• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.53-65
• /
• 2001

Purpose : To improve the local control of patients with nasopharyngeal cancer, we have implemented 3-D conformal radiotherapy and forward intensity modulated radiation therapy (IMRT) to used of compensating filters. Three dimension conformal radiotherapy with intensity modulation is a new modality for cancer treatments. We designed 3-D treatment planning with 3-D RTP (radiation treatment planning system) and evaluation dose distribution with tumor control probability (TCP) and normal tissue complication probability (NTCP). Material and Methods : We have developed a treatment plan consisting four intensity modulated photon fields that are delivered through the compensating tilters and block transmission for critical organs. We get a full size CT imaging including head and neck as 3 mm slices, and delineating PTV (planning target volume) and surrounding critical organs, and reconstructed 3D imaging on the computer windows. In the planning stage, the planner specifies the number of beams and their directions including non-coplanar, and the prescribed doses for the target volume and the permissible dose of normal organs and the overlap regions. We designed compensating filter according to tissue deficit and PTV volume shape also dose weighting for each field to obtain adequate dose distribution, and shielding blocks weighting for transmission. Therapeutic gains were evaluated by numerical equation of tumor control probability and normal tissue complication probability. The TCP and NTCP by DVH (dose volume histogram) were compared with the 3-D conformal radiotherapy and forward intensity modulated conformal radiotherapy by compensator and blocks weighting. Optimization for the weight distribution was peformed iteration with initial guess weight or the even weight distribution. The TCP and NTCP by DVH were compared with the 3-D conformal radiotherapy and intensitiy modulated conformal radiotherapy by compensator and blocks weighting. Results : Using a four field IMRT plan, we have customized dose distribution to conform and deliver sufficient dose to the PTV. In addition, in the overlap regions between the PTV and the normal organs (spinal cord, salivary grand, pituitary, optic nerves), the dose is kept within the tolerance of the respective organs. We evaluated to obtain sufficient TCP value and acceptable NTCP using compensating filters. Quality assurance checks show acceptable agreement between the planned and the implemented MLC(multi-leaf collimator). Conclusion : IMRT provides a powerful and efficient solution for complex planning problems where the surrounding normal tissues place severe constraints on the prescription dose. The intensity modulated fields can be efficaciously and accurately delivered using compensating filters.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.46-55
• /
• 1989

Stomatal variation was observed at the Yeongnam Crop Experiment Station in 1988 using 42 rice cultivars and 30 weed species. The shape, density or size of stomata was varied depending on the species. Two general trends, however, were found that more number of stomata was found at lower leaf epidermis than upper leaf epidermis and stomata number was negatively correlated with stomata size. Aneilema japonica and Portulaca oleracea had the least number of stomata having 17-20 stomata per $m^2$ for upper leaf epidermis and 17-54 stomata for lower leaf epidermis while Polygonum conspicuum had the greatest number of stomata (449 for upper leaf epidermis and 511 for lower leaf epidermis). Soybean, Aeschynomene indica, Ludwigia prostrata and Lactuca indica had the smallest in stomata size while the biggest stomata was found at P. oleracea and A. Japonica that had the least number of stomata. Cyperus species such as C. difformis, C. iria and C. serotinus had no stomata at upper leaf epidermis. The stomata were distributed only at lower leaf epidermis for these species. Potamogeton distinctus, on the other hand, had stomata almost at upper leaf epidermis and thus, hardly found the stomata at lower leaf epidermis. Among rice cultivars, Tongil-type had the greatest number of stomata followed by Indica-type and Japonica-type, in order. Cultivars released after 1960 had more stomata than cultivars released before 1960 for Japonica-type cultivars while stomata size had reversed trend. Jinheung had the least number of stomata (${\fallingdotseq}$ 150 per $mm^2$) while Yushin had the greatest number of stomata (350 for upper and 449 for lower leaf epidermis, respectively) among rice cultivars. Other cultivars having more than 350 stomata per $mm^2$ were Samgangbyeo, Milyang 23, Woonbongbyeo, etc.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.123-130
• /
• 2013

