• Journal of Magnetics
• /
• 제22권1호
• /
• pp.65-68
• /
• 2017

This paper reports simulation and evaluation of the magnetic flux density (MFD) of a rotating Halbach magnet (RHM) composed of a rotating inner Halbach cylinder (HC) and a fixed outer HC. We first chose the dimension of a single HC, then determined the dimensions of an inner and outer HC to get MFD = 2 T. Simulation results were used to guide fabrication of an RHM; its magnetic field in the central axis direction agreed well with simulated values.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.1-8
• /
• 2013

This paper reviews the development status of magnetic refrigeration system for hydrogen liquefaction. There is no doubt that hydrogen is one of most important energy sources in the near future. In particular, liquid hydrogen can be utilized for infrastructure construction consisting of storage and transportation. Liquid hydrogen is in cryogenic temperatures and therefore high efficient liquefaction method must be studied. Magnetic refrigeration which uses the magneto-caloric effect has potential to realize not only the higher liquefaction efficiency > 50 %, but also to be environmentally friendly and cost effective. Our hydrogen magnetic refrigeration system consists of Carnot cycle for liquefaction stage and AMR (active magnetic regenerator) cycle for precooling stages. For the Carnot cycle, we develop the high efficient system > 80 % liquefaction efficiency by using the heat pipe. For the AMR cycle, we studied two kinds of displacer systems, which transferred the working fluid. We confirmed the AMR effect with the cooling temperature span of 12 K for 1.8 T of the magnetic field and 6 second of the cycle. By using the simulation, we estimate the total efficiency of the hydrogen liquefaction plant for 10 kg/day. A FOM of 0.47 is obtained in the magnetic refrigeration system operation temperature between 20 K and 77 K including LN2 work input.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.991-992
• /
• 2007

This paper presents high efficiency IPMSM design for compressor of refrigerator having main operation speed of 1800rpm and 3600rpm. The characteristics of IPMSM greatly vary according to back-EMF and inductance. Therefor the design is to estimate the range of back-EMF and inductance satisfying the requirements of IPMSM in the initial design. Thereafter the optimization is performed to consider magnetic saturation and reduce torque ripple. In the end the validity of the design process proposed in this paper is verified by test.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.294-298
• /
• 2013

A FeRh alloy is a well-known efficient magnetocaloric material and some experimental and theoretical studies of bulk FeRh have been reported already by several groups. In this study we report first-principles calculations on magnetic properties of different thickness FeRh thin films in order to investigate the possibility to enhance further the magnetocaloric efficiency. We used two methods of a Vienna Ab-initio Simulation Package (VASP) code and SIESTA package. We found that the FeRh thin films have quite different magnetic properties from the bulk when the thickness is thinner than 6-atomic-layers. While bulk FeRh has a G-type antiferromagnetic(AFM) state, thin films which are thinner than 6-atomic-layers have an A-type AFM state or a ferromagnetic (FM) state. We will discuss possibility of magnetic phase transitions of the FeRh thin films in the view point of a magnetocaloric effect. And we found 4-, 5-, 6-layers films with Fe surface and 7-layers film with Rh surface are FM and they have relatively small magnetocrystalline anisotropy (MCA) energy about less than 70 meV. The small MCA energy leads to reduction of the strength of magnetic field in operating a magnetic refrigerator.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1064-1070
• /
• 2010

In this work, a dynamic absorber with a plate-type cantilever using magnetic force is proposed to reduce the vibration of a compressor directly. The dynamic absorber using magnetic force has some advantages of easily tuning the control frequency by adjusting the magnet spacing and obtaining wider control frequency band. The dynamic absorber is designed theoretically and tested experimentally to estimate the control frequency band. When the compressor is equipped with the dynamic absorber, the vibration of compressor and the noise level of refrigerator are reduced by 30 % and 3.2 dB respectively.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.71-75
• /
• 2012

For the practical application of a YBCO superconductor bulk magnet, the superconductor bulk magnet with strong and stable magnetic field on a large area surface should be fabricated. To satisfy these requirements, we have designed a conduction-cooled bulk magnet system using six single grain YBCO bulk superconductors. Six rectangular-shaped YBCO bulk superconductors with a dimension of $38{\times}38{\times}15mm^3$ were field-cooled at 20 K using a superconductor magnet with maximum operating magnetic field of 4 T. The magnetic flux of 3.0 T and 2.8 T were achieved on the surface of bulk superconductors and over the vacuum chamber surface of the refrigerator, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.857-860
• /
• 2006

It is important to diminish noise source of an electric motor used in appliances. We studied on the noise reduction of BLDC motor to drive a fan. Especially, this study was focused on detent torque caused by interaction between a permanent magnet of rotor and groove in stator. This source and rotating system brought about a resonance. This paper showed that the higher harmonic component of this torque had a main factor to lessen noise. So, we had designed new magnets with shape like a peanut and pseudo-sinusoidal flux density for low-noise BLDC motor in refrigerator.

• 조명전기설비학회논문지
• /
• 제21권3호
• /
• pp.125-131
• /
• 2007

가전분야에서의 전동기 효율향상을 통한 에너지 소비절감 효과는 상당히 크지만 이를 위한 전동기의 설계/해석 기술 확보가 아직은 미흡한 상태이다. 이에 따라 유도형 동기전동기가 제안되었지만, 유도형 동기 전동기는 유도전동기와 통기전동기의 특성을 동시에 가지고 있어, 해석 및 설계가 쉽지 않다. 따라서 본 논문에서는 기존의 냉장고 압축기용 전동기인 단상유도전동기를 대처할 수 있는 단상 유도형 동기전동기를 이용해 파라미터에 따라 특성이 어떻게 바뀌는가에 대해 서술하였다. 그에 따라 단상유도전동기의 정상상태 특성을 해석하고 제안모델의 성능을 기존모델과 비교하고 실험하여 해석결과의 신뢰성을 검증한다. 또한 본 논문에서는 제안모델의 기존 고정자 형상이나 권선 스팩을 유지하고 회전자의 형상이나 구조만을 변경시켜 성능향상을 도모하였다. 해석방법으로는 전자장 수치 해석적인 방법으로 널리 이용되고 있는 유한요소법(Finite Element Method : FEM)을 이용하였다.

• Journal of Radiation Protection and Research
• /
• 제38권3호
• /
• pp.132-137
• /
• 2013

기존에 많이 사용된 반도체 검출기의 분해능은 통계학적 이론으로 그 분해능의 한계가 따른다. 이러한 이유로 최근에 반도체 검출기가 갖는 에너지 분해능의 한계를 뛰어넘는 저온 검출기를 이용하여 다양한 방사성 핵종 분석을 시도하고 있다. 본 논문에서는 $2{\times}2{\times}0.05mm^3$ 크기 금막 흡수체에 입사하는 에너지 때문에 흡수체의 온도가 상승하는 원리를 이용해 $^{241}Am$ 알파 선원의 에너지를 측정하였다. 흡수체의 온도 변화 측정에는 자기양자센서인 Au:Er를 이용하였으며 이는 순수한 Au에 핵스핀이 0 인 $^{168}Er$을 수백 ppm을 첨가하여 얻은 상자성 합금이다. 알파 입자 흡수에 의한 미세한 온도증가를 측정하기 위해서 희석식 냉동기보다 작동이 편리한 무냉매 자기냉동기를 이용해 mK 온도 영역의 저온환경을 구성하였다. $^{241}Am$ 선원 측정 결과 5.5 MeV에서 6.8 keV의 FWHM의 에너지 고 분해능을 얻었다.