• Environmental Engineering Research
• /
• 제12권3호
• /
• pp.109-117
• /
• 2007

The characteristics of carbonaceous particles collected from the combustion of Vacuum Residue (VR) in a test furnace have been investigated. The physical and chemical characterization includes particle size, scanning electron microscopy of the surface structure, measurement of porosity, surface area and density, EDX/XRD analyses and measurement of chemical composition. The studies show that the carbonaceous VR particles are very porous and spheroidal, and have many blow-holes on the surface. The particles become smaller and more sponge-like as the reaction proceeds. The present porosity of VR particles is similar to that of cenospheres from the combustion of heavy oil, and the majority of pores are distributed in macro-pores above $0.03\;{\mu}m$ in diameter. Measurements of pore distribution and surface area showed that the macro-pores contributed most to total pore volume, whereas the micro-pores contributed to total surface area.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.1-11
• /
• 1999

surface texture denotes set of tiny repetitive geometric features on an object surface. 3D Printing can readily create a surface of controlled macro-textures of high geometric complexity. Designing surface textures for 3D Printing, however, is difficult due to complex macro-structure of the tiny texture geometry since it needs to be compatible with the non-traditioal manufacturing method. In this paper we propose a visual simulation technique involving development of a virtual model-an intermediate geometric model-of the surface texture design prior to fabricating the physical model. Careful examination of the virtual model before the actual fabrication can help minimize unwanted design iterations. The proposed technique demonstrated visualization capability by comparing the virtual model with the physical model for several test cases.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.305-312
• /
• 2003

Recently, with a progressive development of hardware of computer, the internet and network technology, the environment of construction varies rapidly due to increase the complex form in structure shape and system. With variations, the CAD system for design and products also varies from 2D system to 3D system. This study mainly deals with the methodology of automatic connection design of 3D CAD system, steel connection system (XSteel) using macro. First, using design program in the steel connection system, Xsteel, the joint connection macro will be made up and established the detail classes of design. The next, Database Program (Converter Program) related to the general structural analysis program (MIDAS) and the steel connection program (Xsteel) is constructed for data interface between two programs. From this study, if the merits of 3D CAD system and converter program are utilized well, it is expected that the time needed in modeling and the amounts due to material loses decrease gradually.

• 한국시스템다이내믹스연구
• /
• 제10권1호
• /
• pp.5-32
• /
• 2009

This paper revisited the key advances on System Dynamics modeling about traditional macro-economic models and economic growth structures, and then tries to elaborate a new model based on the endogenous growth theory that incorporates new growth factors, relevant to knowledge/technology as well as the Environment, into traditional growth models. Accordingly, the new model augments the acceleration and multiplier loops and the balancing ones representing market clearing mechanism with a simple numerical example. The authors thus provides macroeconomic System Dynamics analysts with a milestone to model macro-economic structures reflecting on traditional and cutting-edge theories on sustainable economic growth and general equilibrium modeling.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.781-783
• /
• 1993

The GTO model is based on the Ebers-Moll equation extened to include the three-junction devices and a detailed description of the implementation of the model equation as well as defferent tests are discussed. Problems to be considered for the snubber design, such as voltage spike reduction, maximum GTO anode current, and switching power, were discussed using the calculation model. The macro model is very useful for simulation of GTO circuit and high power circuit switch in high frequency and complex structure.

