• YAKHAK HOEJI
• /
• v.40 no.6
• /
• pp.713-719
• /
• 1996

Identification of soil microorganism strain B-6. a producer of acyl CoA synthetase inhibitor, based on its morphological, physiological, biochemical and chemotaxonomical charact eristics was performed. The strain B-6 was identified as Bacillus subtilis. Ihe acyl CoA synthetase inhibitor produced by this strain was highly achieved in fermentation medium that contained glucose 1.0%, soluble starch 1.0%, NH$_4$Cl 0.3%, oatmeal 1.0%, pharmamedia 1.0%, basic magnesium carbonate 0.5%. pH 7.5 at 30$^{\circ}$C for 7 days. The optimal pH and temperature for growth were 9.0 and 30$^{\circ}$C, respectively. Butanol extract of culture filterate of strain B-6 in acyl CoA synthetase inhibitor production medium containing corn steep liquor exhibited high acyl CoA synthetase inhibitor activity and antimicrobial activity against C. albicans. But chloroform extract of culture filterate of strain B-6 in medium containing NH$_4$Cl, ($NH_4)_2SO_4$ or urea instead of corn steep liquor exhibited higher antimicrobial activity against C. albicans than that of butanol extract.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.4
• /
• pp.213-217
• /
• 1995

The effect of inorganic phosphate on the fermentative production of aminopeptidase M inhibitors MR-387A and B by Streptomyces sp. SL-387 has been studied. With inorganic phosphate concentrations higher than 0.78 mM, an inverse correlation was found between the maximum inhibitor production and the initial phosphate concentration added. Growth sensitivity of this actinomycete to arsenate, a phosphate analogue, and the use of magnesium carbonate, a phosphate-trapping agent, suggested that the inhibitor formation was under phosphate repression. Exogenous ATP further increased the degree of phosphate interference in both phosphate-repressed and non repressed culture conditions. The use of a phosphate analogue and a protein synthesis inhibitor also suggested that the phosphate itself repressed inhibitor formation.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.111-120
• /
• 2023

The nucleation mechanism was studied using a calcium ion selective electrode (Ca ISE) to observe the formation of CaCO₃, a representative mineral in the CO2 cycle, and to analyze the effect of the Mg/Ca-ratio and temperature on the formation of pre-nucleation cluster (PNC) and CaCO₃. As a result of the experiment, a small amount of crystal was formed. Energy dispersive X-ray spectroscopy (EDS) was used for surface element analysis, and a field emission scanning-electron microscope (FE-SEM) was used for the morphology analysis of synthesized carbonates. These results showed that various shapes of crystalline CaCO₃ (calcite, aragonite, etc.) were observed for each Mg/Ca ratio and temperature. In addition, the calibration plot obtained from Ca ISE showed information on the formation process of CaCO₃. Our results showed that as magnesium ions interfered with the binding of calcium and carbonate ions and delayed the aggregation between PNCs, the nucleation and formation of CaCO₃ were delayed. On the other hand, the temperature showed an opposite trend as compared to the effect of magnesium under our experimental conditions, indicating that temperature accelerated the formation of CaCO₃. Furthermore, the morphology of CaCO₃ clearly changed according to the Mg/Ca ratio and temperature, and it was confirmed that the two factors are very important for CaCO₃ formation in that they could affect the overall process.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.627-634
• /
• 1995

Layered double hydroxides ($Mg-Al-CO_3$ systems, LDH), which are hydrotalcite-like anionic clay minerals, having different $Mg^{2+}\;to\;Al^{3+}$ ratio were synthesized by coprecipitation method. The subsequent products were characterized by the following methods; elemental analysis, X-ray powder diffraction, thermal analysis (DSC and TGA), FT-IR and $^{27}$Al-MAS NMR. X-ray powder patterns showed that the products formed were layered structure materials. Two heat absorption peaks were observed around 20 ∼280$^{\circ}C$ (surface water and interlayer water) and 280∼500$^{\circ}C$ (water from lattice hydroxide and carbon dioxide from interlayer carbonate) in DSC diagrams, and they were quantitatively analyzed by TGA diagrams (in case LDH4 16.2% and 28.6% respectively). FT-IR spectra indicate that the interlayer carbonate ions occupied symmetrical sites between two adjacent layers in a parallel direction. $^{27}$Al-MAS NMR spectra show only single resonance (8.6 ppm) of the octahedrally coordinated aluminum similar magnesium. When LDH4 was calcined at 560$^{\circ}C$ for 3 hours in air, its layered structure was destroyed giving a mixed metal oxide. However it readily became rehydrated in aqueous chromate solution to its original structure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.779-785
• /
• 2015

