• Progress in Superconductivity and Cryogenics
• /
• v.8 no.2
• /
• pp.11-16
• /
• 2006

Critical current densities were measured for a bicrystalline $(Sm_{0.8}Dy_{0.2})Ba_2Cu_3O_7$ film under various magnetic fields $({^{\rightarrow_{H}}}_a)$. The fields were varied from -0.7KOe to +0.7KOe for various orientations with respect to the film surface. The curves of the critical current densities $(J_{cb})\;vs\;{^{\rightarrow_{H}}}_a$ showed the well known butterfly-like hysteretic curves. Our data could be analyzed for the two components of field, which are normal and parallel to the film surface, respectively. We combined the effect of $H_\perp$ deduced from the data for the normal field $(\theta=90^{\circ})$ and the effect of $H_\parallel$ deduced from the data for the almost parallel field $(\theta=2^{\circ})$. Our analyses indicate that $(J_{cb})$ depends on the two components of flux density at the grain boundary. All the experimental data for various ${\theta}s$ fit well to this new formula which was obtained by multiplying the factors deduced from the field dependences of these two components.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.224-230
• /
• 1998

The relationships between R-H curves of gaint magnetoresistance (GMR) spin valve trilayer films and M-H curves of each magnetic layer consisting of the trilayer films were analyzed and simple formula representing the relations between the curves were suggested for theoretical analysis and study of magnetoresistance (MR) in those films, especially where the MR is from the difference of coercivity. Using two kinds of NiFe/Cu/Co films, which had been deposited on Cu(50 $\AA$)/Si(111, 4$^{\circ}$ tilt-cut) and Cu(50 $\AA$)/glass, R-H and M-H curves were measured and compared with the calculated ones, which were obtained by appying the M-H curves of single NiFe and Co films, deposited on the same substrates, to the previously reported single-domain and multi-domain models. The calcuated ones were well consistent with the measured ones and the suggested simple relationships between R-H and M-H curves are thought to be very useful for the deep understanding of MR behavior and the reasonable approach to improve MR properties in GMR spin valve trilayer films.

• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.1-21
• /
• 1997

We have obtained theoretical calibration curves to convert the amount of polarization into the strength of magnetic field, by a numerical calculation of radiation transfer for the polarized spectral line of FeI $6303{\AA}$. In our calculation, three kinds of atmospheric models (VAL-C, penumbra, umbra) have been used to make a proper calibration for an active region composed of quiet, penumbral and umbral areas. It was found that firstly, the results of our calculation depend highly on a kind of atmospheric model rather than on any other input parameters used in a model. Secondly, observed line profile showed m solar spectrum atlas proved to be very similar to the calculated profiles obtained by using a penumbra model. Finally, another method except this calibration curve should be developed to estimate correctly the distribution of magnetic field in solar active region from the observation of polarized spectral line.

• 전기의세계
• /
• v.28 no.2
• /
• pp.68-75
• /
• 1979

The penetration of an electro-magnetic wave through an aperture in a cylindrical structure with a center dielectric-rod is investgated. By using a standard mode matching procedure, the electrical and magnetic fields in a cavity are determined as a function of position inside the cavity and frequency of the incident field. For the given parameters, computed data are obtained and the results exhibited in form of amplitude curves of the nor malized field and energy densities of functions of position and frequency. Depending on the increase of the relative dielectric constant of center dielectric-rod, the resonance frequecies of the cavity vary as the cavity size decrease. The stored electro-magnetic energy varies very rapidly as a function of position inside the cavity and of the source frequency. Its peak value can be two orders of magnitude greater than the incident energy density. The frequencies where the peaks occur can be identified approximately as the resonance frequencies of the cavity.

