• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.901-902
• /
• 2003

Three-color organic light-emitting diodes (OLEDs) of metal-semiconductor-metal (MSM) structure have been favricated by using m-MTDATA [4,4',4"-tris (3-methylphenylphenylamino) triphenylamine] as hole injection layer(HIL). The mMTDATA is shown to be an effective hole injecting material, in that the insertion of mMTDATA greatly reduces the roughness of anode surface and improves the device performance. Red, green and blue OLEDs were fabricated, and their color coordinates in CIE chromaticity were found to be (0.600, 0.389), (0.240, 0.525), and (0.171, 0.171), respectively. The luminous efficiencies of the fabricated OLEDs were 1.4 lm/W at 106 $cd/m^{2}$ for red, 1.4 lm/W at 100 $cd/m^{2}$ for green, and 2.0 lm/W at 104 $cd/m^{2}$ for blue.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.83-84
• /
• 2006

ITO/4, 4', 4"-tris (N -3 - methylphenyl - N - phenyl - amino) - triphenylamine, [m-MTDATA] / Terbium Iris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$] / Mg:Ag devices were made to investigate its electrical and light emission properties. The thickness of m-MTOATA layer was varied from 0 to 80 nm. There was a threshold thickness for the sufficient hole injection. The insertion of 20 nm thick m-MTDATA layer between ITO and Tb-complex resulted in the right shift of current-voltage curve because of the insufficient hole injection. The low operating voltage can be obtained above the 40 nm of m-MTDATA layer. The insertion of m-MTDATA induced the increase of the background in the electroluminescence spectrum which was dependent on the current density of the devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1408-1409
• /
• 2005

Organic light-emitting diodes (OLEDs) of metalsemiconductor-metal (MSM) structure have been fabricated by using m-MTDATA [4,4',4"-tris (3-methylphenylphenylamino) triphenylamine] as a hole-injection layer (HIL). The m-MTDATA is shown to be an effective hole-injecting material for the OLED, in that the insertion of m-MTDATA greatly reduces the roughness of anode surface and improves the device performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.271-271
• /
• 2011

차세대 디스플레이로 각광 받고 있는 유기발광소자는 다른 디스플레이에 비해서 빠른 응답속도, 넓은 시야각 및 고휘도의 장점을 가지고 있으나 낮은 색순도, 전압에 따른 색 안정성의 변이 및 색조절의 문제점을 가지고 있다. 유기발광소자의 발광층과 낮은 이온화 에너지를 갖는 tris(3-methylphenylphenylamino)triphenylamine (m-MTDATA) 정공수송층 표면에서 엑시플렉스 발광에 의한 적색편이 현상으로 인해 발광색의 순도가 저하하거나 색 조절이 어려운 문제점이 생긴다. 엑시플렉스 발광현상을 조사하기 위해서 정공수송층으로 m-MTDATA를 사용하고 tris-(8-hydroxyquinoline) aluminum (Alq3)와 2,4-bis(dicyanomethylene)-6-(p-dimethylaminostyryl)-4H-pyran (DCM1)을 발광층으로 사용하여 계면에서 발생되는 엑시플렉스 발광특성에 대해서 관찰 하였다. 낮은 전압에서는 정공수송층과 발광층에서 엑시플렉스 발광에 의한 발광스펙트럼의 적색편이가 나타났으며, 전압이 증가할수록 엑시플렉스에 의한 발광 현상이 감소하면서 색순도가 증진되었다. 유기발광소자에서 색안정성 증진과 관련된 엑시플렉스 발광 메커니즘을 실험 결과를 사용하여 기술할 것이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.955-958
• /
• 2003

We report the photo-(PL) and electroluminescence (EL) properties of new conjugated compounds based on diphenyl benzeneamine moiety, 4,4'-(1,4-phenylenedi-(1E)-2,1-ethenediyl]bis(N,N-diphenyl-benzenamine](PEDB) and 4,4'-([1,1 -biphenyl]-4,4'-diyldi-2,1-ethenediyl)bis[N,N-diphenyl-benzenamine)(BPEDB), as emitting materials and dopant materials. The ITO/m-MTDATA/NPB/DPVBi + BPEDB(1%) /Alq3/LiF/Al device shows blue EL spectrum at 458nm and high efficiency(5.3 cd/A). PEDB as dopant shows also blue EL spectrum around ${\lambda}$ max=463nm and 4.1 cd/A high efficiency in ITO/m-MTDATA/NPB/DPVBi + PEDB(1%)/Alq3/LiF/Al device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.952-954
• /
• 2003

