• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.201-210
• /
• 1994

A theoretical heat-flow model incorporating with a constant moving CO$_{2}$ laser beam has been analyzed to predict depth and the shape of bead section during last beam welding. The laser beam is exponentially attenuated with an abosrption coefficient in the material. The solution can be expressed in terms of normalized variables. The experimental data were generated by usint CW 2 CO$_{2}$ laser with multi beam mode and CW 3 kW CO$_{2}$laser with Gaussian mode. The specimens were made as bead-on-plate welds for SM 10C, STS 304, STS 316, STS 420 and pure Nickel. The maximum possible penetration depth and the shape of beas section for given sources of laser power, travel speed and beam spot size can be prdicted with this model in a given material.

• Bulletin of the Korean Mathematical Society
• /
• v.29 no.2
• /
• pp.193-200
• /
• 1992

This paper uses a piecewise ratonal cubic interpolant to solve the problem of shape preserving interpolation for plane curves; scalar curves are also considered as a special case. The results derived here are actually the extensions of the convexity preserving results of Delbourgo and Gregory [Delbourgo and Gregory'85] who developed a $C^{1}$ shape preserving interpolation scheme for scalar curves using the same piecewise rational function. They derived the ocnstraints, on the shape parameters occuring in the rational function under discussion, to make the interpolant preserve the convex shape of the data. This paper begins with some preliminaries about the rational cubic interpolant. The constraints consistent with convex data, are derived in Sections 3. These constraints are dependent on the tangent vectors. The description of the tangent vectors, which are consistent and dependent on the given data, is made in Section 4. the convexity preserving results are explained with examples in Section 5.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.187-197
• /
• 1996

In this study, the properties of coil spring made by Cu-Zn-Al and B added shape memory alloys are investigated. The measurement of recovery displacement and energy with increasing weight, and thermocycling properties have been studied using displacement measuring device. Transformation temperature and phase change by thermocycling have been also investigated by DSC and X-ray diffractometer. Grain size of the alloy is refined from 1.2mm to $400{\mu}m$ by 0.06wt% of B addition. The maximum recovery energy of the coil spring for B added alloy is larger than that of no B added alloy, it is because of grain refinement. And shape memory ability of the coil spring by thermocycling decrease with increasing thermocycling after thermocycle under load. The degradation of shape memory properties of coil spring by thermocycling is improved by B addition.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.1
• /
• pp.3-9
• /
• 1983

Due to the wide and effective use of sucker controlling chemicals, gentic studies on the suckering habits of tobacco plants have long been neglected. So, to investigate the genetic basis of suckering, crosses between "Little Dutch" and "Cuban" were made, and subsequent generations, $F_1F_2,\;BC_1,\;BC_2,$ and parents were grown on the field. Several morphological characters were measured and the relation among them were analyzed. Correlation coefficients between leaf shape and sucker leaf shape, and the number of suckers and sucker weight were 0.25 and 0.42, both sighificant at 1 % level. But negative correlation between number of suckers per plant and that of leaves was observed, though statistically not significant. Dominance was observed in the number of suckers and amount of suckers produced, and the heritability of sucker shape was calculated as high as 0.88. And two paris of genes seemed to be involved in the inheritance of sucker shape, and narrow leaf appeared as dominant in the $F_1$.inant in the $F_1$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.2 no.3
• /
• pp.235-244
• /
• 1998

In the design of bridges, the points of concem are the landscape design, the function, safety and economical efficiency. But most of studies have been performed on structural engineering. The study on the landscape design of bridges has not been done in korea. Therefore, in this research, the design method of bridges by the judgement of structural engineering and landscape engineering has been proposed, through the process to decide the shape of bridges. Also, the research studies a problem about the visual safety of the structural shape in the landscape design of bridges. The visual experiments applied to the seven models about the shape of hunch in bridge pier. The experiment was made in moving velocity of view point, steady looking time and track of eyeball movement.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.244-249
• /
• 2000

Thermal gradient chemical vapor infiltration (TG-CVI) process, which is one of the CVI techniques to densify a porous fiber preform, requires for a heater to have uniform surface temperature distribution. Thus, it is essential to design the shape of the heater and to predict the temperature distribution when the heater has a profile which is not a simple cylinder. In this study, an analytical method has been used to design the inner profile of a conical heater showing uniform temperature distribution, if its outer shape is specified. Temperature distribution on the heater surface has been calculated with the finite difference method and compared with the experimental results. When a heater had a combined profile with a large cone and a small cylinder, temperature was higher in the cylindrical part. To reduce the temperature difference between these areas, a hole-machining method has been proposed including other possible ones. A shape design and optimization program has been made to improve the temperature uniformity of the TG-CVI heater better than that designed with the analytical method.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1998.10b
• /
• pp.19-19
• /
• 1998

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.447-457
• /
• 2003

The shape of womens breast is the most important part of body silhouette. For the high-fitted clothes, in particular, more refined brassiere effective enough to show the beautiful line of female breast is asked. This study focuses on comparing the difference of the two different textiles of brassiere as to their effectiveness as a brassiere. The Stockman Lingerie Mannequin made by England is used for the draping method for the brassiere pattern. Two different brassieres of stretchable and unstretchable(cotton) textiles respectively were made out of this pattern, and the difference of effectiveness wearing the two brassieres was compared. 30 females ranging in the ages of 19 through 24, and whose size is 75A were selected as the test group who are to wear them. The result of each measurement proves that the cotton brassiere is more effective than the stretchable brassiere as a whole considering center concentration of breast, projection of breast, and bust up function. The result of the test on satisfaction of wearing brassiere was also in favor of cotton brassiere as to projection effect, bust up effect, making a good shape of bust. For the cup, in particular, unstretchable textile is more effective for making a breast look better.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.209-213
• /
• 2006

The 3-D information is useful as basic data which has been utilized in the development of simulating technology as fit-simulation. The experiment is designed to take some useful data on the variant shapes which contribute in simulating the adaptability of the clothes. The general figure of the clothes are made after the figure of the basic standing posture of the human body. The shape of the clothes fits with kinetic characteristic of the human body as the form of the clothes gets twisted, the ease of the clothes changes, and the clothes itself expands. We studied the dressed shapes of blouse according to two types of the arm movement(basic posture and reach forward) and three types of clothes(foundation, blouse with short sleeves and sleeveless) in the sit-down-posture. We accomplished some experimental data on three-dimensional measurement of the dressing shapes using TDS-3100 3-D scanner made in Japan PULSTECH. It is considered that the variant of shapes and distribution of gaps in the dressed shapes of blouse are determined by the adaptability of clothes made in arm movement.

• Composites Research
• /
• v.23 no.1
• /
• pp.23-30
• /
• 2010

Most of the bridge systems, including the girders, cross-beams, and concrete decks behave as specially orthotropic plates. In general, the analytical solution for such complex system is very difficult to obtain. In this paper presented, a design method of slab bridge of simple supported made by composite materials. For the design of bridge made by the composite materials, cross-section was used the form-core shape because of this shape is economical and profitable, and for output of the stress value used finite difference method. In this paper, the rate of tensile strength reduction due to increased size was considered. Strength-failure analysis procedure, using the reduced tensile strength, was presented. And also numerical study was made for these cases.