• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.59-64
• /
• 2002

A facile and precise batch oxidation reaction system allows continuous monitoring of the oxidation rate and cumulated oxygen conversion of xylenes, and the side reactions to carbon monoxide and carbon dioxide may also be studied. The oxidation reaction can be analyzed precisely with the rate and amount of oxygen consumed. The reaction reveals that 4-carboxybenzaldehyde is an unstable intermediate of p-xylene oxidation as the reaction proceeds instantaneously from p-toluic acid to TPA (terephthalic acid). The alkali metals accelerate oxidation, even though they retard the reaction initially. The oxidation rate increases with decreasing water concentration. However, in the later part of reaction, the reactivity decreases a bit if the water concentration is very low. This retarding effect of water can be overcome partly by the addition of potassium. The oxidation of o-xylene, compared with the oxidation of p-xylene and m-xylene, proceeds quite fast initially, however, the oxidation rate of xylene isomers in the later stage of reaction is in the order of p-xylene > mxylene > o-xylene.

• Toxicological Research
• /
• v.11 no.2
• /
• pp.205-213
• /
• 1995

This study was undertaken to investigate the effects of organic solvents on xenobiotic metabollzing enzyme system in vivo by meaas of experimental conditions i.e. (1) single group which was treated by benzene (B), toluene (T) and xylene (X), respectively, (2) combination group which was treated by mixture of benzene+toluene (BT), benzene+xylene (BX), and toluene+xylene (TX), respectively, (3) mixture group which was treated by benzene+ toluene+xylene mixture (M), and to interpreat the interaction between the organic solvents metabolizing enzymes. 1. The contents of cytochrome P-450 in liver microsomes were increased (p < 0.01) in organic solvents treated groups, and the contents of cytochrome P-450 were increased by following order of B < T < M < BT=BX < X < TX. 2. The activity of cytochrome P-450 dependent AHHase was significantly higher in organic solvents treated groups than in control group (p < 0.01), and the activity of AHHase was increased by following order of B < T < BT=BX=TX=xylene < M. 3. The activity of NADPH P-450 reductase was significantly higher in organic solvents treated groups than in control group (p < 0.01), and the order of M < combinated group < X < T

• Carbon letters
• /
• v.3 no.1
• /
• pp.25-32
• /
• 2002

Aligned multi-wall carbon nanotubes (MWNTs) were synthesized through the catalytic decomposition of hydrocarbons in a quartz tube reactor. In this study, we investigated the influence of reaction parameters such as gas flow rate, ferrocene-xylene ratio and partial pressure, and reaction time on the yield and structure of vertically aligned carbon nanotubes produced by the floating catalyst method. The MWNTs produced had diameters in the range of 20~l00 nm, length around $100{\mu}m$ and bulk density about $0.51g/cm^3$ at a pressure of l0000 psi. It was possible to produce MWNTs with much faster growth rate of $12{\mu}m/min$ than that reported previously by the increase of ferrocene-xylene partial pressure.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.658-664
• /
• 2020

Zeolite HY is wet impregnated with Ni (0.1, 0.3, 0.4, 0.5 wt%), Pt (0.1 wt%) and reduced in presence of hydrogen to form nanosized particles of Ni and Pt. All the catalysts were characterized by XRD, TEM, ESCA, NH₃-TPD, Pyridine adsorbed FT-IR and BET. Characterization results confirm that the Ni and Pt fractions effectively rehabilitated the physio-chemical properties of the zeolite HY catalysts. Further, all the reduced catalyst were screened with hydroisomerization of m-xylene at LHSV = 2.0 h^-1 in the temperature range 250-400 ℃ in steps of 50 ℃ in hydrogen atmosphere (20 ml/g). The addition of Ni to Pt catalyst increases hydroisomerization conversion, as well as maximizes p-xylene selectivity by restricting the pore size. The increasing trend in activity continues up to 0.3 wt% of Ni and 0.1 wt% Pt addition over zeolite HY. The increasing addition of Ni increases the total number of active metallic sites to exposed, which increases the metallic sites/acid sites ratio towards the optimum value for these reactions by better balance of synergic effect for stable activity. The rate of deactivation is pronounced on monometallic catalysts. The results confirm the threshold Ni addition is highly suitable for hydroisomerization reaction for product selectivity over Ni-Pt bimetallic/support catalysts.

• Journal of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.26-29
• /
• 1981

Reactions of m-xylene were studied in a fixed-bed type micropulse reactor over cation-exchanged dealuminated mordenite and zeolite Y catalysts. Over H-mordenite catalysts higher catalyst pretreatment temperature as well as dealumination resulted in the increase of the formation of disproportionation product. $Ba^{2+}- and Mg^{2+}-$exchanged mordenite catalysts showed the shape selectivity in the disproportionation reaction of m-xylene, that is, the formation of trimethylbenzene decreasing sharply as the degree of cation exchange increased.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.253-261
• /
• 1991

Polyamic acids, precursor polymers of polyimides have been obtained by the solution polycondensation of benzophenone tetracarboxylic dianhydride (BTDA) with 4, 4'-diamino diphenyl methane (MDA) and/or 3, 3'-dimethyl benzidine (OTB). The reaction was carried in two solvent systems such as m-cresol and m-cresol/xylene mixture. The results of TGA analysis showed that the polyimide films had good thermal stability with the initial decomposition temperature ranging from $540^{\circ}$ to $590^{\circ}$. According to DSC analysis of polymers, the glass transition temperature was over $340^{\circ}$. Polyimide film samples, showed good mechanical and electrical properties, had over $16Kg/mm^2$ of tensile strength and about 200 KV/mm of dielectric breakdown voltage. The properties of the copolymer from MAD/OTB were better than those of the homopolymer from MDA. And the polymer synthesized in m-cresol had lower properties than that obtained in m-cresol/xylene.

