• 한국자기학회지
• /
• 제23권2호
• /
• pp.54-61
• /
• 2013

강자성체는 자구들의 상호작용으로 인해 잔류 자화가 남게 되는데, 전자전기 산업 및 국방 피탐지 분야에서는 이러한 잔류 자화량을 정밀하게 0으로 만드는 탈자기법이 요구된다. 하지만 현재 수행되는 탈자기법들은 경험과 실험에 의존한 방법들로, 새로운 재료의 개발에 따른 효율적인 탈자를 위해서는 강자성체의 히스테리시스 곡선을 반영한 탈자기법이 필요하다. 본 논문에서는 자성체의 물성적인 성질을 기반으로 정립된 Preisach 모델링 기법을 이용하여 Anhysteretic Deperm, Deperm-ME, Flash-Deperm에 따른 2차원 유한요소해석을 수행하였다. 탈자 전류에 의한 자기이력궤적의 분석을 통해 강자성체의 히스테리시스 곡선과 탈자 변수의 관계를 고찰하였으며, 이로써 탈자에 효율적인 전류 감소 형태를 제시하였다.

• 접착 및 계면
• /
• 제14권2호
• /
• pp.82-87
• /
• 2013

본 연구에서는 레졸, 질산철 그리고 트리블럭 공중합체를 이용하여 직접 탄화과정에 의해 자성체 나노입자가 분산된 탄소나노세공체를 합성하였다. 나노세공 마그네타이트/카본($Fe_3O_4$/carbon) 나노복합체는 낮은 마그네타이트 함량(1 wt%)을 가지고 잘 배열된 이차원적 육방체 구조(p6mm)를 보이며, 균일한 세공크기(3.6 nm), 높은 표면적(635 $m^2/g$)과 세공부피(0.48 $cm^3/g$)를 가진다. 작은 입자크기(10.2 nm)를 가지는 마그네타이트 나노입자는 초상자기성(7.7 emu/g)을 보이고 탄소 세공벽 내에 잘 분산되었다. 나노세공 마그네타이트/카본 물질은 최대 995 mg/g의 아이부프로펜 흡착량을 보였다. 또한, 자석을 이용하여 용액과 나노세공 마그네타이트/카본 물질의 분리가 용이하였다. 본 연구에서 제조된 나노복합체는 우수한 아이부프로펜 흡착제로 작용하였다.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.432-436
• /
• 2016

We investigate the microstructural and magnetic property changes of $DyH_2$, $Cu+DyH_2$, and $Al+DyH_2$ diffusion-treated NdFeB sintered magnets with the post annealing (PA) temperature. The coercivity of all the diffusion-treated magnets increases with increasing heat treatment temperature except at $910^{\circ}C$, where it decreases slightly. Moreover, at $880^{\circ}C$, the coercivity increases by 3.8 kOe in Cu and 4.7 kOe in Al-mixed $DyH_2$-coated magnets, whereas this increase is relatively low (3.0 kOe) in the magnet coated with only $DyH_2$. Both Cu and Al have an almost similar effect on the coercivity improvement, particularly over the heat treatment temperature range of $790-880^{\circ}C$. The diffusivity and diffusion depth of Dy increases in those magnets that are treated with Cu or Al-mixed $DyH_2$, mainly because of the comparatively easy diffusion path provided by Cu and Al owing to their solubility in the Nd-rich grain boundary phase. The formation of a highly anisotropic $(Nd,\;Dy)_2Fe_{14}B$ phase layer, which acts as the shell in the core-shell-type structure so as to prevent the reverse domain movement, is the cause of enhanced coercivity of diffusion-treated Nd-Fe-B magnets.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.257-262
• /
• 2017

본 논문에서는 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나에 하프 커팅과 불연속 급전 구조를 적용하여 안테나 특성을 확인하였다. 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나를 자기 대칭 라인을 중심으로 하프커팅을 하고, 급전부에 불연속 구조를 적용과 이중 슬리브 간격을 조정하여 임피던스 매칭을 하였다. 안테나 파라미터 특성을 확인하기 위하여 ANSYS사의 HFSS 시뮬레이터를 이용하였고, 안테나 크기는 $21{\times}40mm^2$이다. 제안한 안테나에서 VSWR이 2 이하인 시뮬레이션 주파수 대역은 2.6GHz~10.25GHz이다. 주파수 대역폭은 7.65GHz이다. 실제로 제작한 안테나의 주파수 대역은 3.3GHz~9.75GHz이며, 주파수 대역폭은 6.45GHz이다. 측정된 복사패턴 주파수는 3.5GHz, 5.5GHz, 7.5GHz, 9.5GHz이다. 모든 주파수에서 다이폴안테나 패턴과 유사한 복사패턴 결과를 얻을 수 있었다.

