• Journal of the Korea Safety Management & Science
• /
• v.2 no.1
• /
• pp.89-97
• /
• 2000

This paper shows the study for development inprocess measuring magnetic sensor for tolerance control, First, we fabricated and annealed sample amorphous ribbons which were made of ($CO_{0.94}$$Fe_{0.06}$)$_{79}$$Si_{2}$$b_{19}$ having near zero magnetostrictive. It had 12［$\mu\textrm{m}$］ of thickness, 10［mm］ of length, and 2.5［mm］ of width. Then, we measured the magnetic characteristics such as frequency dependency over impedance variation rate and position change over impedance variation. As the results of the evaluation, we found that the sample ribbons had excellent sensor characteristics. Then, we made sensors by using the sample ribbons, As the results of the measurements, it proved that the ribbon could be used as excellent magnetic sensor for which it was possible to control inprocess measurement within the tolerance range(~$\mu\textrm{m}$ ).

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.311-314
• /
• 2000

자왜 재료는 자계 포화 이하에서 비선형 특성을 갖는다고 알려져 있다. 그러나 지금까지 비선형 특성을 표현하는 자왜 재료의 구조 방정식을 유도한 사례는 전무한 실정이다. 본 연구에서는 자계 포화 이하에서 비선형 특성을 갖는 자왜 재료의 비선형 구조 방정식을 4차 텐서를 이용하여 유도하였다. 나아가 유도된 구조방정식을 이용하여 자왜 재료 내의 파동 방정식을 정식화하였다. 그리고 비선형 특성을 갖는 자왜 재료에서 평면파가 자계 방향을 따라 전파될 때 등방성 자왜 재료의 탄성파 속도를 구하였다. 이상의 결과를 검증하기 위해서 자왜 재료 중에서 가장 널리 사용되고 있는 Terfenol-D의 탄성파 속도를 측정하여 본 연구에서 유도한 자왜 재료 비선형 구조 방정식의 타당성을 일부 검증하였다. 향후에 자왜 재료의 정확한 특성을 측정하여 본 연구 결과와 비교함으로써 본 연구에서 유도한 비선형 구조 방정식의 타당성을 검증하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.419-421
• /
• 1994

A linear actuator using Terfenol-D rod which can accumulate displacement of the rod was fabricated. The diameter of used rod is 12[mm] and the length of it is 75[mm]. It adopts the electromagnetic units as the clamping units. Basic characteristics of the linear actuator such as displacement vs. current, velocity vs. frequency, step size vs. frequency were experimented. When the driving current is 1[A] and 100[Hz], the velocity of the actuator is about 3.5[mm/s]. We discussed the cause of step size's decrease as increasing driving frequency and the solution to the problem.

• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1404-1411
• /
• 2016

Pipe wall thinning in the secondary piping system of a nuclear power plant is currently a major problem that typically affects the safety and reliability of the nuclear power plant directly. Regular in-service inspections are carried out to manage the piping system only during the overhaul. Online thickness monitoring is necessary to avoid abrupt breakage due to wall thinning. To this end, a transducer that can withstand a high-temperature environment and should be installed under the insulation layer. We propose a thin plate type of embedded ultrasonic transducer based on magnetostriction. The transducer was designed and fabricated to measure the thickness of a pipe under a high-temperature condition. A number of experimental results confirmed the validity of the present transducer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.255-258
• /
• 2005

Recently, demands for the reduction of noise generated by transformers have been increasing. Almost all the noise generated by a transformer is a result of magnetostrictive vibration in the core. The noise radiates into the atmosphere from the tank through the insulation oil. One method of reduction such a noise is to build a free-standing enclosure of concrete and steel plates around the transformer. However, this method has some disadvantages, for example, a large area is needed for equipment installation. In this paper, the vibration and noise effects which is transferred from reinforce channel to insulation panel generated by transformer have been identified for the several kinds of insulation panel shape and damping sheet experimentally.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.249-255
• /
• 2000

The design and test of an magnetostrictive linear motor(MLM) that operates based on self-moving cell concept is presented. The moving cell is composed of Terfenol-D linear actuator and a ring structure, and a cell train is constructed by connecting two cells in series. Since this motor uses the stroke of Terfenol-D actuators and friction force of the cells, it can essentially produce long stroke and large force. The overall performance of the MLM was measured in terms of speed and force. The pushing force is directly related with the friction force. This work is a proof-of-concept stage and investigation is necessary for realistic application.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.34-34
• /
• 2003

