• The Korean Journal of Malacology
• /
• v.26 no.3
• /
• pp.185-199
• /
• 2010

Correlation between community structure of herbivore and succession of macro-algal flora was examined in subtidal area of Dang-Sa Province, eastern coast of Korea from April 2008 to December 2009. For examination, the authors hypothesized that there are significant correlation between the foregoing two variables. Samplings were conducted every two months quantitatively with SCUBA diving at -3, -6 and -10 depth in the two line transects (barren and forest grounds). As results, rhodophyts was predominated in the algal flora based on the number of species and biomass; molluscs was predominated in the herbivores based on the number of species and echinoderms was predominated in that based on the biomass. There was no significant correlation between the foregoing two variables in the whole survey area and barren/forest grounds. Consequently, the hypothesis was rejected. The authors proposed that examination of correlation between the foregoing two variables should focus on the specific herbivore group(s) (e.g., amphipods) afterward.

• Advances in aircraft and spacecraft science
• /
• v.10 no.1
• /
• pp.83-106
• /
• 2023

In this work, the static behavior of FGM macro and nano-plates under thermomechanical loading. Equilibrium equations are determined by using virtual work principle and local and non-local theory. The novelty of the current model is using a new displacement field with four variables and a warping function considering the effect of shear. Through this analysis, the considered sandwich FGM macro and nanoplates are a homogeneous core and P-FGM faces, homogeneous faces and an E-FGM core and finally P-FGM faces and an E-FGM core. The analytical solution is obtained by using Navier method. The model is verified with previous published works by other models and very close results are obtained within maximum 1% deviation. The numerical results are performed to present the influence of the various parameters such as, geometric ratios, material index as well as the scale parameters are investigated. The present model can be applicable for sandwich FG plates used in nuclear, aero-space, marine, civil and mechanical applications.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.291-296
• /
• 2000

In this paper a relatively simple and reliable wall models are investigated, which are suitable to be efficiently incorporated in a practical nonlinear seismic analysis of reinforced concrete shear wall structural systems. Four types of analogous frames have been selected for the elastic stress analysis. Three types of macro-elements model which include wide-column model, truss model and Kabeyasawa model, are chosen for the use in nonlinear analysis. A numerical analysis is carried out for six stories plane coupled wall structure. Analysis results indicate that macro-elements wall model is effective and suitable for simulating stress in elastic analysis. In inelastic analysis, the yielding strength have little effect on different wall model, and the effect on post-yielding stiffness in story shear-drift relationship depend on force-deformation properties of macro-elements.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.43-47
• /
• 2006

Macro interface is primarily focused at the organization, while micro interface is primarily focused at the products or services. UI(User Interface) or UX(User Experience) organizations in Korea are institutionalized from 2000 years. Since most of the UI organizations are not institutionalized with the strategic plan, structures of them aren't optimized efficiency. The structure of the organization is conceptualized as having three core dimensions: complexity, formalization, and centralization. The status of the UI organizations in Korea is reviewed with these dimensions. This study issued the key success factors for institutionalization for UI team. Organizational maturity is considered in 5 levels based on a model by CMMI. The UI strategy has to be based the maturity level of the organization.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.141-153
• /
• 1999

The focus of marketing study on the strategic tools has shifted from traditional 4Ps'(product, price, place and promotion) to macro relationship marketing which places emphasis on interfirm relationships. The purpose of this study is to develope antecedent variables of relationship type which play the most important role of interfirm relationships, and the antecedent variables of relationship structure comprises three factors : 1) transactional relationship structure, 2) hierarchical relationship structure and 3) embedded relationship structure.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.55-67
• /
• 2010

The electrical properties of a back drilled via-hole (BDH) without the open-stub and the plated through via-hole (PTH) with the open-stub, which is called the conventional structure, in a high-count multi~layered (HCML) printed circuit board (PCB) were investigated for a high-speed digital system, and a selected inner layer to transmit a high-speed signal was farthest away from the side to mount the component. Within 10 GHz of the broadband frequency, a design of experiment (DOE) methodology was carried out with three cause factors of each via-hole structure, which were the distance between the via-holes, the dimensions of drilling pad and the anti-pad in the ground plane, and then the relation between cause and result factors which were the maximum return loss, the half-power frequency, and the minimum insertion loss was analyzed. Subsequently, the empirical formulae resulting in a macro model were extracted and compared with the experiment results. Even, out of the cause range, the calculated results obtained from the macro model can be also matched with the measured results within 5 % of the error.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.13-22
• /
• 2008

