• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.927-934
• /
• 2020

Magnesium powder has been widely used in various industries because it is light weight and extremely high mechanical strength including aeronautics and chemicals. However, magnesium, as a combustible metal, poses serious safety issues such as fires and explosions if it is not managed properly. Especially, magnesium's max adiabatic flame temperature is 3,340℃ and it is impossible to extinguish it by using water, CO2 and Halonagents. The aim of this study is to identify the combustion characteristics of magnesium powder. We carried out a combustion experiment, using 1 kg of magnesium (purity > 99 %, particle < 150 ㎛). The features of the magnesium burning process were scrutinized using infrared thermal image analysis. Also, a field-emission scanning electron microscope (FE-SEM) were used employed to analyze particulate composites and properties. It concludes the significant tendency of magnesium fire and light, combustion carbide's particle characteristics. This study contributes to make better prevention and response manners to magnesium fires, as well as fire investigation measures.

• Journal of Powder Materials
• /
• v.19 no.5
• /
• pp.356-361
• /
• 2012

The ultra-fine and less agglomerated titanium carbonitride particles were successfully synthesized by magnesiothermic reduction with low feeding rate of $TiCl_4+1/4C_2Cl_4$ solution. The sub-stoichiometric titanium carbide ($TiC_{0.5{\sim}0.6}$) particles were produced by reduction of chlorine component by liquid magnesium at $800^{\circ}C$ of gaseous $TiCl_4+1/4C_2Cl_4$ and the heat treatments in vacuum were performed for 5 hours to remove the residual magnesium and magnesium chloride mixed with produced $TiC_{{\sim}0.5}$. The final $TiC_{{\sim}0.5}N_{0{\sim}0.5}$ particle with near 100 nm in mean size and high specific surface area of $65m^2/g$ was obtained by nitrification under nitrogen gas at $1,150^{\circ}C$ for 2 hrs.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.659-667
• /
• 1997

The effect of calcination temperature of Mg(OH)2 on the green density and densification of MgO was investigated. It was observed that the impure magnesium hydroxide powder showed a higher crystallization rate while it had a lower tendency of agglomeration between periclae crystallites, as compared to that of the pure magnesium hydroxide powder. In the case of calcination of the powders under 85$0^{\circ}C$, the impure powder showed the higher green and sintered density. In spite of higher green density upon the calcination over 100$0^{\circ}C$, the impure powder showed the lower sintered density, caused by exaggerated growth of the periclase crystallites. The highest sintered densities in the both powders were obtained at the calcination temperature of 100$0^{\circ}C$. And the green density was inversely proportional to the sintered density at the calcination over 100$0^{\circ}C$.

• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.454-461
• /
• 2011

In this study, the relationship between corrosion resistance and microstructural characteristics such as grain size reduction, preferred orientation, and homogenous distribution of elements and impurity by mechanical milling of magnesium powder was investigated. Mechanical milling of pure magnesium powder exhibited a complex path to grain refinement and growth together with preferred orientation reversal with milling time. It was also found that anisotropic formation of dislocation on the basal plane of magnesium was initially the dominant mechanism for grain size reduction. After 60 hrs of milling, grain coarsening was observed and interpreted as a result of the strain relaxation process through recrystallization. In spite of the finer grain size and strong (002) texture developed in the sample prepared by spark plasma sintering at $500^{\circ}C$ for 5 min after mechanical milling for 2hrs, the sample showed a higher corrosion rate. The results from this study will be helpful for better understanding of the controlling factor for corrosion resistance and behaviors of mechanical milled magnesium powders.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.678-683
• /
• 2011

The effects of coagulant types (magnesium chloride, calcium chloride, calcium sulfate, glucono-${\delta}$-lactone) on yield, quality properties and storability of astringent persimmon powder added tofu were investigated. Yield, hardness, chewness, crispness, and overall acceptability of tofu coagulated by glucono-${\delta}$-lactone were higher than those coagulated by the others. L value, a value, pH, soaking-solution turbidity, and total aerobic bacteria of glucono-${\delta}$-lactone coagulated tofu were lower than those coagulated by the others. Calcium sulfate and calcium chloride coagulated tofu showed relatively high L and b values. Magnesium chloride coagulated tofu had higher sensory score for firmness, taste, overall acceptability than calcium chloride and calcium sulfate coagulated tofu, but there was no significant difference between magnesium chloride and glucono-${\delta}$-lactone. The results suggested that glucono-${\delta}$-lactone and magnesium chloride were found to be the suitable coagulants for processing of the persimmon powder added tofu.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.156-157
• /
• 2015