• 한국자기학회지
• /
• 제6권2호
• /
• pp.73-79
• /
• 1996

Y형 육방정 산화철$(Ba_{2}Me_{2}Fe_{12}O_{22}:Me=천이금속)$은 천이 금속으로 Co와 Zn가 포함된 경우 양호한 고주파 특성을 보이는 것으로 알려져 있다. 따라서, 결정 구조 내에 이들의 분포 상태를 파악하는 것이 중요하다. 본 논문에서는 엄밀한 성분 분석, X-선 회절 분석, 자기 특성 분석을 통하여 확인된 $Co_{2}Y$와 $Co_{1.6}Zn_{0.4}Y$시료에 대한 $M\"{o}ssbauer$ 분광 분석 결과로부터 다음과 같은 결론을 제시하였다. (1) Co는 주로 육방정 산화철의 S-block에 위치한 4배위 자리 $(6c_{IV})$와 S-, T-block 경계의 6배위자리(18h VI)에 들어간다. (2) Co의 일부를 Zn으로 치환하여도, Fe의 분포에는 큰 영향을 미치지 않는다.

• 한국자기학회지
• /
• 제15권1호
• /
• pp.21-24
• /
• 2005

강자성, 초거대자기저항체인 $La_{0.67}Sr_{0.33}MnO_{3}$ 타겟을 이용하여 248nm의 파장을 갖는 KrF 엑시머 레이저를 사용한 PLD법으로 박막으 제작하고, 강유전체 물질인 $PbZr_{0.52}Ti_{0.48}O_{3}$ 물질을 spin coating 방법으로 제조하였다. Pt 기관(111)위에 125 mtorr의 산소분압으로 증착한 rhombohedral 구조를 갖는 LSMO 박막을 증착하고 그 위에 PZT 물질을 증착한 결과 LSMO, PZT en 물질 모두 단일상으로 [111]방향으로서의 성장하였음을 알 수 있었다. AFM(atomic force micrscope) data 및 SEM(scanning electron microscope) data를 바탕으로 매우 균질한 박막을 얻었음을 알 수 있었으며, 이때의 자기적 성질 및 전기적 성질은 각각 강자성적인 성질 및 강유전체적인 성향을 나타내었다. 이러한 결과를 가지고 박막증착에 있어서 서로간의 결정구조가 미치는 영향과 다른 경향에 대한 조절이 가능함을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권2호
• /
• pp.36-41
• /
• 2014

Temperature dependence of magnetic moment (m-T) and the magnetization (M-H) at 5 K and 20 K of the in situ processed $MgB_2$ bulk pellets with/without carbon (C) doping were examined. The superconducting critical temperature ($T_c$), the superconducting transition width (${\delta}T$) and the critical current density ($J_c$) were estimated for ten test samples taken from the $MgB_2$ bulk pellets. The reliable m-T characteristics associated with the uniform $MgB_2$ formation were obtained for both $MgB_2$ pellets. The $T_cs$ and ${\delta}Ts$ of all test samples of the undoped $MgB_2$ were the same each other as 37.5 K and 1.5 K, respectively. The $T_cs$ and ${\delta}Ts$ of the C-doped $MgB_2$ were 36.5 K and 2.5 K, respectively. Unlike the m-T characteristics, there existed the difference among the M-H curves of the test samples, which might be caused by the microstructure variation. In spite of the slight $T_c$ decrease, the C doping was effective in enhancing the $J_c$ at 5 K.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.32-40
• /
• 2001

