• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.897-906
• /
• 2020

This research focuses on the physicochemical characteristic of fermentation of Aloe Saponaria. The fermentation process applied in this study had 2 variation, depends on the aloe part as the materials (bottom, middle, and tip) and the initial sugar content (24% and 0%) used. Tests are conducted using uinkin fermented powder, sugar, salt, and distilled water as fermenting agent. The results indicate that change in physicochemical properties of aloe's skin was larger than in aloe's gel as fermentation materials. In contrast, there was no significant change in aloe's leaf during the process. A lso, aloes with intial sugar condition of 24% show better results than which without sugar addition in fermentation.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.248-254
• /
• 2013

Purpose: This study was performed in order to obtain basic data for policy development and R&D to sharpen competitiveness in domestic agricultural machinery industry by analyzing the recent status of demand and supply for tractor, rice transplanter(riding type), and combine. Methods: Basic data from 199,275 units of tractor, rice transplanter (riding type), and combine was offered by the National Agricultural Cooperative Federation and Korea Agricultural Machinery Industry Cooperative. Those agricultural machines were supplied by the government's loan support from 2003 to 2012. Results: Recent supply of tractor is only 13,000 units or so per annum, thereby being stagnated. Rice transplanter and combine in 2012 corresponded to 3,810 units and 2,490 units, respectively. The domestic market share of the imported agricultural machinery accounted for 60.0% in tractor, 99.5% in saddle rice transplanter, and 80.9% in combine, thereby having been sharply increased 33.1%p, 42.0%p and 53.6%p compared to the ones in 2003. Life spans of tractor, combine and saddle rice transplanter are 3.7, 3.7 and 4.2 years, respectively. Among the discontinued models, the one less than 300 units supplied was occupied up to 70~85%. Conclusions: The domestic demand and the export expansion are needed through developing a model of agricultural machinery of having competitiveness to domestically activate agricultural machinery industry.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권1호
• /
• pp.23-52
• /
• 2017

바이오융합 및 의료기기 산업은 의학과 전기, 전자, 기계, 재료 등 공학이 융합되는 다학제간 응용기술 산업분야이다. 바이오 융합 및 의료기기를 이용해 인간의 삶의 질 향상을 목표로 하고 있으며 제품에 대한 인지도와 브랜드 파워가 매우 중요한 산업이다. 그러나, 자본/기술 의존형 산업으로 제품의 개발부터 생산까지 소요되어지는 기간이 길고 개별 제품의 시장 규모가 작고 수명주기가 짧다고 할 수 있다. 따라서 연구개발에 대한 지속적인 투자가 요구되어지는 산업으로 국가적인 차원에서 바이오벤처 기업들을 위해 기술적 지원, 제도적 뒷받침, 인력 양성 등의 산업생태계 전반을 활성화하고자 하는 노력이 필요하다.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.197-201
• /
• 2005

The purpose of this study is to investigate the work ability of employees using the work ability index(WAI) and to confirm factors affecting the work ability of employees in the Korean machinery industry. In this study, correlations between the WAI score and variables affecting the work ability of employees(age, the class of the employee's position the character of the work and the type of the work) were analysed by the correlation analysis. The study population was consisted of employees from Korean machinery industry(n=446) and the WAI questionnaire was more or less modified considering actual circumstances in Korean. The WAI score of entire employees was slightly high (WAI score=42, Level=Good) and the WAI score of employees under 29 years of age was slightly higher than that of employees over 30 years of no. As a result of one-way ANOVA and correlation analysis, the character of the work and the type of the work were variables affecting the WAI score and the WAI score of physical/mental workers was higher than that of physical workers.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.726-733
• /
• 2004

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.563-571
• /
• 2021

In this study, calcium alginate based cation exchange membrane was prepared and used to develop membrane capacitive deionization (MCDI) system for effective hardness control. As a major result, the MCDI with Ca-alginate membrane showed 27% better deionization capacity than the MCDI with a commercial cation exchange membrane. This superior improvement in the deionization capacity was expected to be due to the high ratio of transport number/electrical resistance (S_c/R_ratio) of Ca-alginate membrane. In addition, the MCDI with Ca-alginate membrane showed better deionization performance than the MCDI with Ca-alginate coating. This was because the space between the electrode and the Ca-alginate membrane was utilized for ion adsorption. The preliminary results indicated that the MCDI with Ca-alginate membrane can be a viable technique for the hardness control.