This study was conducted to investigate the effects of climate change on the growth characteristics and dry matter yields of silage corn hybrids in fields of forage crops of Hanwoo Experiment Station, National Institute of Animal Science, RDA, from Apr. 2009 to Sep. 2011. Corn hybrids were cultivated in Daegwallyeong of Gangwon Province, at an altitude of 760 m. Corn varieties used in this study consisted of 5 domestic varieties and 5 foreign varieties. Differences of silk days according to years occurred at an average of 5.5 days. The silk periods of domestic varieties occurred from Aug. 8 to 12, while that of overseas varieties was from Aug. 5 to 11. Silk days of domestic varieties occurred approximately 3 to 4 days earlier than those of oversea varieties. Silk days of Kwangpyeongok and P3156 belonging to the early varieties were Aug. 8 and 5, respectively. Kwangpyeongok and P3156 were Aug. 8 and 5, respectively. Pyeonganok and DK729 belonged to late varieties. The mean plant height of corn was approximately 231 cm, while those of Kwangpyeongok and Pyeonganok were 236 cm and 237 cm, respectively. The mean stem diameter and ear height of corn were approximately 23.2 mm and 94 cm, respectively. In the case of stem diameters, those of Cheonganok and 33J56 were 86 cm and 80 cm, respectively, while Gangdaok grew to a greater height (enter height) than other varieties. Dry matter yields of Kwangpyeongok and Pyeonganok were higher than those of other varieties. The mean leaf ratio of corn was 39.3%, while that of domestic varieties increased as compared to foreign varieties. The average DM yield of corn was 16,653 kg/ha, while those of 32P75, P3156, Pyeonganok, P3394 and Kwangpyeongok were 18,901, 17,997, 17,675, 17,194, 17,188 kg/ha, respectively. Total digestible nutrient (TDN) yields of 32P75, P3156, P3394, Pyeonganok and Kwangpyeongok were 13,381, 12,590, 12,532, 12,140 and 12,036 kg/ha, respectively. Corn crude protein (CP), in vitro dry matter digestibility (IVDMD), neutral detergent fiber (NDF), acid detergent fiber (ADF) and TDN were 7.8%, 74.2%, 42.4%, 23.5% and 70.3%, respectively. In the case of nutritive values of corn, there was no significant difference between of corn varieties of domestic and foreign origin.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.605-622
• /
• 2007

Elemental, Rock-Eval pyrolysis and isotopic analysis of the core sediments from the northwestern and eastern Ulleung Basin of the East were carried out to identify their geochemical characteristics, spatial and vertical variation and origin of organic matter in Upper Quaternary sediments from the northwestern and eastern Ulleung Basin of the East Sea. TOC, m and TS did not show spatial variation between the sampling locations whereas they showed systematic vertical variation associated with MIS stages related to the sea-level change of the East Sea. It is suggested that these past changes of sea-level influenced the sedimentary depositional environments and/or diagenesis which resulted the patterns observed in this study. Based on the results of TOC/N, TS/TOC, ${\delta}^{13}C_{org}\;and\;{\delta}^{15}N_{org}$ analysis, organic matters in the study area appears to be predominantly originated from the marine algae rather than land plant and deposited under normal marine oxic condition during MIS I and MIS III period, and under euxinic/anoxic condition during MIS II period. TOC/N, ${\delta}^{13}C_{org}\;and\;{\delta}^{15}N_{org}$ have a relatively constant value irrespective of MIS stages, implying that the organic matter source does not change by the sea-level fluctuations. However, the results of Rock-Eval pyrolysis indicates that the organic matter is in immature stage and originated from land-plant (Type III), locating in the immature stage land plant (Type III). Similar differences were reported from other areas such as the Atlantic Ocean, Iberia Abyssal Plain, Mediterranean Sea, suggesting that Rock-Eval method does not exactly reflect the characteristic of immature organic matters. Accordingly, the application of Rock-Eval pyrolysis for delineating the source of immature organic matters should be approached with caution and all other geochemical proxies should be considered altogether at the same time.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.295-308
• /
• 1996

