• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.53-59
• /
• 2007

The cutting tests of wood patterns are carried out using CNC milling machine. The cutting forces are monitored to analyse the cutting process. The surface characteristics of machined surface are investigated at various cutting conditions such as cutting speed, feed speed, cutting direction of wood pattern and wood material. In the CNC end-milling, the surface roughness increases as feed speed increases and decreases as cutting speed increases. However, the cutting force and surface roughness are different along the cutting direction and material of wood pattern.

• 한국포장학회지
• /
• 제9권1호
• /
• pp.7-10
• /
• 2003

This study was carried out to investigate vibration shock of electric appliances during transport. Microwave oven, TV, washing machine and refrigerator were singled out as the study items. Transport courses were selected as follow ; an expressway between Kumi and Seoul for TV, an expressway between Kwangju and Seoul for microwave oven and washing machine, a national road between Inchon and Seoul for refrigerator. the values of vibration shock were measured to be ${\sim}3G$ on the national road and 1G on the expressway for up and down direction, ${\sim}0.5G$ on the national road and expressway for back and forth direction and ${\sim}0.8G$ on the national road and expressway for right and left direction. There was no damage during transport. These values were corresponding to grade II of KS A 1026 (General Rules of Performance Testing for Packaged Freights).

• 한국의학물리학회지:의학물리
• /
• 제7권1호
• /
• pp.53-64
• /
• 1996

목적 : 별모양무늬를 이용하여 원격 방사선치료기의 회전축의 정확성을 평가할 때 방사선의 진행방향을 고려해야 하는 이론적 근거와 방법을 개발하고, 방사선의 진행방향이 기록되지 않는 경우 길이 방향의 비대칭 조사면을 이용하여 흉내내는 방법을 개발하는 것이다. 방법 : 갠트리 회전축의 기계적 정확성을 평가하기 위해 방사선의 진행방향을 고려하였다. 좁은 조사면에 의해 별모양무늬를 만들어 회전축이라고 어림되는 교점에서 l0cm 떨어진 위치의 측방선량분포를 필름농도계로 측정하여 선축의 좌표를 구하고 하나의 선축에 있는 한 쌍의 좌표를 이용하여 선축의 식을 구한다. 선축과 일치하는 방사선 진행방향의 단위벡터 equation omitted를 구하고 가정된 회전축의 좌표에서 각 선축으로 향하는 벡터 equation omitted와 equation omitted의 벡터곱 equation omitted$\times$equation omitted을 구하여 평균을 취하고 평균에 대한 벡터곱의 최소자승법을 적용하여 회전축의 좌표를 구한다. 그 때 벡터곱의 최대치의 절대값이 구하는 회전축의 정확도이다. 방사선의 진행방향을 고려할 수 없는 콜리메이터와 치료대에 대해서는 진행방향에 대응하는 것으로 긴 방향이 비대칭인 조사면을 이용하였다. 결과 : 동일한 별모양 무늬에 대해 방사선의 진행방향을 고려할 때 회전축의 기계적 정확성이 진행방향을 무시할 때와 다르게 평가되었다. 결론 : 별모양 무늬를 이용하여 원격치료기의 기계적 정확성을 평가할 때는 방사선의 진행방향을 고려하거나 흉내내어 정량적으로 평가해야 한다.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.500-505
• /
• 2012

Recently, a high speed spindle is an essential part of machine tools to satisfy latest demand of high precision product and machining of hard materials. But, there are many disadvantages such as heat generation of built-in-motor, bearing friction, noise, vibration and displacement because of the high speed. Many researches on spindle systems have been conducted for solving these problems. In this study, technical trend of machine tools spindle systems are analyzed with patent PSM, mapping and grouping. The analysis is carried out for the applied patent during January 2000 and December 2009 in Korea, Japan, EU and U.S.A. And development of the direction, strategy and promising technologies of the spindle system are suggested.

• 전자통신동향분석
• /
• 제34권1호
• /
• pp.98-110
• /
• 2019

Machine learning has been applied to medical imaging and has shown an excellent recognition rate. Recently, there has been much interest in preventive medicine. If data are accessible, machine learning packages can be used easily in digital healthcare fields. However, it is necessary to prepare the data in advance, and model evaluation and tuning are required to construct a reliable model. On average, these processes take more than 80% of the total effort required. In this study, we describe the basic concepts of machine learning, pre-processing and visualization of datasets, feature engineering for reliable models, model evaluation and tuning, and the latest trends in popular machine learning frameworks. Finally, we survey a explainable machine learning analysis tool and will discuss the future direction of machine learning.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.282-287
• /
• 2013