Piezoelectric or magnetostrictive materials, known as smart materials, have been researched widely for sensors or actuators in micro system technology. In our research, thick sol-gel lead zirconate titanate(Pb(Zr$\sub$1-x/Ti$\sub$x/)O$_3$) films were fabricated and their characteristics were investigated f3r angular rate sensor applications. The thickness of the PZT films is 1.5${\mu}$m, which is required by a vibration angular rate sensor for a good actuation and sensing. The remnant polarization of the PZT flms is 12.0 ${\mu}$C/$\textrm{cm}^2$. The electromechanical constants of PZT thin film showed the value of susceptance(B) of 4800${\mu}$ s at capacitance of 790pF. The PZT films were applied to the vibration angular rate sensor structure and the vibration of 1.78 ${\mu}$m in amplitude at the resonant frequency of 35.8㎑ was obtained by driving voltage of 5V$\sub$p-p/ of bulk piezoelectric materials with out of phase signal through voltage and inverting amplifier.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.22-27
• /
• 2000

Amorphous FeCoSiB films with high saturation magnetostriction and excellent soft magnetic properties have been studied to evaluate their strain sensitivity. Films were subjected to a strain by bending of their substrates, which caused a change in the magnetic anisotropy of films via magnetoelastic coupling. Films were exhibited a figure of merit $F=({\Delta}{\mu}/{\mu})/{\varepsilon}$ (change in film permeability $\mu$ per unit strain $\varepsilon$) of $1.2{\times}10^5$, which is comparable with that of amorphous ribbons. To make a study of application of magnetostrictive films as strain sensor elements, we have prepared a micro-patterned film by means of the photolithography and ion milling processes. Impedance change in the patterned films, when strain was applied, was measured over the frequency range from 1 MHz to 1 GHz. Reflecting a large value of figure of merit F, a variation of 46% impedance of films was shown at 100 MHz frequency when a strain of $300{\times}10^{-6}$ was applied.

• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.214-222
• /
• 2002

In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The weight loss of PET fabrics hydrolyzed in 4% and 6% NaOH solution, at $95^\circ{C}$ and $99^\circ{C}$ for 60min. with ultrasonic application showed 3.7~4.6% higher than that of treated fabric without ultrasonic application. From the difference of specific weight loss, the treatment condition of the maximum of hydrolyzation effect appeared at $95^\circ{C}$ in $4^\circ{C}$ and at $90^\circ{C}$ in 6% NaOH solution, respectively. During the alkali hydrolysis of PET fabrics, the decomposition rate constant(k) increased exponentially with the treatment temperature and were not related with ultrasonic cavitation. The activation energy$(E_a)$ in decomposition of PET fabrics were 21.06kcal/mol with ultrasonic application and 21.10kcal/mol without ultrasonic application. The ultrasonic application gave a little higher value of the activation entropy$(\Delta{S}^\neq)$ and a little lower value of Gibbs free energy$(\Delta{S}^\neq)$ compared with not used ultrasonic apparatus.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.257-262
• /
• 2004

본 논문에서는 초음파 웨이브렛 지연시간을 이용한 초고온 온도 측정법을 기초로 하여, 이 기술을 바탕으로 두 번째 단계인 용융물 온도에서 내구성을 갖는 초음파 센서(UTS : Ultrasonic Temperature Sense)를 설계하여 약 $2300^{\circ}C$까지 실험로 내부의 온도를 측정하고자 한다. 이때 UTS 설계의 중요 인수는 센서 봉 외부 표면과 시스(sheath) 내부 표면의 두 텅스텐 재료가 비접촉 상태로 요구된다. 만약 이들 두 재료가 고온의 상태에서 접촉되면 음향적 분로인 Shunting 현상이 발생한다. 이 현상을 물리적으로 억제하기 위한 센서 설계가 필요하게 되며, 이 센서 설계의 성공 여부의 첫째 요구 조건으로서 센서 내부의 구조적으로 음향 Shunting 현상을 억제하는 기술이 필요로 하게 된다. 이들 센서의 내부 구조에 상호 접촉을 피하기 위해서 작은 공간에 새롭게 구조적 분리가 가능한 텅스텐 재료인 Standoff를 제작하여 설치하였다. 그러나 본 실험에서는 제안된 Standoff적용한 출력 신호의 신호 대 잡음 비는 소량의 개선 가능성을 확인하였으나, 다양한 Standoff의 설계와 제작이 지속적으로 진행되어야 할 것이다.