• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.37-45
• /
• 2004

As Internet technologies are mature, many new applications that are different characteristics are emerging. Recently we see wide use of P2P(Peer to Peer) applications of which traffic shows different statistical characteristics compared with traditional application such as web(HTTP) and FTP(File Transfer Protocol). In this paper, we measured subscriber network of KT(Korea Telecom) to analyze P2P traffic characteristics. We show flow characteristics of measured traffic. We also estimate Hurst parameter of P2P traffic and compare self-similarity with web traffic. Analysis results indicate that P2P traffic is much bustier than web traffic and makes both upstream traffic and downstream traffic be symmetric. To predict parameters related QoS such as packet loss and delays we model P2P traffic using two self-similar traffic models and predict both loss probability and mm delay then compare their accuracies. With simulation we show that the self-similar traffic models we derive predict the performance of P2P traffic accurately and thus when we design a network or evaluate its performance, we can use the P2P traffic model as reference input traffic.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.433-433
• /
• 2011

수자원 계획 및 관리를 위한 지표 자료로서 일유량은 매우 유용하기 때문에 정확한 일유량 산정의 문제는 매우 중요하다. 그러나 우리나라의 경우 조석이나 배수 갑문 혹은 보 등에 의한 배수 영향으로 인해 수위-유량관계곡선식만으로 정상적인 유량산정이 어려운 지점이 다수 존재한다. 특히, 한강대교 지점과 같이 조석영향 구간에서 수위-유량관계곡선식에 의해 산정된 일유량은 자료에 대한 곡선식의 적합도 문제로 그 정확도가 매우 낮았다. 최근 자동유량측정에 의해 시간단위 이하의 실시간 유량이 생산되고 있고 이를 이용하여 일유량을 환산하고 있어 과거에 비해 보다 정확한 일유량 산정이 가능해 졌다. 그러나 신뢰도 있는 일유량을 안정적으로 제공하기 위해서는 보다 다양한 조건을 고려한 비교 검증 연구가 요구되는 실정이다. 이러한 배경에서 본 연구에서는 한강대교 지점과 같이 조석영향을 받는 지점의 일유량 산정방법 및 산정개념에 따른 유황의 차이와 적정성을 평가하여 보았다. 각 산정방법 및 산정개념 별로 산정된 일유량을 통해 유황을 산정하여 한강대교 지점의 일유량 산정방법에 대한 적정성을 평가하고 적절한 유황산정을 위한 목적별 대안을 제시하였다. 산정방법 별로는 기존의 수위-유량관계 곡선식으로 변환된 자료, 자동유량측정자료, 그리고 자동유량측정자료에서 조석성분을 제거한 순수 유출성분자료를 이용하여 일유량을 산정하였고, 이를 이용하여 산정된 유황에 대한 비교 분석을 실시하였다. 수위-유량관계곡선식에 의한 일유량은 수문조사연보의 자료를 이용하였고 자동유량자료를 이용한 일유량은 시자료를 평균하여 일유량으로 환산하는 방법을 사용하였다. 자동유량 자료에서 조석성분을 제거한 순수 유출성분의 추출은 웨이블릿 변환(wavelet transform)을 이용하였다. 각 방법별로 산정된 일유량을 비교한 결과 수위-유량관계곡선식에 의해 산정된 일유량이 자동 유량자료로 산정된 일유량에 비해 전반적으로 크게 나타났고, 2009년 한해 동안의 유출용적을 비교해 본 결과 18%정도 더 크게 산정되었다. 산정개념에 따른 비교에서는 조석성분 유량의 유효성 여부에 따른 유황을 비교하였으며, 조석성분 유량도 실효적 유량으로 간주한 경우 이론적 확률 분포형에 적합시켜 산정한 평균 갈수량은 15.7 ��/s(동절기 이상 거동기간인 2009년 11월 17일-12월 12일 기간을 제외하고 산정된 결과이나 불확실성은 잔존)에서 $53.2m^3/s$로 증가하였다. 따라서 유지유량의 목적상 경관용수나 생태용수가 중요한 지점으로 조석성분 유량이 이에 유효하다면, 유황산정을 위한 한강대교 지점의 일유량 산정방법은 다양한 목적에 비추어 추가적인 분석 검토가 필요할 것으로 판단된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.321-329
• /
• 2013