• 비파괴검사학회지
• /
• 제22권4호
• /
• pp.333-346
• /
• 2002

재료에 가해지는 하중에 따른 변형정도를 측정하는 연속압입시험은 비파괴적으로 재료의 기계적 물성을 직접 평가할 수 있는 기법으로, 하충의 범위에 따라 macro, micro 그리고 nano의 세 범위로 나눌 수 있다. Macro 범위는 kgf 영역에서 사용되어, 국부 영역의 인장물성과 신뢰성 저하의 주요 원인인 잔류응력을 구할 수 있으며, 최근에는 국내기술에 의해 관련 기기와 기술이 개발되었다. 산업구조물, 사용중인 배관 등 기존 시험법으로는 평가하기 힘든 소재의 신뢰성 평가에 많은 활용이 이루어지고 있다. Micro 범위는 gf 영역으로, macro 범위보다 높은 분해능에 의해 용접부 등 물성 구배가 존재하는 재료에 사용된다. 한편 mgf 영역의 극미소하중에 적용되는 nanoindentation technique은 기본적으로 경도와 탄성계수를 구할 수 있으며, 잔류응력, 인장물성 등을 유도하는 연구가 진행중이다. 반도체 재료, 다 상 재료, 바이오 소재 등에서 많은 활용이 이루어지고 있으며, 그 수요가 급격히 증가하고 있는 추세이다. 이러한 연구 들올 바탕으로 하여 국제 표준 규격 및 국내 표준 규격의 제정이 추진 중이다.

• 인지과학
• /
• 제23권1호
• /
• pp.47-71
• /
• 2012

본 연구에서는 대학생들이 물리학 실험 보고서를 작성하고 동료들과 보고서에 대한 코멘트를 주고받은 후 보고서를 어떻게 수정하였는지, 특히 동료와 코멘트를 주고받는 과정이 글 수정활동에 어떤 영향을 주었는지 살펴보았다. 보고서 초안과 수정본 간의 차이를 비교한 결과, 학생들은 글의 좁은 의미 단위를 주로 수정하였고, 글의 전체 의미 구조, 구성, 조망 같은 글의 포괄적인 의미에 대한 수정은 드물었다. 동료와 글에 대한 코멘트를 주고받는 활동이 수정행동에 어떠한 영향을 주었는지를 살펴본 결과, 글의 작은 의미 단위를 지적하는 코멘트를 받은 경우 좁은 의미 단위의 수정이 촉진되었다. 그러나 글의 포괄적인 의미 측면을 지적하는 코멘트의 경우, 학생들이 이러한 코멘트를 많이 제공하고 받았음에도 불구하고, 넓은 의미 단위의 수정으로 잘 연결되지 않았다. 즉, 학생들이 상호리뷰에서 코멘트를 제공하고 받는 경험이 이후 수정행동에 영향을 주었으나, 그 영향은 주로 좁은 의미 단위의 수정에 국한되어 있었고 포괄적인 의미 단위 차원의 문제점에 대해서는 동료의 지적을 받은 다음에도 수정이 잘 일어나지 않았을 뿐만 아니라 수정이 이루어진 경우도 효과적이지 않았다. 이러한 결과는 좋은 글의 표면적인 특징뿐만 아니라 의미 차원의 특징, 특히 글의 전체를 아우르는 넓은 의미 차원의 문제를 이해하고 해결할 수 있는 방략을 습득하는 것이 글쓰기에 중요함을 시사한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.235-238
• /
• 2001

Milli-structure components are classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiment. Generally, milli-structure containers or cases like cellular phone vibrator consist of rectangular-shaped drawing to save installation space. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1066-1072
• /
• 2013

In this work, active control algorithm is adopted to reduce delamination effects of the damaged composite structure and control performance with MFC actuator is numerically evaluated. Finite element model for the damaged composite structure with piezoelectric actuator is established based on improved layerwise theory. In order to achieve high control performance, MFC actuator, which has increased actuating force, is considered as a piezoelectric actuator. Mode shapes and corresponding natural frequencies for the damaged smart composite structure are studied. After design and implementation of active controller, dynamic characteristics of the damaged smart composite structure are investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.273-278
• /
• 2011

This work presents an active vibration control of a stiffened hull structure using a flexible macro fiber composite (MFC) actuator. As first step, the governing equation of the hull structure is derived in a matrix form and its dynamic characteristics such as natural frequency are obtained via a finite element analysis (FEA). The natural frequencies obtained from the FEA are compared with those determined from experimental measurement. After formulating the control model in a state space representation, an optimal controller is designed in order to attenuate the vibration of the stiffened hull structure. The controller is then empirically realized through dSPACE and control responses are evaluated in time domain.