Internal voids affecting the mechanical properties of wood composite were classified into two catagories and characteristics of voids were examined according to density variation of strandboard. The void distribution and content of strandboard according to board density were measured by X-ray computed tomography system and analized using image processing software. Prior to investigation, the densities of strandboard were measured by densitometer and the results were showed high correlation with conventional oven drying method. Based on the image analysis conducted on captured images by X-ray tomography, low resolution can be used to capture the macro-voids (between strand) but not the micro-voids (within strands). Intermediate resolution can be used to capture both the macro and the micro-voids and high resolution can be successfully used to capture the majority of the micro-voids. The content of macro-void was measured and content of micro-void was computed by corresponding related equation. The macro-void distribution can be successfully understood and void content can be correctly estimated through the results.

• Structural Engineering and Mechanics
• /
• v.51 no.3
• /
• pp.447-470
• /
• 2014

Numerical simulation of the non-linear behavior of (RC) structural walls subjected to severe earthquake ground motions requires a reliable modeling approach that includes important material characteristics and behavioral response features. The objective of this paper is to optimize a simplified method for the assessment of the seismic response and damage development analyses of an RC structural wall building using macro-element model. The first stage of this study investigates effectiveness and ability of the macro-element model in predicting the flexural nonlinear response of the specimen based on previous experimental test results conducted in UCLA. The sensitivity of the predicted wall responses to changes in model parameters is also assessed. The macro-element model is next used to examine the dynamic behavior of the structural wall building-all the way from elastic behavior to global instability, by applying an approximate Incremental Dynamic Analysis (IDA), based on Uncoupled Modal Response History Analysis (UMRHA), setting up nonlinear single degree of freedom systems. Finally, the identification of the global stiffness decrease as a function of a damage variable is carried out by means of this simplified methodology. Responses are compared at various locations on the structural wall by conducting static and dynamic pushover analyses for accurate estimation of seismic performance of the structure using macro-element model. Results obtained with the numerical model for rectangular wall cross sections compare favorably with experimental responses for flexural capacity, stiffness, and deformability. Overall, the model is qualified for safety assessment and design of earthquake resistant structures with structural walls.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.4
• /
• pp.381-388
• /
• 2000

Ceramic foam prepared with cordierite as a starting material by foam method was tested to evaluate the feasibility as a filter for the dust collection in hot gas. Two different types of agents Benzethonium chloride (BZTC, C27H42NO2Cl) and Sodium Lauryl Sulfate(SLS, CH3(CH2)11OSO3Na) were used as foaming agents in foaming process. Porosityof ceramic foam was about 80% and mean pore size were 100${\mu}{\textrm}{m}$ for SLS agent and 200 ${\mu}{\textrm}{m}$ for BZTC. It was observed that ceramic foam was composed of continuous macro-pore structure with opening windows interconnecting macro-pores. The surface of ceramic foam support of was coated with cordierite particles ranged from 20${\mu}{\textrm}{m}$ to 50${\mu}{\textrm}{m}$ Meso-pore size in the coating layer on ceramic foam was below 10${\mu}{\textrm}{m}$. While air permeability of the support increased with increasing macro-pore size coated ceramic filters showed a constant permeability without regard to the macro-pore size of the support. The permeabuilities of support varied in the range of 600$\times$10-13m2 to 1000$\times$10-13m2. For the case of coated ceramic filter it was about 200$\times$10-13m2. As a result of particle trapping test by using fly ash the particle removal efficiency was over the 99.9%.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.307-312
• /
• 2011

In the macro/femto cellular networks, the portion of channels assigned to each cell is a critical factor which sets the stability and the performance of the whole system. To grasp the concrete influence that the channel split portion have on the system, we present the queueing model for IP based macro/femto cellular networks, and find the stability conditions. Additionally we provide the strategy to decide the portion of channels allocated to each cell. Through the experiments, we prove that the proposed strategies operate feasibly in various network environments, and on the basis of these results we discuss the efficient system structure plan.