• 대한기계학회논문집A
• /
• 제40권11호
• /
• pp.943-948
• /
• 2016

최근, 산업에서는 미세패턴의 효과가 입증됨에 따라 미세패턴에 대한 연구가 활발히 진행되고 있다. 그러나, 이러한 연구들은 단일 패턴에 집중되어있으며, 복합 미세패턴의 제작 및 디버링에 관한 연구는 부족한 실정이다. 따라서, 본 연구에서는 원통형 공작물에 복합 미세패턴을 제작하고, 자기 디버링을 이용하여 디버링을 실시하였다. 또한, 반응표면법을 이용하여 패턴의 높이에 대한 예측모델을 도출하고, 자기 디버링 공정을 최적화하였다. 그 결과, 패턴의 높이에 대한 예측값과 실험값을 비교하였을 때, 평균적으로 7%의 오차가 발생하는 것을 확인하였다. 또한, 검증실험을 통하여 형상 정밀도가 우수한 복합 미세패턴의 제작이 가능하고, 예측모델이 신뢰성이 있음을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.198-201
• /
• 2002

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, a slurry circulation system was designed and manufactured. Its finishing characteristics was experimently investigated by various effective factors such as dry, water flow, oil flow with a slurry. From the experimental results, it was found that the materal removal and surface roughness were good in oil flow with slurry. The slurry circulation system is effective on the internal finishing of non-ferromagnetic pipe(SUS304).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.319-320
• /
• 2008

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.39-48
• /
• 2005

As the industrial development is accelerated, a new machining process and system are keenly required to achieve super precision surface finish. Especially to get ground surface finish fer complicated and narrow inner shape of molds, it is impossible with the existing methods so that a new method is being required to be developed. A new material, called Magic(MAGnetic Intelligent Compounds), is finally made and it is called Magic machining that uses this material. There is a way to make a material as follows, the mixture of magnetic particles, bonding material and particles of abrasive grain should be melt down by proper heat, and then this mixture put in a mold and cool down in magnetic field which has a uniform direction. This new polishing method is spotlighted as an excellent solution to the existing problems. However it hasn't reported any study about the influence of the machining conditions of polishing velocity, amplitude and polishing pressure to the surface roughness yet. This study would examine closely the influence of polishing conditions of the Magic polishing tool to the surface finish to decide the optimum polishing condition and to standardize the Magic polishing work.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.22-28
• /
• 2009

In order to optimize the polishing process, Run to Run control scheme has been applied to the micro mold polishing in this study. Also, to fully understand the effect of parameters on the surface roughness a design of experiment is performed. By linear approximation of main factors such as gap and rotational speed of micro quill, EWMA (Exponential Weighted Moving Average) gradual mode controller is adopted as a optimizing tool. Consequently, the process converged quickly at a target value of surface roughness Ra 10nm and Rmax 50nm, and was hardly affected by unwanted process noises like initial surface quality and wear of magnetic abrasives.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.190-195
• /
• 1997

The requirement of precision products about difficult-to-cut materials such as Cu and Aluminum alloy is becoming more and more. Because of soft materials, the exist narrow groves on surface are difficult to gotten off even on the polishing stage. It has been proved that Magnetic-Electrolytic-Abrasive Polishing (MEAP) is a efficient method to resolve this problem by using the nonwoven-abrasive pads together [1, 2]. In this study, through the experiments, their machining properties of newly developer polishing material of SiC, Al2O3 and diamond nonwoven abrasive pads have been proved. Through the experiments, the optimal machining conditions on larger cylinder shape workpiece of Cu and Aluminium alloy have been found, through the Taguchi[3] method the optimal machining conditions can be selected.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.34-41
• /
• 2004

A new method to fabricate the fine magnetic abrasives by using mechanical alloying is proposed. The mechanical alloying process is a solid powder process where the powder particles are subjected to high energetic impact by the balls in a vial. As the powder particles in the vial are continuously impacted by the balls, cold welding between particles and fracturing of the particles take place repeatedly during the ball milling process using a planetary mill. After the manufacturing process, fine magnetic abrasives which the guest abrasive particles c lung to the base metal matrix without bonding material can be obtained. The shape of the newly fabricated fine magnetic abrasives was investigated using SEM and its polishing performance was verified by experiment. It is very helpful to finishing the injection mold steel in final polishing stage. The areal ms surface roughness of the workpiece after several polishing processes has decreased to a few nanometer scales.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.387-388
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.141-142
• /
• 2010

• 대한기계학회논문집A
• /
• 제39권9호
• /
• pp.923-928
• /
• 2015

본 논문에서는 고경도의 재료를 효과적으로 가공하기 위하여 초음파-자기연마 복합가공을 제시하고, 초음파-자기연마 복합가공의 효율성을 검증하기 위해. 실험계획법을 적용하여 각 인자의 영향력을 평가하였다. 그 결과, 기존의 자기연마가공보다 초음파-자기연마가공의 가공효율이 더 높게 나타났으며, 초음파-자기연마 복합가공에서 가장 적절한 주파수는 28kHz 인 것으로 나타났다. 또 표면거칠기에 대한 인자의 영향을 평가하였을 때, 초음파의 진폭이 가장 큰 영향을 미치는 것을 확인하였다. 그러나 $55{\mu}m$ 의 진폭이 적용되었을 때, 자속밀도의 변화에도 불구하고 가공효율이 오히려 떨어지는 것으로 나타났다. 이러한 결과로부터 지나치게 큰 초음파 진폭은 오히려 자기연마가공의 효과를 저하시키는 것임을 알 수 있었다.