Cathodic protection is recognized as the most cost-effective and technically appropriate corrosion prevention method for the submerged zone of offshore structures, ships, and deep-sea facilities. When cathodic protection is applied, the cathodic currents cause dissolved oxygen reduction, generating hydroxyl ions near the polarized surface that increase the interfacial pH and result in enhanced carbonate ion concentration and precipitation of an inorganic layer whose principal component is calcium carbonate. Depending on the potential, magnesium hydroxide can also precipitate. This mixed deposit is generally called "calcareous deposit." This layer functions as a barrier against the corrosive environment, leading to a decrease in current demand. Hence, the importance of calcareous deposits for the effective, efficient operation of marine cathodic protection systems is recognized by engineers and scientists concerned with cathodic protection in submerged marine environments. Calcareous deposit formation on a marine structure depends on the potential, current, pH, temperature, pressure, sea-water chemistry, flow, and time; deposit quality is significantly influenced by these factors. This study determines how calcareous deposits form in sea water, and assesses the interrelationship of formation conditions (such as the sea water temperature and surface condition of steel), deposited structure, and properties and the effectiveness of the cathodic protection.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.5
• /
• pp.191-198
• /
• 2022

Zirconia and titanium alloys, which are mainly used for dental implant materials, have poor osseointegration and osteogenesis abilities due to their bioinertness with low bioactivity on surface. In order to improve their surface bioinertness, surface modification with a bioactive material is an easy and simple method. In this study, akermanite (Ca₂MgSi₂O₇), a silicate-based bioceramic material with excellent bone bonding ability, was synthesized by a solid-state reaction and investigated its bioactivity from the analysis of surface dissolution and precipitation of hydroxyapatite particles in SBF solution. Calcium carbonate (CaCO₃), magnesium carbonate (MgCO₃), and silicon dioxide (SiO₂) were used as starting materials. After homogeneous mixing of starting materials by ball milling and the drying of at oven, uniaxial pressing was performed to form a compacted disk, and then heat-treated at high temperature to induce the solid-state reaction to akermanite. Bioactivity of synthesized akermanite disk was evaluated with the reaction temperature from the immersion test in SBF solution. The higher the reaction temperature, the more pronounced the akermanite phase and the less the surface dissolution at particle surface. It resulted that synthesized akermanite particles had high bioactivity on particle surface, but it depended on reacted temperature and phase composition. Moderate dissolution occurred at particle surfaces and observed the new precipitated hydroxyapatite particles in synthetic akermanite with solid-state reaction at 1100℃.

• Journal of Veterinary Clinics
• /
• v.31 no.3
• /
• pp.199-205
• /
• 2014

Acidosis conditions either acute or chronic following ingestion of excessive amounts of readily fermented carbohydrate are great production problems for goat in Bangladesh. This study designed to investigate the prevalence of lactic acidosis and then response to different therapeutic agents. For this purpose, 1,128 goat were examined at outdoor District Veterinary Hospital, Faridpur, Bangladseh for treatment of which 40 goats were found positive for lactic acidosis showing 3.55% prevalence of disease. The highest occurrence found in female (4.64%) of over 3 years age (4.64%) in indigenous goat (2.7%). For therapeutic assessment the forty affected goats were divided into four groups A, B, C and D comprising of 10 animals each. Group A were given magnesium hydroxide 8% w/v at 1 g/kg body weight orally. In group B magnesium hydroxide 8% w/v at a dose as group A combination with 7.5% sodium bicarbonate at the rate of 0.9 ml/Kg body weight intravenously administered. Goat in group D were treated with mixture of ginger, nuxvomica, sodium carbonate, cobalt sulphate, dried ferrous sulphate and thiamin mononitrate at the rate of 1 g/kg body weight orally. Goat of group C treated with combination drugs of group A, B and D. The rectal temperature, pulse rate, respiration rate, was performed before and after treatment. It was found that the highest recovery in group C with an average period of $21{\pm}1.8$ hours. It was concluded that lactic acidosis is a common disease of goats and its severity can be effectively reduced by using combination drugs.