• Journal of Preventive Medicine and Public Health
• /
• v.37 no.4
• /
• pp.321-328
• /
• 2004

Objectives : The purpose of this study was to investigate the effect of genetic polymorphism of cytochrome P450 2E1 (CYP2E1) and aldehyde dehydrogenase 2 (ALDH2) on the xylene metabolism. Methods : Among 247 workers, 116 were occupationally exposed to xylene and 131 were not. Workers exposed to xylene had different work such as spray, touch-up, mix & assist, and pre-treat. Questionnaire variables were age, sex, use of personal protective equipment, smoking, previous night's drinking and work duration. The urinary methylhippuric acid was measured in the urine collected in the afternoon and corrected by urinary creatinine concentration. The genotypes of CYP2E1 and ALDH2 were investigated by using PCR-RFLP (polymerase chain reaction-restriction fragment length polymorphism) methods with DNA extracted from venous blood. Results : 1. The urinary concentrations of o-, m-, and p-methylhippuric acid and total methylhippuric acid in the exposed group were significantly higher than those in the non-exposed group (p<0.001). 2. In multiple regression analysis, the urinary methylhippuric acid concentration was significantly influenced by exposure grade (Job-exposure matrixes), smoking, drug use and kind of protective equipment (p<0.1). 3. Genetic polymorphism of CYP2E1 and ALDH2 did not affect urinary methylhippuric acid level in the exposed group (p>0.05). Conclusions : Exposure grade, smoking, drug use and kind of protective equipment affected urinary methylhippuric acid level, whereas genetic polymorphism of CYP2E1 and ALDH2 did not. However, further investigation for the effect of genetic polymorphism on the metabolism of xylene with a larger sample size is needed.

• Membrane Journal
• /
• v.22 no.2
• /
• pp.120-127
• /
• 2012

In this study, separation of ethylbenzene from mixed xylene was performed by using TS-1 zeolite membrane. TS-1 zeolite membranes were prepared by microwave synthesis and changing the reaction temperature. MFI-type TS-1 membranes are synthesized on alumina tubes by functional coating using 3-chloropropyltrimethoxysilane (3CP-TMS). On top surface of interlayer, nano TS-1 crystals were seeded. To form interlayer, microwave-assisted growth of TS-1 zeolite was carried out and thin zeolite layers were produced. All of the prepared membranes are tested to separate ethylbenzene from mixed xylene at different operating temperatures. TS-1 membrane with zeolite seed synthesized at $170^{\circ}C$ compared to 120, $140^{\circ}C$ shows the best ethylbenzene separation at the operation temperature of $200^{\circ}C$ from ternary mixed xylene containing certain composition of ethylbenzene/p-xylene/m-xylene. (separation factor : 2.64, ethylbenzene flux : 1703.0 mol/$m^2{\cdot}s{\cdot}Pa$).

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.88-94
• /
• 2016

The simultaneous biodegradation between MTBE (Gasoline additives) and BTEX (Benzene, Toluene, Ethyl-benzene, o-Xylene, m-Xylene, p-Xylene) was achieved within a competitive inter-relationship, with not only electron accepters such as nitrate, sulfate, and iron(III) without oxygen, but also with electron donors such as MTBE and BTEX. Preexisting indigenous microorganisms from a domestic sample of gasoline contaminated soil was used for a lab-scale batch test. The result of the test showed that the biodegradation rate of MTBE decreased when there was co-existing MTBE and BTEX, compared to having just MTBE present. The growth of indigenous microorganisms was not affected in the case of the MTBE treatment, whereas the growth of the microorganisms was decreased in combined MTBE and BTEX sample. This may indicate that an inhibitor related to biodegradation when BTEX and MTBE are mixed will be found. This inhibitor may be found to retard the anaerobic conditions needed for efficient breakdown of these complex carbon chain molecules in-situ. Moreover, it is also possible that an unknown competitive reaction is being imposed on the interactions between MTBE and BTEX dependent on conditions, ratios of mixture, etc.

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.317-326
• /
• 1993

The acid catalytic reactions of toluene with n-propylalcohol were investigated and the adsorption experiments of dialkylbenzene isomers were carried out at 100$^{\circ}C$ over modified HZSM-5 zeolites. ZSM-5 zeolite was synthesized by the hydrothermal reaction using 4-propylammonium ion, sodium aluminate and colloidal silica etc., and several zeolite catalysts, including H-, K-, Sr-, P-Mg-HZSM-5, H-Y and H-mordenite, were prepared by conventional methods. The main reaction products of toluene with n-propylalcohol over HZSM-5 catalyst include not only xylenes, propyltoluenes, but also ethyltoluenes and high para-selectivity among dialkylbenzene isomers was observed on P-Mg-HZSM-5 zeolite. The diffusion coefficients of various p-dialkylbenzenes are nearly the same, about 1 ${times}$ 10$^{-10}$ cm$^2$/sec and that of m-xylene was about one tenth of o-xylene. These reaction and adsorption characteristics were interpreted in the light of the shape-selectivity related to related to the zeolite pore structure and the zeolitic acidity.