Recently, the trend for structure is being changed from wall construction to rhamen construction. rhgamen construction reduces floor noise and selfweight in structures. The amount of lightweight panels used in rhamen construction is also increasing. Also, Worldwide refinery industry is a large amount of sulfur is produced by develrop ment. Sulfur is resistant to freezing and thawing. Terefore, this study focuses on the density and absorption of magnesium oxide matrix that contains wood powder and pearlite to replace lightweight panel for rhamen construction. Adding pearlite 15% has the lowest density but, it has the highest absorption.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.1
• /
• pp.18-21
• /
• 1987

Influence of magnesium and calcium on the serum cholesterol concentration in rabbit blood serum was studied. The subjects were fed with the basal diet and magnesium, calcium and Korea Ginseng. The results obtained are summarized as follows: The subjects body weight fed a basal diet, magnesium, calcium and ginseng powder added did not increased, but the weight of liver was increased. Total cholesterol level of the subject fed ginseng powder 4mg. added diet group showed the lowest concentration. The subjects fed with a basal diet and magnesium/calcium(1:2) added diet showed the lower than anyother group. In case of free cholesterol and cholesterol ester, the subject fed with ginseng powder tap. magnesium/calcium(1:2) added diet showed the lowest concentration. The subjects of the lowest concentration of total cholesterol showed the lowest concentration of low density lipoprotein(LDL) and high density lipoprotein(HDL)/total cholesterol ratio was the higher level than any other group. In case of triglyceride and phospholipid, the subject fed with ginseng powder showed the triglyceride concentration gradually do creased, but phospholipid level was increased positively. In case of electrolytes, sodium and potassium of the subject fed with magnesium, calcium and ginseng powder 4mg added diet showed 120mEq/l 1 and 6.8mEq/l, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.21-25
• /
• 2001

Jeung-pyun added to mulberry leaves powder was tested to prove in inorganic ingredients, physical function, chromaticity and rheometer. For cake, mulberry leaves powder were added to rice flour in the ratio of 0%, 1%, 2%, and 3% respectively. In inorganic ingredients test, the amounts of calcium, magnesium and potassium were increased according to adding levels of mulberry leaves powder. But the amounts of iron, copper and zinc, were not correlated with it. Calcium, magnesium and potassium are anti-hypertension inorganic substances. Thus, it is considered that food with plenty amountsz of inorganic ingredients is an effective diet for the patients who suffer from cardiovascular disease. In physical evalution test, the ratio of mulberry leaves powder was not correlated with the appearance of Jeung-pyun. The value of color decreased as the ratio of mulberry leaves powder increases. In texture, Jeung-pyun. The value of color decreased as the ratio of mulberry leaves power increase. In texture, Jeung-pyun added with 2% mulberry leaves powder had the highest value. In moisture, as the level of mulberry leaves powder was increased, the value was decreased. In rheometer test, Jeung-pyun 0% mulberry leaves powder had the highest value in hardness. While the ratio of mulberry leaves powder was not correlated with cohesiveness. Jeung-pyun added to 1% mulberry leaves powder had the highest value. In gummines and brittleness, 0% Jeung-pyun had the highest value, but the ratio was not correlate with cohesiveness.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.663-672
• /
• 2022

The purpose of this study is to evaluate the magnesium sulfate resistance of a geopolymer mixed with rice husk powder. General concrete, silica fume mixed concrete, and binary blended geopolymer were selected as comparison targets to confirm the magnesium sulfate resistance, and sulfate deterioration was calculated using the compressive strengths with ages. In addition, the weight change rate and the relative dynamic coefficient of the geopolymer were comparatively analyzed, and the degree of etteringite formation was confirmed using X-ray diffraction analysis. the experiment, the geopolymer mixed with 10% rice husk powder showed 10.8% higher compressive strength than concrete with silica fume when submerged for 56 days. Also, the geopolymer mixed with rice husk powder showed a small weight change rate of 0.9 to 1.45%. composition after immersion in magnesium sulfate through X-ray diffraction analysis, it was observed that a small amount of ettringite was dispersed in the geopolymer containing rice husk powder. Thus, there is a high correlation with the corrosion resistance of magnesium sulfate

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.1
• /
• pp.12-19
• /
• 2022

The propellants used in the gas generator of the ducted rocket are fuel-rich propellants, which contain an excessive amount of metal fuel and a small amount of oxidizing agent compared to general solid rocket propellants. In this paper, boron powder and MgAl(Magnesium-Aluminium alloy) were applied to produce fuel-rich propellants. The optimum formulation was determined by characterizing these metal fuel-rich propellants. Analysis of combustion products in the gas generators confirmed that the fuel-rich propellants containing fine boron powder itself instead of boron-bead could be useful in gas generators.