• Journal of Magnetics
• /
• v.15 no.4
• /
• pp.185-189
• /
• 2010

Spin polarized tunneling through a hybrid tunnel barrier of a Spin filter (SF) based on a EuO ferro-magnetic semiconductor and an organic semiconductor (OSC) (rubrene in this case) was investigated. For quasi-magnetic tunnel junction (MTJ) structures, such as Co/rubrene/EuO/Al, we observed a strong spin filtering effect of the EuO layer exhibiting I-V curves with high spin polarization (P) of up to 99% measured at 4 K. However, a magnetoresistance (MR) value of 9% was obtained at 4.2 K. The low MR compared to the high P could be attributed to spin scattering caused by structural defects at the interface between the EuO and rubrene, due to nonstoichiometry in the EuO.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1043-1045
• /
• 2004

This paper deals with the core loss calculation of a BLDC motor made of Soft Magnetic Composite material. Since the teeth of motor partially have overhang in axial direction, 3 - dimensional equivalent magnetic circuit network (3D-EMCN) is used as an analytical method to get flux density of each element. The total core loss is calculated with the magnetic flux density and core loss curves of the SMC material. The calculated result is compared with core loss of the motor without overhang in stator teeth.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.404-407
• /
• 1995

Magnetic properties of model exchange-spring magnets, which are composed of magnetically soft and hard grains, were calculated by means of computer simulation. The dependence of the magnetic properties on the strength of intergrain exchange interaction and the amount of soft grains was studied. The existence of soft grains enhanced the remanence remarkably, and the remanence over $0.8M_{s}$ was obtained in the model magnets containing 25% or more soft grains by volume. The calculated coercivity vs. the strength of the exchange interaction curves showed a peak at a critical strength of the exchange interaction, although the remanence increased monotonously with increase in the strength of the exchange interaction. Thus the maximum energy product also reached a peak around the same critical strength. The calculated maximum energy product exceeded $300kJ/m^{3}$ when the magnet is assumed to be composed of $Fe_{3}B$ and $Nd_{2}Fe_{14}B$.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.173-176
• /
• 1999

Errors of saturation magnetization and magnetocrystalline anisotropy constant determined by magnetization curve of magnetically aligned unixial power were analyzed. In case of alignment factor ${\Theta}_0=10{\circ}$, magnetic constant errors of $Nd_2Fe_{14}B$ were calculated to be error of $M_S{\risingdotseq}1{\%}\;and\;error\;of\;K_1{\risingdotseq}13\;{\%}$, respectively, and magnetic constant errors of Ba-ferrite were calculated to be error of $M_S{\risingdotseq}1{\%}\;and\;error\;of\;K_1{\risingdotseq}17\;{\%}$. In this method, $M_s$ was found to be determined with high accuracy. High alignment is desirable for high accuracy.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.322-329
• /
• 2016

In this paper, we propose an array sensing detection method for smelting of submerged arc furnaces (SAF) based on electromagnetic radiation. AC magnetic field generated by electrode currents and molten currents in the furnace is reflected outside of the furnace. According to the spatial distribution of electromagnetic field a radiation model of SAF is built. We design a 3D magnetic field sensing array system in order to collect the magnetic field information. Through the collected information, the current distribution characteristics of SAF are described and the key parameters of smelting are obtained. Theoretical simulation and field test show that the curves acquired by the sensing array can accurately reflect the information of the relative displacement when the relative displacement between the array and electrode is 10 cm. Compared with the detection method of 3D single point, the proposed array sensing method of magnetic field obtains better results in terms of real-time and accuracy, and has good practical value for industrial measurement.

• Korean Journal of Materials Research
• /
• v.28 no.3
• /
• pp.159-165
• /
• 2018

In order to increase the efficiency of the sputtering method widely used in thin film fabrication, a dc sputtering apparatus which supplies both high frequency and magnetic field from the outside was fabricated, and cobalt thin film was fabricated using this apparatus. The apparatus can independently control the applied voltage, the target-substrate distance, and the target current, which are important parameters in the sputtering method, so that a stable glow discharge is obtained even at a low gas pressure of $10^{-3}$ Torr. The fabrication conditions using the sputtering method were mainly performed in $Ar+O_2$ mixed gas containing about 0.6 % oxygen gas under various Ar gas pressures of 1 to 30 mTorr. The microstructure of Co thin films deposited using this apparatus was examined by electron diffraction pattern and X-ray techniques. The magnetic properties were investigated by measuring the magnetization curves. The microstructure and magnetic properties of Co thin films depend on the discharge gas pressure. The thin film fabricated at high gas pressure showed a columnar structure containing a large amount of the third phase in the boundary region and the thin film formed at low gas pressure showed little or no columnar structure. The coercivity in the plane was slightly larger than that in the latter case.