• Journal of Life Science
• /
• v.11 no.1
• /
• pp.7-10
• /
• 2001

Nonactin is the parent compound of a group of ionophore antibiotics, that known as the macrotetrolides. In previous report, in th course of screening superoxide radical-generating compounds from microbial sources, we first screened Streptomyces viridochromogenes JM-4151 that produces nonactin. It was proved that nonactin is superoxide radical-producing compound. In present study, we examined the optimal culture conditions of nonacin. Th optimal culture conditions for nonactin production were as follows: 1% soluble starch, 1% yeast extract, 0.2% ammonium nitrate, 0.06% magnesium sulfate, 0.2% calcium carbonate, initial pH 7.0 at 28$^{\circ}C$ for 96 h. The highest nonactin production was achieved in the production medium of initial pH7.0 at 28$^{\circ}C$ for 96h. The threshold level of dissolved oxygen was found to be above 33.2% at 28$^{\circ}C$ when 1% soluble starch was used as a carbon source. These results suggest that S. viridochromogenes JM-4151 might be a possible strain for industrial nonactin producer.

• Microbiology and Biotechnology Letters
• /
• v.4 no.4
• /
• pp.152-158
• /
• 1976

Cultivation condition of yeast on the utilization of fermentable substrate from the cellulosic wastes such as rice hull, rice straw and corn starch cake was investigated. The results obtained were summarized as follows；1. Corn starch cake was respectively added to rice hull and rice straw in order to increase sugar concentration in the hydrolyzate, and then hydrolyzed. As the result, concentration of sugar in hydrolyzed solution of rice hull was 9.12％, in that of rice straw was 7.98％. 2. It was found that calcium carbonate as a neutralizer was the most effective to prepare the culture broth of yeast. 3. An optimal growth of Hansenula subpelliculosa GFY-2 was observed in the medium prepared by adding 0.3％ of ammonium sulfate, 0.4％ of potassium phosphate dibasic, 0.02％ of magnesium sulfate, sodium chloride and calcium chloride to hydrolyaed sugar solution, respectively. 4. Hansenula subpellicuiosa GFY-2 cultured in the substrate solution which of rice hull and rice straw added to corn starch cake was assimilated more than 90％ of sugar in the hydrolyzate within 48 hours. The yeast cells yielded in rice hull was 46.5％, and that of rice straw 45.4％ to utilized sugars.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.83-90
• /
• 2016

The aim of the present study was to evaluate the degree of metal contamination of the Turag River water and its suitability for irrigation. Twenty water samples were analyzed for physicochemical parameters and metals viz., calcium, magnesium, potassium (K), sodium, copper (Cu), zinc (Zn), iron (Fe), manganese (Mn), lead (Pb), cadmium (Cd), chromium (Cr), and nickel (Ni). All water samples were slightly alkaline to alkaline. Regarding electrical conductivity (EC), all samples were suitable for crop in soils with moderate permeability and leaching. Water samples were medium salinity and low alkalinity hazard classes. In terms of total dissolved solids (TDS), all samples were classified as freshwater. As per sodium adsorption ratio (SAR) and soluble sodium percentage (SSP), all samples were classified as excellent. No residual sodium carbonate (RSC) was detected in any of the samples, indicating suitability for irrigation; and all samples were considered very hard. Cr and Mn contents in all samples were above FAO guideline values and, therefore, these metals were considered toxic. Zn, Cu, Pb, Cd, and Ni concentrations were below acceptable limit for irrigation and do not pose a threat to soil environment. Significant relationships were found between EC and TDS, SAR and SSP, SAR and RSC, and SSP and RSC. The combinations of ions such as K-Zn, K-Fe, K-Cu, K-Mn, K-Pb, Zn-Fe, Zn-Cu, Zn-Mn, Fe-Mn, Cu-Mn, Cu-Pb and Mn-Pb exhibited significant correlation. This study revealed that Turag River water samples are contaminated with Cr and Mn. This fact should not be ignored because water contamination by metals may pose a threat to human health through food chain.