This paper presents the detailed statistics on radiation field signatures associated with multiple-intracloud lightning discharges. A transient signal recording system was used to measure the electric and magnetic fields produced by lightning flashes. The measurements were made in th summers of 1995 through 1999, and the location of the observation station was in Inchon on the coast of the Yellow Sea in Korea(37$^{\circ}$25'N, 126$^{\circ}$ 39'E). Most of lightning flashes typically contains between two and five strokes. The individual intracloud stork radiation fields were the bipolar pulse. On the average, the ratio of the peak of the second stroke to the first stroke peak was 75.1$\pm$40.1% for the negative, and a fraction of the subsequent stroke peaks were higher than the first stroke peak. The greater the number of the subsequent stroke order, less time separations between strokes were produced. The mean of the depth of the dip was 81.2$\pm$27.9% for the positive polarity and 75.9$\pm$24.4% for the negative. The depth of the dip increased for the positive bipolar pulses and decreased for the negative as the number of the stroke order increased.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.373-379
• /
• 2002

We investigated the evolution of magnetoresistance and magnetic property of tunneling magnetoresistive(TMR) device with microstructure and plasma oxidation time. TMR devices have potential applications for non volatile MRAM and high density HDD reading head. We prepared the tunnel magnetoresistance(TMR) devices of Ta($50{\AA}$)/NiFe($50{\AA}$)/IrMn($150{\AA}$)/CoFe($50{\AA}$)/Al($13{\AA}$)-O/CoFe($40{\AA}$)/FiFe($400{\AA}$)/Ta(($50{\AA}$) structure which have $100{\times}100\mu\textrm{m}^2$ junction area on $2.5{\times}2.5\textrm{cm}^2$ Si/$SiO_2$(($1000{\AA}$) substrates by an inductively coupled plasma(ICP) magnetron sputter. We fabricated the insulating layer using an ICP plasma oxidation method by with various oxidation time from 30 sec to 360 sec, and measured resistances and magnetoresistance(MR) ratios of TMR devices. We found that the oxidized sample for oxidation time of 80 sec showed the highest MR radio of 30.31 %, while the calculated value regarding inhomogeneous current effect indicated 25.18 %. We used transmission electron microscope(TEM) to investigate microstructural evolution of insulating layer. Comparing the cross-sectional TEM images at oxidation time of 150 sec and 360 sec, we found that the thickness and thickness variation of 360 sec-oxidized insulating layer became 30% and 40% larger than those of 150 sec-oxidized layer, repectively. Therefore, our results imply that increase of thickness variation with oxidation time may be one of the major treasons of the MR decrease.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.282-286
• /
• 2000

In this paper, magneto-rheological(MR) damper is studied for vibration control of large infra structures under earthquake. Generally, active control devices need a large control force and a high power supply system to reduce the vibration effectively. Large and miss tuned control force may induce the dangerous situation such that the generated large control force acts to amplify the structural vibration. Recently, to overcome the weaknesses of the active control, the semi-active control method is suggested by many researchers. Semi-active control uses the passive control device of which the characteristics can be modified. Control force of the semi-active device is not generated from the actuator with power supply. It is generated as a dynamic reaction force of the device same as in the passive control case, so the control system is inherently stable and robust. Unlike the case of passive control, control force of semi-active control is adjusted depending on the measured response of the structure, so the vibration can be reduced more effectively against various unknown environmental loads. Magneto-rheological(MR) damper is one of the semi-active devices. Dynamic characteristics of the MR material can be changed by applying the magnetic fields. So the control of MR damper needs only small power. Response time of MR to the input voltage is very short, so the high performance control is possible. MR damper has a high force capacity so it is adequate to the vibration control of large infra structure. Because MR damper has a nonlinear property, normal control method used in active control may not be effective. Clipped optimal control, modified bang-bang control etc. have been suggested to MR damper by many researchers. In this study, sliding mode fuzzy control(SMFC) is applied to MR damper. Genetic algorithm is used for the controller tuning. To verify the applicability of MR damper and suggested algorithm, numerical simulation on the aseismic control is carried out. Simulation model is three-story building structure, which was used in the paper of Dyke, et al. The control performance is compared with clipped optimal control. The present results indicate that the SMFC algorithm can reduce the earthquake-induced vibration very effectively.