1. Retrospect of Political Geographic Studies since Liberation, 1945 : 1) Period from 1945 to mid 1960s : There was not political geography as a science in Korea at the time of liberation from Japan 1945. At that time were not pure political geographers in Korea. In 1947, Moon-Hwa Pyo, economics professor, published a book titled Outline of Korean Geopolitics. This book was a first one in the field of political geography and available at that time in the logical descriptions. Bok-Hyon Choi was a first political geographer who in 1959 wrote a book titled Political geography for the collegians of Seoul National University. Professor Choi introduced American-style political geography through the book above mentioned. In 1963, Kie-Joo Hyong published an article titled "Korean Unification: Possibility from the Geopolitical Viewpoint" which was a first article published by Korean young scholar who studied geography in this country. 2) Period from late 1960s to late 1980s : Both Yoon Cha and Duck-Soon Im published frequently several articles of political geography or geopolitics respectively in 1968-1969. And they issued geopolitical disputes on Korean geopolitical structure and an application of rimland theory to Korean peninsula in 1969 through a magazine named Joung-Kyong Younku (the political and economic researches). The disputes played an important role of showing political geography (or geopolitics) to political sciences especially international political Science. Active researches still continued in 1970s. In that atmosphere the first Korean book of political geography written by a post-liberation scholar (Duck-Soon Im) titled Principles of Political Geography was published in 1973. This book was influenced much by American political geography after Second World War. In 1980s, the researches continued more actively. Especially administrative districts, capital cities, and sub-capital cities were frequently studied during this period. 3) Period from late 1980s to Present: Recent Studies : 1985 was a year of much production of articles of political geography. The first Ph.D thesis of political geography published in the same year in our country. And since 1985 produced many M.A. articles. Several categories of esearches of political geography was made in the period from late 1980s to present. Capital cities, Korean unification, administrative districts, urban politics, elections, sub-capital cities, and defense walls were important research categories. Reviewing the researches from 1945 to present. I found eight categories of political geography in Korea: capital cities, administrative districts, geopolitical structure of Korean peninsula, division and unification of Korea, sub-capital cities, defense walls, elections, and urban politics. Each category includes several scholars respectiveiy. 2. Study Tasks and Prospects in Korean Political Geography: In relation to Korean circumstances there are three study-tasks. The first task of Korean people is unification of two Koreas. Political geographers of Korea must al survey titled Survey Methods of Human Geography for collegians. This book was first one on survey part in Korea. The book however, is insufficient in comprehensiveness in aspects too. I think that the important tasks of general-synoptic human geography in Korea are \circled1 publication of comprehensive books of human geography in the aspects and methodologies for collegians and \circled2 acceptance of academic world of human geography in Korea of variety in methodologies of human geography for future progress. progress.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.701-708
• /
• 1996

Background : To evaluate the effect of the balloon dilatation in tuberculous bronchial stenosis, we performed balloon dilatation in 13 cases which had airway obstruction in main bronchus with the impairment of pulmonary function. Material and Methods: Thirteen women with tuberculous bronchial stenosis(9cases : left main bronchus, 4 cases: right main bronchus) underwent fluoroscopically guided balloon dilatation under the local anesthesia. Among the these patient, 9 cases were active endobronchial tuberculosis, and 4 cases were inactive. Immediate and long term follow-up(average 15.6months) assessments were done focused on change on PIT. The increase of FVC or FEV1 more than 15% after the procedure was considered effective. Complications after dilatation were evaluated in all patients. Result : 1) There were an decrease of self-audible wheezing in 75%(6/8), improvement of dyspnea in 62.5%(5/8), improvement of cough and expectoration in 50%(3/6), and improvement of chest discomfort in 50%(1/2). 2) Significant improvement of PFT was noted in 42.9%(3/7) of which respiratory symptoms duration was below 6 months. 8m, significant improvement of PFT was noted in only 25%(1/4) of which respiratory symptoms duration was above 12 months. 3) Active stage was 69.2%(9/13) and inactive was 30.8%(4/13). There was an significant improvement of PFT in 44.4%(4/9) of active stage, but, only 25%(1/4) of inactive stage was improved. 4) In 61.5%(8/13), FVC and FEV1 were increased to 35.5%, and 22.2% at post-dilatation 7 days. After 1 month later, FVC and FEV1 were increased to 54.7%, and 31.8% in 5 cases(38.5%). 4 cases in which long-term follow-up(average 19.8months) was possible the improvement of FVC, and FEV1 were 30.5%, and 10.1%. 5) Just after balloon dilatation therapy, transient leukocytosis or fever was noted in 30.8%(4/13), and blood-tinged sputum was noted in 30.8%(4/13). However, serious complication, such as pneumothorax, pneumomediastinum or mediastinitis, was not noted. Conclusion : We conclude that tuberculous bronchial stenosis, which is on active stage, and short dulation of respiratory symptoms was more effective on balloon dilatation than inactive stage or long duration of respiratory symptoms. Furthermore, balloon dilatation is easier, much less invasive and expensive than open surgery. and cryotherapy or photoresection. Because of these advantage, we think that balloon dilatation could be the first choice for treating bronchial stenosis and could be done at first in early stage if unresponsiveness with steroid therapy is observed.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.5
• /
• pp.522-529
• /
• 2005