We report the photo-(PL) and electroluminescence (EL) properties of new conjugated compounds based on carbazolyl vinylene moiety, 3,3'-(1,4-phenylene di-2,1-ethenediyl) bis[9-ethyl-(E,E)-9H-carbazole](PEEC) and 3,3'-([1,1'-biphenyl]-4,4'-diyldi-2,1-ethenediyl)bis[9-ethyl-9H-carbazole](BPEEC), as emitting materials. The ITO/m-MTDATA/NPB/BPEEC/Alq3/LiF/Al device shows bluish-green EL spectrum at 490nm and turn-on voltage at 8V. PEEC shows bluish-green EL around ${\lambda}$ max=496nm and turn-on voltage at 6V and 2.4 Cd/A efficiency in ITO/m-MTDATA/NPB/PEEC/Alq3/LiF/Al device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1121-1124
• /
• 2003

We report the photo (PL) and electro luminescence (EL) properties of new conjugated compounds based on imidazole moiety, 4,4' -di(4,5 diphenyl-N-imidazolyl)stilbene(DDPIS) and 4,4'-di(2,4,5-triphenyl-N-imidazolyl)stilbene(DTPIS), as emitting materials. ITO/m-MTDATA/NPB/DDPIS/Alq3/LiF/AI device shows blue EL spectrum at 456 ㎚ and 0.3 cd/ A and turn on voltage at 7 ∼ 8 V. DTPIS shows blue EL spectrum at around λmax=453㎚ and 0.5 cd/A efficiency in ITO/m-MTDATA/NPB/DTPIS/Alq3/LiF/Al device.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.365-368
• /
• 2008

Feasibility test for radical reactions in organic light emitting diode(OLED) has been applied on OLED consisting of hole transport layer(HTL) and electron transport layer(ETL). Organic molecules such as 4,4',-Bis[N-(1-naphthyl)-N-phenylamino] biphenyl(NPD) and 4,4',4"-tris(3-methylphenylphenylamino)triphenylamine(m-MTDATA) are chosen for hole transport layer(HTL) and Bathocuproine(BCP) for electron transport layer(ETL) in this study. Informations on energy and shape of frontier orbitals and data on radical reactions of simple aromatics from semiconductor($TiO_2$) photocatalysis have provided basis for determining feasibility for radical reactions in OLED. The outcome of our feasibility test would be useful in designing optimum molecule for organic layer with a view to extending the lifetime of OLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.956-960
• /
• 2006

Deep-blue organic light-emitting diodes (OLEDs) with/without ultra-thin LiF layer inserted at the interface between hole-blocking and electron-transporting layers have been fabricated and investigated. The fundamental structures of the OLEDs are ITO/m-MTDATA/NPB/BCP/LiF (with/ without)/ $Alq_3/LiF/Al.Deep$ blue light emission with CIE coordinate of (0.15, 0.11) has been achieved for all devices. Further, by inserting LiF with thickness of 1nm at the interface between BCP and $Alq_3$ layer, the luminous efficiency as well as the power efficiency is much improved compared to that without. The enhancement of electron injection due to insertion of LiF may account for this improvement.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.545-550
• /
• 2005

We have carried out the fabrications of a barrier layer on a polyethersulfon (PES) film and organic light emitting diode (OLED) based on a plastic substrate by means of atomic layer deposition (ALD). Simultaneous deposition of 30 nm $AlO_x$ film on both sides of the PES film gave a water vapor transition rate (WVTR) of $0.062 g/m^2/day (@38^{\circ}C,\;100%\;R.H.)$. Further, the double layer of 200 nm $SiN_x$ film deposited by plasma enhanced chemical vapor deposition (PECVD) and 20 nm $AlO_x$ film by ALD resulted in a WVTR value lower than the detection limit of MOCON. We have investigated the OLED encapsulation performance of the double layer using the OLED structure of ITO / MTDATA (20 nm) / NPD (40 nm) / AlQ (60 nm) / LiF (1 nm) / Al (75 nm) on a plastic substrate. The preliminary life time to reach 91% of the initial luminance $(1300 cd/m^2)$ was 260 hours for the OLED encapsulated with 100 nm of PECVD-deposited $SiN_x$ and 30 nm of ALD-deposited $AlO_x$.