• 섬유기술과 산업
• /
• 제2권1호
• /
• pp.1-10
• /
• 1998

• 한국산업융합학회 논문집
• /
• 제21권5호
• /
• pp.197-205
• /
• 2018

In this research, tricycle vehicle simulation based on multi-body environment has been introduced. Mathematical model of tricycle vehicle was developed. In this research the left and right wheel speed are calculated based on the rear steering angle and velocity. The kinematic model for the three - wheel drive system was completed and the results were analyzed using the actual vehicle drawings. Through simulink vehicle performance on linear and rotation movement were simulated. Using the mathematical model the control system can be applied directly to the tricycle vehicle. The simulation result shows that the proposed vehicle model is successfully represent the movement characteristics of the real vehicle. This model assists the vehicle developer to create the controller and understand the vehicle during the development process.

• 한국산업융합학회 논문집
• /
• 제22권1호
• /
• pp.47-54
• /
• 2019

An experimental study was conducted on the wear and friction responses in sliding tests of a micro-textured surface on laser pattern (LP) steel as reduction gear material in electric guided vehicle. In this research, the friction characteristics of laser pattern steel under different micro texture density conditions were investigated. The friction tests were carried out at sliding speeds of 0.06 m/s to 0.34 m/s and at normal loads of 2 to 10 N. Photolithography method was used to create the dimples for surface texturing purpose. Four different specimens having different dimple densities of 10%, 12.5%, 15%, and 20% were observed respectively. In this research, friction conditions as shown in Stribeck curve were investigated. Furthermore, the microscopic surface was observed using scanning electron microscope. It was found that the dimple density had a significant role on the friction characteristics of laser pattern steel conditioned as reduction gear material in an agricultural vehicle. The duty number showed that the friction condition was hydrodynamic regime. The best performance was obtained from 12.5% dimple density with lowest friction coefficient achieved at 0.018771 under the velocity of 0.34 m/s and 10N load.

• 기술혁신학회지
• /
• 제19권1호
• /
• pp.161-190
• /
• 2016

국가연구개발사업 성과요인에 대한 실증적 연구는 공식적인 데이터를 이용하여 많은 연구자에 의해 활발하게 수행되고 있다. 하지만, 국가연구개발사업과 산업기술의 특성을 동시에 고려한 실증적 연구는 일부 연구자에 의해서만 이루어지고 있다. 본 연구는 산업기술별 특성이 다르다면 성과창출 영향요인이 다를 것이라는 전제 하에, 부품소재산업경쟁력향상사업의 산업기술별 성과창출 영향요인의 유사점과 차이점을 객관적인 데이터를 이용하여 공분산분석과 다중회귀분석을 통해 실증적으로 비교 분석하였다. 그 결과 산업 기술 분야별로 첫 번째 연구수행주체에 따른 성과의 유의차 여부는 국내특허출원건수, 해외특허출원건수, 논문게재건수의 경우가 다르게 나타났다. 두 번째 과제참여기관수에 따른 성과의 유의차는 상이하게 나타났다. 세 번째 정부연구비에 따른 성과의 유의차 여부는 국내특허출원건수, 해외특허출원건수, SCI 논문게재건수의 경우가 다르게 나타났다. 네 번째 민간투자비율에 따른 성과의 유의차 여부는 표본과 산업에 관계없이 모두 없는 것으로 나타났다. 본 연구를 통해 산업기술별로 주체에 따라 창출하는 성과가 다르며, 성과에 영향을 미치는 요인이 다르다는 것을 확인하였다. 이를 통해 국가연구개발사업 기획 및 성과창출 방안 마련 시 각 산업기술 분야별 특성을 고려한 차별적인 연구개발정책의 필요성을 찾아볼 수 있다.