Despite the advantage of unlimited access, there are insufficient studies for the accuracy and stability of FKP that blocks the spread of the system for various applications. Therefore, we performed a long-term analysis from continuous real-time positioning, and investigated the error characteristics dependent on the size and the surrounding environment. The FKP shows significant changes in the positioning accuracy at different times of day, where the accuracy during daytime is worse than that of nighttime. In addition, the size and deviation of FKP correction may change with the ionospheric conditions, and high correlation between ambiguity resolution rate and the deviation of correction was observed. The receivers continuously request the correction information in order to cope with sudden variability of ionosphere. On the other hand, the correction information was not received up to an hour in case of stable ionospheric condition. It is noteworthy that the outliers of FKP are clustered in their position with some biases. Since several meters of errors can be occurred for kinematic positioning with FKP, therefore, it is necessary to make appropriate preparation for real-time applications.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.83-90
• /
• 2010

In wireless sensor networks, the data transmitted from the sensor nodes are susceptible to corruption by errors which caused of noisy channels and other factors. In view of the severe energy constraint in Sensor Networks, it is important to use the error control scheme of the energy efficiently. In this paper, we presented RS (Reed-Solomon) codes in terms of their BER performance and power consumption. RS codes work by adding extra redundancy to the data. The encoded data can be stored or transmitted. It could have errors introduced, when the encoded data is recovered. The added redundancy allows a decoder to detect which parts of the received data is corrupted, and corrects them. The number of errors which are able to be corrected by RS code can determine by added redundancy. The results of experiment validate the performance of proposed method to provide high degree of reliability in low-power communication. We could predict the lifetime of RS codes which transmitted at 32 byte a 1 minutes. RS(15, 13), RS(31, 27), RS(63, 57), RS(127,115), and RS(255,239) can keep the days of 173.7, 169.1, 163.9, 150.7, and 149.7 respectively. The evaluation based on packet reception ratio (PRR) indicates that the RS(255,239) extends a sensor node's communication range by up about 3 miters.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.380-386
• /
• 2002

Conventional post-processing as like confidence measure (CM) proposed by Rahim calculates phones' CM using the likelihood between phoneme model and anti-model, and then word's CM is obtained by averaging phone-level CMs[1]. In conventional method, CMs of some specific keywords are tory low and they are usually rejected. The reason is that statistics of phone-level CMs are not consistent. In other words, phone-level CMs have different probability density functions (pdf) for each phone, especially sri-phone. To overcome this problem, in this paper, we propose normalized confidence measure. Our approach is to transform CM pdf of each tri-phone to the same pdf under the assumption that CM pdfs are Gaussian. For evaluating our method we use common keyword spotting system. In that system context-dependent HMM models are used for modeling keyword utterance and contort-independent HMM models are applied to non-keyword utterance. The experiment results show that the proposed NCM reduced FAR (false alarm rate) from 0.44 to 0.33 FA/KW/HR (false alarm/keyword/hour) when MDR is about 8%. It achieves 25% improvement of FAR.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.45-55
• /
• 2015

Currently, extreme weather events such as super typhoon, extreme snowfall, and heat wave are frequently occurring all over the world by natural and human caused factors. After industrial growth in the 1970s, earth's temperature has risen sharply. due to greenhouse effect. Global warming can be attributed to gases emitted from using fossil fuel such as average carbon dioxide, perfluorocarbons, nitrous oxide, and methane. Especially, carbon dioxide has the highest composition of about 90%. in the fossile fuel usage emitted gas. Concrete has excellent durability as a building material climate change. However, due to various of physical and chemical environmental effect such as conditions during its curing process, the performance degradation may occur. Carbon dioxide in the atmosphere causes steel corrosion and durability decreases by lowering the alkalinity of concrete. Therefore, in this study, concrete durability performance with respect to carbonation from curing conditions change due to wind speed and sunshine exposure time. Concrete carbonation experiment are performed. using wind speed (0, 2, 4, 6) m/s and sunlight exposure time (2, 4, 6, 8) hrs. Also, performance based evaluation through the satisfaction curve based on the carbonation depth and carbonation rate test results are performed.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.41-49
• /
• 2005

