• 전기학회논문지
• /
• 제56권2호
• /
• pp.282-288
• /
• 2007

Magnetization loss of high temperature superconductoring BSCCO tape and YBCO coated conductor(YBCOCC) is most important issue in the development of superconducting power devices. In this paper, the measured results of magnetization losses under various angles of external magnetic field in BSCCO tape stacked conductors and YBCO CC stacked conductors are presented and compared with each other. Also, we present the compared results of magnetization losses measured at arbitrary reaction magnetic fields and analyzed with perpendicular magnetic field components of those. The results show that magnetization losses of YBCO CC single and stacked conductors agree well with the analyzed value by it's perpendicular magnetic field component, but BSCCO single and stacked conductors are not.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권12호
• /
• pp.576-585
• /
• 2005

This paper deals with the electromagnetic field analysis of slotless brushless permanent magnet machines with three different magnetization patterns such as Halbach, parallel and radial magnetization. The magnetization modeling of Halbach, parallel and radial magnetization is performed analytically. And then, analytical solutions for open-circuit field distributions, armature reaction field distributions, flux linkages due to PMs and stator windings, torque, back-emf and inductance are derived in terms of magnetic vector potential and two-dimensional (2-d) polar coordinate systems. The analytical results are validated extensively by finite element (FE) analyses. The magnet volume required in order to produce identical flux density is compared with each magnetization. Finally, analytical solutions and derivation procedures of those presented in this paper can be applied to slotless and slotted brushless permanent magnet AC and DC machines.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.72-75
• /
• 2007

Magnetization loss of HTS wire is strongly dependent on the critical current density and the aspect ration of the HTS wire. This paper presents the magnetization loss of stacked BSCCO wire and stacked YBCO wires which had different critical current densities. Width of the BSCCO wire was 4mm and widths of two YBCO wires were 4mm and 8mm. Single wire, two stacked three stacked and four stacked wires were fabricated and tested. Ratio of magnetization loss of BSCCO wire to YBCO wire was presented at single wire. For stacked wire, ratio of magnetization loss of single wire to stacked wire was presented. Test results shows that magnetization losses of stacked wires were greater than that of single wire at large high magnetic field above critical magnetic field.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.185-188
• /
• 2001

Magnetization loss of a Bi-2223 tape in magnetic fields parallel to the tape surface was measured by a magnetization method. The results indicate that the magnetization loss is hysteretic because the measured loss agrees well with calculated one from a critical state model. In the full field penetration case the magnetization loss increases with the frequency but in the partial field penetration case the influence of the frequency is opposite.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.15-17
• /
• 2002

In this paper, we analyse the dynamic characteristic of 3-phase line start permanent magnet motor considering magnetization. Magnetization vector of NdFeB is obtained from the 2-D FEM magnetization analysis. And comparing the proposed analysis with conventional analysis method, we know that it is necessary to consider magnetization in dynamic analysis.

• Journal of Magnetics
• /
• 제2권3호
• /
• pp.93-95
• /
• 1997

We investigated the temperature dependence of magnetization of Fe/Al multilayers fabricated by dc magnetron sputtering system. As the temperature increased from 5 K in a low magnetic field (100G) the magnetization of the samples increased and made a broad peak at some critical temperature. Further increase of temperature decresed the magnetization as an ardinary ferromagnetic curve. Part of samples show rapid increase of magnetization at low temperature. A model developed in this study suggests that the biquadratic coupling yields such a rapidly increasing behavior of magnetization at low temperature.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.34-39
• /
• 2013

For orthopedic artificial metal stainless steel, the magnetization of the magnetic field due to the presence of the titanium was to observe the change. Magnetic field meter (Tesla meters) a certain distance (ISO Centre) 1.5 Tesla magnetic field, the magnetization in the center with the passage of time were measured. Therefore, these artificial metal clip shape and magnetization of the sample size to produce a ferromagnetic material for comparison is the experimental dependence. For comparison of the experimental dependence of the magnetization, thereby producing a test piece size such as shaping prosthetic metal Clip is a ferromagnetic material. The experimental results, the metal orthopedic implants, there was no change in the magnetization indicated by ferromagnetic material in its natural state. However, in a magnetic field of 1.5T (Tesla), showed a sensitivity that is magnetized rapidly compared to the ferromagnetic material. In conclusion, high in the order of Clip, Stainless, of Titanium, the degree of dependence of the magnetization intensity of magnetization was the order Stainless, Titanium, of Clip in a magnetic field.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.25-29
• /
• 2021

For the application of HTS wire to AC power equipment, a conductor with high current capacity and low loss is required. CORC^®, one of the high-current conductors manufactured using several HTS wires, is made by winding the wires in a spiral on a cylindrical former. Because the magnetization loss of a CORC^® conductor depends on the degree of magnetic coupling between the wires constituting the CORC^®, it is necessary to know the value of the magnetization loss of the CORC^® itself. In order to obtain an accurate loss value, it is necessary to know the effect of the ratio of the winding pitch of the CORC^® conductor in the pickup coil region sampling the magnetization loss signal. To confirm this effect, we prepare CORC^® samples having various winding pitches, and measure and compare the magnetization losses. In addition, the magnetization loss was measured while rotating the CORC^® samples and it was examined whether there was a difference in the magnetization loss according to the rotation.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.2051-2056
• /
• 2014

함정의 탈자결과 평가를 위한 자계신호의 분리방법에 대한 이론적 근거와 해저 면에 설치되는 사각코일로부터 발생하는 불균일한 자계가 분리결과에 미치는 영향을 측정 신호와 FEM해석을 통해 검토하였다. 측정신호는 제작된 모델함에서 발생하는 자계를 자계센서로 측정한 것이며 FEM 계산은 제작된 모델함과 동일한 형상으로 수행되었다. ILM(induced longitudinal magnetization) 신호와 IVM(induced vertical magnetization) 신호는 함정이 가지는 투자율과 지자계의 수평과 수직방향 성분에 의해 각각 발생하는 자화에 의한 것이며, PLM(permanent longitudinal magnetization) 신호와 PVM(permanent vertical magnetization) 신호는 함정의 영구자화의 수평성분과 수직성분에 의한 것임이 확인되었다. 또한 사각 코일의 수직방향의 자계는 균일한 지자계를 완전히 상쇄할 수 없어 사각코일의 면적에 가까운 크기를 가지는 함정 일수록 사각코일의 자계 불균일성의 영향을 크게 받게 됨을 알았다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권3호
• /
• pp.118-123
• /
• 1999

This paper describes the finite element procedure including the magnetic hysteresis phenomena. The magnetization-dependent Preisach model is employed to simulate the magnetic hysteresis and applied to each elements. Magnetization is calculated by the Fibonacci search method for the applied field in the implementation of the magnetization-dependent model. This can calculate the magnetization very accurately with small iteration numbers. The magnetic field intensity and the magnetization corresponding to the magnetic flux density obtained by the finite element analysis(FEA) are computed at the same time under the condition that these balues must satisfy the constitutive equation. In order to reduce the total calculation cost, pseudo-permeability is used for the input for the FEA. It is found that the presented method is very useful in combining the hysteresis model with the finite element method.