슬롯코팅은 평판 디스플레이의 부품을 위해 유리에 감광제를 코팅방법으로 많이 쓰이고 있다. 갈수록 고화질의 디스플레이가 요구됨에 따라 코팅의 고품질도 요구되고 있다. 슬롯코팅에서 코팅의 품질은 노즐방향의 코팅 균일성과 운전방향의 코팅 균일성으로 평가된다. 노즐방향의 코팅 균일성은 코터다이 내부의 설계에 의존되며 운전방향의 코팅 균일성은 코터다이 외부의 모양과 운전조건에 의존된다. 본 연구에서는 스롯코팅에서 운전방향의 코팅 균일성에 대해서 컴퓨터해석을 통하여 조사하였다. 해석에서 다이 외부의 형상으로 다이 립 각도와 길이를 변수로 하였고, 운전조건으로는 코팅속도를 변수로 하여 코팅 현상을 분석하고 코팅의 품질을 평가하였다. 코팅속도가 커질수록 코팅두께가 얇아지며 코팅의 균일성이 증대되었으나 maniscus형성이 불안정하여 코팅의 안정성은 감소되었다. Down stream 다이 립 각도가 커질수록 코팅두께의 편차는 작아졌으며, Down stream 다이 립 길이가 길수록 코팅 두께는 얇아졌고 안정적인 코팅이 이루어지기까지의 시간이 길어졌다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.336-340
• /
• 1997

This paper is a study about motor technic of motion and feedforward control in order to shape cutting control on the machine tool. The shape error caused by delay of the servo system in the direction of radius at the time of circular cutting is reduced by feedforward control, shape error generated by the position command delay is minimized by using the acceleration/deceleration time constant after the interpolation. The study was verified to optimization of motion control on experiments of a vertical machining center of the machine tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.222-222
• /
• 2000

The general dicing process cuts a semiconductor wafer to lengthwise and crosswise direction by using a rotating circular diamond blade. But inferior goods are made under the influence of several parameters in dicing such as blade, wafer, cutting water and cutting conditions. Moreover we can not applicable this dicing method to GaN wafer, because the GaN wafer is harder than the other wafer as GaAs. In older to overcome this problem, a new dicing process is necessary. This paper describes a new machine using scriber and precision servo mechanism in order to dice a semiconductor wafer.

• 한국의상디자인학회지
• /
• 제24권2호
• /
• pp.1-10
• /
• 2022

The purpose of this study is to analyze the structural properties of 100% wool fabrics knitted with various stitch types and to evaluate dimensional stability from shrinkage in wet cleaning and drying. Materials were weft-knitted from twenty-four different stitches with 7 gauge using a computerized flatbed knitting machine. Weight, thickness, density, and length were measured. A domestic washing machine and a tumble dryer were used for the shrinkage test. The results are as follows: Knitted fabrics were divided into 3 groups based on weight per unit area. Porous knits show light weight whilst milano, pintuck, rib stitches belong to the heaviest group. A positive correlation between weight and thickness was found and the same result was obtained for wale density and weight. Dimensional shrinkage of knitted fabrics was increased during repetitive wet cleaning and drying regardless of knit stitches. Especially, fabrics knitted with float, tuck, cable, and links & links stitches samples were contracted more than 15% in the first treatment whereas 2x1 rib stitch showed 1% shrinkage rate. Fisherman and milano stitches contracted in both course and wale direction with similar shrinkage rates. However, porous knits with float and tuck stitches shrank in course direction by 20% as well as cable samples contracted from 5% to 20% after repeated washing and drying. On the other hand, 30% and 15% contraction of wale direction occurred in orderly float and links & links stitches, respectively. Machine dried knits have a higher shrinkage rate than air-dried knits, but the drying method did not affect to the direction of contraction. In conclusion, variations of knit, tuck, and float stitches affect knit construction and dimensional stability from shrinkage in wet cleaning and drying of wool knitted fabrics.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.357-360
• /
• 2011

Machine tools of Gantry type have been performing machine work as a moving machinery. In a large machine tools, the machinery is moving with bed and it is structurally unstable. When the objects are processed, machine tools gets loads in the direction of Z-axis. In other words, the machine tools which become bigger was performed by the trend of complexation. It made that the increased machine weight can't be passed over. In order to enhance manufacturing precision, it needs to compensate Z-axis deflection of weight for machine tools. In this paper, Machine tools of Gantry type were miniaturized and deflection was measured by LVDT sensors. When deflection was measured, block mass weighted 50kg is moving on particular distance. Then, the displacement of fixed point and moving point is measured by recording telemeter.