Background : Several national societies have published guidelines for empirical antimicrobial therapy in patients with severe community-acquired pneumonia (SCAP). This study investigated the etiologies of SCAP in the Asan Medical Center and assessed the relationship between the initial empirical antimicrobial regimen and 30 day mortality rate. Method : retrospective analysis was performed on patients with SCAP admitted to the ICU between March 2002 and February 2004 in the Asan Medical Center. The basic demographic data, bacteriologic study results and initial antimicrobial regimen were examined for all patients. The clinical outcomes including the ICU length of stay, the ICU mortality rate, and 30 days mortality rates were assessed by the initial antimicrobial regimen. Results : One hundred sixteen consecutive patients were admitted to the ICU (mean age 66.5 years, 81.9 % male, 30 days mortality 28.4 %). The microbiologic diagnosis was established in 58 patients (50 %). The most common pathogens were S. pneumoniae (n=12), P. aeruginosae (n=9), K. pneumonia (n=9) and S. aureus (n=8). The initial empirical antimicrobial regimens were classified as: ${\beta}$-lactam plus macrolide; ${\beta}$-lactam plus fluoroquinolone; anti-Pseudomonal ${\beta}$-lactam plus fluoroquinolone; Aminoglycoside combination regimen; ${\beta}$-lactam plus clindamycin; and ${\beta}$-lactam alone. There were no statistical significant differences in the 30-day mortality rate according to the initial antimicrobial regimen (p = 0.682). Multivariate analysis revealed that acute renal failure, acute respiratory distress syndrome and K. pneumonae were independent risk factors related to the 30 day mortality rate. Conclusion : S. pneumoniae, P. aeruginosae, K. pneumonia and S. aureus were the most common causative pathogens in patients with SCAP and K. pneumoniae was an independent risk factor for 30 day mortality. The initial antimicrobial regimen was not associated with the 30-day mortality.

• Korean Journal of Agricultural Science
• /
• v.34 no.1
• /
• pp.19-35
• /
• 2007

The present study was carried out to examine the effect of EGF and IGF-I in vitro maturation (IVM) of porcine oocytes and development of porcine IVM/IVF embryos. The results were summarized as follows : 1. The rates of nuclear maturation, penetrated oocytes, pronuclear formation, polyspermic oocytes and mean numbers of the penetrated sperm were not different in NCSU-23 maturation medium with 0, 1, 5 and 10 ng/ml EGF and IGF-I (P>0.05). 2. The rates of blastocyst formation at day 7 after in vitro fertilization in 0, 1, 5 and 10 ng/ml EGF groups were $11.2{\pm}1.5%$, $15.0{\pm}8.3%$, $16.8{\pm}2.8%$ and $21.4{\pm}2.0%$, also 0, 1, 5 and 10 ng/ml IGF-I groups were $11.2{\pm}1.5%$, $15.0{\pm}8.3%$, $16.8{\pm}2.8%$ and $21.4{\pm}2.0%$, respectively. In the total cells case, EGF groups were $22.8{\pm}3.7$, $25.7{\pm}5.5$, $26.0{\pm}4.2$ and $35.1{\pm}4.7$, also IGF-I groups were $21.5{\pm}3.7$, $25.2{\pm}2.8$, $26.2{\pm}2.9$ and $33.2{\pm}3.6$, respectively. Both 10 ng/ml EGF group and 10 ng/ml IGF-I group were significantly higher than those of other treatment groups (P<0.05). 3. The rates of blastocyst formation at day 7 in the NCSU23 culture medium of porcine IVF-produced embryos with 0, 1, 5, and 10 ng/ml EGF groups were $14.0{\pm}1.7%$, $16.2{\pm}1.4%$, $16.9{\pm}1.2%$ and $23.1{\pm}1.6%$, also 0, 1, 5, 10 ng/ml IGF-I groups were $13.6{\pm}1.7$, $15.7{\pm}4.5$, $16.0{\pm}0.2$ and $25.0{\pm}0.8$, respectively. And in the total cells case, EGF grups were $21.8{\pm}2.9$, $25.2{\pm}2.8$, $39.7{\pm}2.7$ and $46.2{\pm}3.6$, also IGF-I groups were $20.7{\pm}2.9$, $26.2{\pm}2.9$, $24.6{\pm}2.4$ and $46.1{\pm}3.5$, respectively. Both 10 ng/ml EGF group and 10 ng/ml IGF-I group were significantly higher than those of any other treatment groups (P<0.05). In conclusion, these results suggested that the addition of 10 ng/ml EGF and IGF-I were effective on the blastocyst formation and total cells of blastocysts.