We have developed a random heterogeneous velocity model with bimodal distribution in methane hydrate-bearing Bones. The P-wave well-log data have a von Karman type autocorrelation function and non-Gaussian distribution. The velocity histogram has two peaks separated by several hundred metres per second. A random heterogeneous medium with bimodal distribution is generated by mapping of a medium with a Gaussian probability distribution, yielded by the normal spectral-based generation method. By using an ellipsoidal autocorrelation function, the random medium also incorporates anisotropy of autocorrelation lengths. A simulated P-wave velocity log reproduces well the features of the field data. This model is applied to two simulations of elastic wane propagation. Synthetic reflection sections with source signals in two different frequency bands imply that the velocity fluctuation of the random model with bimodal distribution causes the frequency dependence of the Bottom Simulating Reflector (BSR) by affecting wave field scattering. A synthetic cross-well section suggests that the strong attenuation observed in field data might be caused by the extrinsic attenuation in scattering. We conclude that random heterogeneity with bimodal distribution is a key issue in modelling hydrate-bearing Bones, and that it can explain the frequency dependence and scattering observed in seismic sections in such areas.

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.552-560
• /
• 2020

Listeria monocytogenes is a highly pathogenic gram-positive bacterium that is easily isolated from cheese, meat, processed meat products, and smoked salmon. A zero-tolerance (n=5, c=0, m=0/25 g) criteria has been applied for L. monocytogenes in cheese meaning that L. monocytogenes must not be detected in any 25 g of samples. However, there was a lack of scientific information behind this criteria. Therefore, in this study, we conducted a risk assessment based on literature reviews to provide scientific information supporting the baseline and to raise public awareness of L. monocytogenes foodborne illness. Quantitative risk assessment of L. monocytogenes for cheese was conducted using the following steps: exposure assessment, hazard characterization, and risk characterization. As a result, the initial contamination level of L. monocytogenes was -4.0 Log CFU/g in cheese. The consumption frequency of cheese was 11.8%, and the appropriate probability distribution for amount of cheese consumed was a Lognormal distribution with an average of 32.5 g. In conclusion, the mean of probabilities of foodborne illness caused by the consumption of cheese was 5.09×10-7 in the healthy population and 4.32×10-6 in the susceptible population. Consumption frequency has the biggest effect on the probability of foodborne illness, but storage and transportation times have also been found to affect the probability of foodborne illness; thus, management of the distribution environment should be considered important. Through this risk assessment, scientific data to support the criteria for L. monocytogenes in cheese could be obtained. In addition, we recommend that further risk assessment studies of L. monocytogenes in various foods be conducted in the future.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.529-538
• /
• 1993

A stochastic way using continuous time Markov process is presented to model the one-dimensional nuclide transport in fractured rock matrix as an extended study for previous work ［1］. A nuclide migration model by the continuous time Markov process for single planar fractured rock matrix, which is considered as a transient system where a process by which the nuclide is diffused into the rock matrix from the fracture may be no more time homogeneous, is compared with a conventional deterministic analytical solution. The primary desired quantities from a stochastic model are the expected values and variance of the state variables as a function of time. The time-dependent probability distributions of nuclides are presented for each discretized compartment of the medium given intensities of transition. Since this model is discrete in medium space, parameters which affect nuclide transport could be easily incorporated for such heterogeneous media as the fractured rock matrix and the layered porous media. Even though the model developed in this study was shown to be sensitive to the number of discretized compartment showing numerical dispersion as the number of compartments are decreased, with small compensating of dispersion coefficient, the model agrees well to analytical solution.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.2
• /
• pp.34-44
• /
• 2024

Recently, due to abnormal climate caused by climate change, natural disasters such as floods, landslides, and soil outflows are rapidly increasing. In Korea, more than 63% of the land is vulnerable to slope disasters due to the geographical characteristics of mountainous areas, and in particular, Quarry mines soil and rocks, so there is a high risk of landslides not only inside the workplace but also outside.Accordingly, this study built a DEM using UAV and aviation LiDAR for monitoring the quarry, conducted a time series change analysis, and proposed an optimal DEM construction method for monitoring the soil collection site. For DEM construction, UAV and LiDAR-based Point Cloud were built, and the ground was extracted using three algorithms: Aggressive Classification (AC), Conservative Classification (CC), and Standard Classification (SC). UAV and LiDAR-based DEM constructed according to the algorithm evaluated accuracy through comparison with digital map-based DEM.