함수에 적용하여 원본 영상의 픽셀 정보와 가장 근접한 특징을 가진 확대된 결과 영상의 픽셀 정보를 도출한다. 제안된 방법을 실험한 결과, 기존의 양선형 보간법에 비해 복부의 초음파 영상을 확대할 때 발생하는 흐림 현상이 상대적으로 감소하여 영상의 품질이 개선되는 것을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제19권8호
• /
• pp.45-54
• /
• 2014

본 논문에서는 확대영상의 화질을 향상시키기 위하여 영상의 곡면 특성을 활용한 효과적인 영상 확대 기법을 제안하였다. 제안된 기법에서 제시된 방법으로 영상의 단순 볼록 곡면 혹은 단순 오목 곡면을 효과적으로 추정하고, 단순 볼록 곡면 혹은 단순 오목 곡면으로 추정된 경우에는 확대하고자 하는 원본영상으로 역방향 사상된 좌표에서의 보간 값을 제안된 기법에서 제시된 효율적인 방법으로 계산하여 해당곡면의 특성을 잘 반영하는 보간 값을 구한 후 이를 확대영상의 보간 픽셀 값으로 하여 확대영상이 실제영상의 곡면 특성을 충실히 반영하도록 하였다. 또한 단순 볼록 곡면 혹은 단순 오목 곡면이 아닐 경우에는 역방향 사상된 좌표 주위의 기준 픽셀들의 영향을 더욱 정교하게 반영하도록 보간 값을 구하고 이를 확대영상의 보간 픽셀 값으로 한다. 실제 영상에 존재하는 단순 볼록 곡면 혹은 단순 오목 곡면의 특성을 더욱 충실히 반영하여 실제영상에 더욱 근접한 확대영상을 구성하도록 하기 위하여 위의 절차를 반복적으로 적용하여 확대영상을 구성하였다. 제안된 기법을 적용한 확대영상들의 PSNR(Peak Signal to Noise Ratio) 값이 기존의 기법들을 적용한 확대영상들보다 큰 것을 실험을 통해 확인하였다.

• 융합정보논문지
• /
• 제10권5호
• /
• pp.143-149
• /
• 2020

이 연구의 목적은 치과용 루페 사용에 대한 치과 위생사의 인식과 태도를 조사하는 것이었다. 치과 의료기관 및 보건소에서 일하는 180명의 치과위생사를 대상으로 설문조사를 수행하였으며, 치과임상에서의 루페에 대한 치과위생사의 인식 및 태도에 대해 분석하였다. 전체 응답자 중 4.6%가 현재 루페를 사용한다고 응답했으며, 38.9%는 치과 의료기관에 루페도입이 필요하다고 응답했다. 약 절반에 해당하는 대상자는 루페가 시력 향상(53%)과 선명도 향상 (44%)에 도움이 된다고 응답하였다. 루페 착용에 있어 가장 일반적으로 응답한 단점은 제한되는 시야 (39%)와 전반적인 의존성(38%)이었다. 대부분의 치과위생사들은 치과 진료에서 루페를 사용하지 않았음을 확인했으며, 루페에 대한 관심도는 매우 낮았다. 치위생과정에서의 루페 적용 및 그 효과를 입증하기 위한 더 많은 연구가 필요할 것으로 사료된다.

• 한방안이비인후피부과학회지
• /
• 제29권3호
• /
• pp.259-273
• /
• 2016

Objectives: Objectives of this research is to test hair growth effect of the hair scalpdetox five step program.Methods : Data for this research is gathered from participants who are suffering from hair loss and have completed scalpdetox five step program at a esthetic by receiving treatments twenty times constantly with once or twice a week during three months from March 2015 to April 2016. The hair scalpdetox program consists of five steps : the first step is shampooing, the second is scalp massage with aroma oils, the third is vertical meridian scrapping massage, the fourth is applying scalp and hair pack made with natural herbs, and the last is scalp massage with an indirect high frequency massaging device.Results: Subjective evaluations from the participants show that overall hair scalp conditions are meaningfully improved. Participants evaluated that tested approach helps hair growth by increasing the number of hair (p<.01) and helps to make their hair thicker (p<.01). Visual observations with magnification by 60 times and 200 times show improvement in hair scalp condition and clean opening of pores. Photographs of hair loss parts of each participant also show improvement in hair growth.Conclusions: From the evaluation of the participants for the test program and from visual observations, we conclude that suggested hair scalpdetox five step program has effect on improving scalp, hair condition, and hair growth.

• 한국광학회지
• /
• 제5권1호
• /
• pp.1-8
• /
• 1994

축소배율(M=+1/5)을 갖는 극자외선(deep dultra-violet)리소그라피용 5-반사광학계를 설계하였다. 우선 모든 3차 수치를 영으로 하는 수치적인 해를 반사경이 구면인 경우에 대해서 구하였다. 이렇게 하여 구한 3차원적인 분포를 하는 해의 영역에서 잔류수차량과 MTF에 큰 영향을 주는 central obscuration이 될 수 있는 한 적은 해들을 선택하여 마지막 두 반사경을 비구면화 하였다. 이 중 최종적인 해로서 선택한 것은 central obscuration이 약 25%이고 광원을 ArF 엑시머 레이저(파장 0.193 ${\mu}m$)로 하는 nearly inchorent illumination(${\sigma}$=1)인 경우 NA가 0.45이며 분해능이 50% MTF 기준치와 초점심도 0.8 ${\mu}m$에 대해 약 650 cycles/mm 정도인 성능을 갖는 시스템이 되었다.